diff --git a/etc/c/zlib.d b/etc/c/zlib.d index 9af90b843..c4efe2d3b 100644 --- a/etc/c/zlib.d +++ b/etc/c/zlib.d @@ -1,11 +1,12 @@ /* zlib.d: modified from zlib.h by Walter Bright */ +/* updated from 1.2.1 to 1.2.3 by Thomas Kuehne */ module etc.c.zlib; /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.1, November 17th, 2003 + version 1.2.3, July 18th, 2005 - Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -34,7 +35,8 @@ module etc.c.zlib; extern (C): -char[] ZLIB_VERSION = "1.2.1"; +char[] ZLIB_VERSION = "1.2.3"; +const ZLIB_VERNUM = 0x1230; /* The 'zlib' compression library provides in-memory compression and @@ -49,24 +51,22 @@ char[] ZLIB_VERSION = "1.2.1"; application must provide more input and/or consume the output (providing more output space) before each call. - The compressed data format used by the in-memory functions is the zlib - format, which is a zlib wrapper documented in RFC 1950, wrapped around a - deflate stream, which is itself documented in RFC 1951. + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. The library also supports reading and writing files in gzip (.gz) format with an interface similar to that of stdio using the functions that start with "gz". The gzip format is different from the zlib format. gzip is a gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + This library can optionally read and write gzip streams in memory as well. + The zlib format was designed to be compact and fast for use in memory and on communications channels. The gzip format was designed for single- file compression on file systems, has a larger header than zlib to maintain directory information, and uses a different, slower check method than zlib. - This library does not provide any functions to write gzip files in memory. - However such functions could be easily written using zlib's deflate function, - the documentation in the gzip RFC, and the examples in gzio.c. - The library does not install any signal handler. The decoder checks the consistency of the compressed data, so the library should never crash even in case of corrupted input. @@ -92,7 +92,7 @@ struct z_stream free_func zfree; /* used to free the internal state */ void* opaque; /* private data object passed to zalloc and zfree */ - int data_type; /* best guess about the data type: ascii or binary */ + int data_type; /* best guess about the data type: binary or text */ uint adler; /* adler32 value of the uncompressed data */ uint reserved; /* reserved for future use */ } @@ -100,7 +100,30 @@ struct z_stream alias z_stream* z_streamp; /* - The application must update next_in and avail_in when avail_in has + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +struct gz_header { + int text; /* true if compressed data believed to be text */ + ulong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + byte *extra; /* pointer to extra field or Z_NULL if none */ + uint extra_len; /* extra field length (valid if extra != Z_NULL) */ + uint extra_max; /* space at extra (only when reading header) */ + byte *name; /* pointer to zero-terminated file name or Z_NULL */ + uint name_max; /* space at name (only when reading header) */ + byte *comment; /* pointer to zero-terminated comment or Z_NULL */ + uint comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} + +alias gz_header* gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped to zero. It must update next_out and avail_out when avail_out has dropped to zero. The application must initialize zalloc, zfree and opaque before calling the init function. All other fields are set by the @@ -174,6 +197,7 @@ enum Z_FILTERED = 1, Z_HUFFMAN_ONLY = 2, Z_RLE = 3, + Z_FIXED = 4, Z_DEFAULT_STRATEGY = 0, } /* compression strategy; see deflateInit2() below for details */ @@ -181,8 +205,10 @@ enum enum { Z_BINARY = 0, - Z_ASCII = 1, + Z_TEXT = 1, Z_UNKNOWN = 2, + + Z_ASCII = Z_TEXT } /* Possible values of the data_type field (though see inflate()) */ @@ -258,6 +284,10 @@ int deflate(z_streamp strm, int flush); and with zero avail_out, it must be called again after making room in the output buffer because there might be more output pending. + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumualte before producing output, in order to + maximize compression. + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is flushed to the output buffer and the output is aligned on a byte boundary, so that the decompressor can get all input data available so far. (In particular @@ -269,7 +299,7 @@ int deflate(z_streamp strm, int flush); Z_SYNC_FLUSH, and the compression state is reset so that decompression can restart from this point if previous compressed data has been damaged or if random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - the compression. + compression. If deflate returns with avail_out == 0, this function must be called again with the same value of the flush parameter and more output space (updated @@ -294,8 +324,8 @@ int deflate(z_streamp strm, int flush); deflate() sets strm->adler to the adler32 checksum of all input read so far (that is, total_in bytes). - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered binary. This field is only for information purposes and does not affect the compression algorithm in any manner. @@ -379,11 +409,11 @@ int inflate(z_streamp strm, int flush); The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much output as possible to the output buffer. Z_BLOCK requests that inflate() stop - if and when it get to the next deflate block boundary. When decoding the zlib - or gzip format, this will cause inflate() to return immediately after the - header and before the first block. When doing a raw inflate, inflate() will - go ahead and process the first block, and will return when it gets to the end - of that block, or when it runs out of data. + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. The Z_BLOCK option assists in appending to or combining deflate streams. Also to assist in this, on return inflate() will set strm->data_type to the @@ -415,7 +445,7 @@ int inflate(z_streamp strm, int flush); because Z_BLOCK is used. If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm-adler to the adler32 checksum of the dictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise it sets strm->adler to the adler32 checksum of all output produced so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described @@ -495,7 +525,8 @@ int deflateInit2(z_streamp strm, 16 to windowBits to write a simple gzip header and trailer around the compressed data instead of a zlib wrapper. The gzip header will have no file name, no extra data, no comment, no modification time (set to zero), - no header crc, and the operating system will be set to 255 (unknown). + no header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. The memLevel parameter specifies how much memory should be allocated for the internal compression state. memLevel=1 uses minimum memory but @@ -514,7 +545,9 @@ int deflateInit2(z_streamp strm, Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy parameter only affects the compression ratio but not the correctness of the - compressed output even if it is not set appropriately. + compressed output even if it is not set appropriately. Z_FIXED prevents the + use of dynamic Huffman codes, allowing for a simpler decoder for special + applications. deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid @@ -541,7 +574,9 @@ int deflateSetDictionary(z_streamp strm, ubyte* dictionary, uint dictLength); deflateInit or deflateInit2, a part of the dictionary may in effect be discarded, for example if the dictionary is larger than the window size in deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. + put at the end of the dictionary, not at the front. In addition, the + current implementation of deflate will use at most the window size minus + 262 bytes of the provided dictionary. Upon return of this function, strm->adler is set to the adler32 value of the dictionary; the decompressor may later use this value to determine @@ -585,6 +620,59 @@ int deflateReset(z_streamp strm); stream state was inconsistent (such as zalloc or state being NULL). */ +int inflatePrime(z_streamp strm, int bits, int value); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +int inflateGetHeader(z_streamp strm, gz_headerp head); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK can be used to + force inflate() to return immediately after header processing is complete + and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When + any of extra, name, or comment are not Z_NULL and the respective field is + not present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + int deflateParams(z_streamp strm, int level, int strategy); /* Dynamically update the compression level and compression strategy. The @@ -604,7 +692,21 @@ int deflateParams(z_streamp strm, int level, int strategy); if strm->avail_out was zero. */ -uint deflateBound(z_streamp strm, uint sourceLen); +int deflateTune(z_streamp strm, int good_length, int max_lazy, int nice_length, + int max_chain); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +int deflateBound(z_streamp strm, uint sourceLen); /* deflateBound() returns an upper bound on the compressed size after deflation of sourceLen bytes. It must be called after deflateInit() @@ -626,6 +728,29 @@ int deflatePrime(z_streamp strm, int bits, int value); stream state was inconsistent. */ +int deflateSetHeader(z_streamp strm, gz_headerp head); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + int inflateInit2(z_streamp strm, int windowBits) { return inflateInit2_(strm, windowBits, ZLIB_VERSION, z_stream.sizeof); @@ -659,24 +784,28 @@ int inflateInit2(z_streamp strm, int windowBits) windowBits can also be greater than 15 for optional gzip decoding. Add 32 to windowBits to enable zlib and gzip decoding with automatic header detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is + a crc32 instead of an adler32. inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative - memLevel). msg is set to null if there is no error message. inflateInit2 - does not perform any decompression apart from reading the zlib header if - present: this will be done by inflate(). (So next_in and avail_in may be - modified, but next_out and avail_out are unchanged.) -*/ + memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg + is set to null if there is no error message. inflateInit2 does not perform + any decompression apart from reading the zlib header if present: this will + be done by inflate(). (So next_in and avail_in may be modified, but next_out + and avail_out are unchanged.) +/ int inflateSetDictionary(z_streamp strm, ubyte* dictionary, uint dictLength); /* Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate - if this call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by this call of - inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary). + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a parameter is invalid (such as NULL dictionary) or the stream state is @@ -1102,6 +1231,12 @@ int gzeof(gzFile file); input stream, otherwise zero. */ +int gzdirect(gzFile file); +/* + Returns 1 if file is being read directly without decompression, otherwise + zero. +*/ + int gzclose(gzFile file); /* Flushes all pending output if necessary, closes the compressed file @@ -1150,12 +1285,20 @@ void gzclearerr (gzFile file); if (adler != original_adler) error(); */ +uint adler32_combine(uint adler1, uint adler2, z_off_t len2); +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + uint crc32(uint crc, ubyte *buf, uint len); /* - Update a running crc with the bytes buf[0..len-1] and return the updated - crc. If buf is NULL, this function returns the required initial value - for the crc. Pre- and post-conditioning (one's complement) is performed - within this function so it shouldn't be done by the application. + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. Usage example: uint crc = crc32(0L, Z_NULL, 0); @@ -1166,6 +1309,16 @@ uint crc32(uint crc, ubyte *buf, uint len); if (crc != original_crc) error(); */ +uint crc32_combine (uint crc1, uint crc2, z_off_t len2); + +/* + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + /* various hacks, don't look :) */ diff --git a/etc/c/zlib/ChangeLog b/etc/c/zlib/ChangeLog index 48e465f89..7f6869d32 100644 --- a/etc/c/zlib/ChangeLog +++ b/etc/c/zlib/ChangeLog @@ -1,6 +1,139 @@ ChangeLog file for zlib +Changes in 1.2.3 (18 July 2005) +- Apply security vulnerability fixes to contrib/infback9 as well +- Clean up some text files (carriage returns, trailing space) +- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] + +Changes in 1.2.2.4 (11 July 2005) +- Add inflatePrime() function for starting inflation at bit boundary +- Avoid some Visual C warnings in deflate.c +- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit + compile +- Fix some spelling errors in comments [Betts] +- Correct inflateInit2() error return documentation in zlib.h +- Added zran.c example of compressed data random access to examples + directory, shows use of inflatePrime() +- Fix cast for assignments to strm->state in inflate.c and infback.c +- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] +- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] +- Add cast in trees.c t avoid a warning [Oberhumer] +- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] +- Update make_vms.com [Zinser] +- Initialize state->write in inflateReset() since copied in inflate_fast() +- Be more strict on incomplete code sets in inflate_table() and increase + ENOUGH and MAXD -- this repairs a possible security vulnerability for + invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for + discovering the vulnerability and providing test cases. +- Add ia64 support to configure for HP-UX [Smith] +- Add error return to gzread() for format or i/o error [Levin] +- Use malloc.h for OS/2 [Necasek] + +Changes in 1.2.2.3 (27 May 2005) +- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile +- Typecast fread() return values in gzio.c [Vollant] +- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) +- Fix crc check bug in gzread() after gzungetc() [Heiner] +- Add the deflateTune() function to adjust internal compression parameters +- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) +- Remove an incorrect assertion in examples/zpipe.c +- Add C++ wrapper in infback9.h [Donais] +- Fix bug in inflateCopy() when decoding fixed codes +- Note in zlib.h how much deflateSetDictionary() actually uses +- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) +- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] +- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] +- Add gzdirect() function to indicate transparent reads +- Update contrib/minizip [Vollant] +- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] +- Add casts in crc32.c to avoid warnings [Oberhumer] +- Add contrib/masmx64 [Vollant] +- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] + +Changes in 1.2.2.2 (30 December 2004) +- Replace structure assignments in deflate.c and inflate.c with zmemcpy to + avoid implicit memcpy calls (portability for no-library compilation) +- Increase sprintf() buffer size in gzdopen() to allow for large numbers +- Add INFLATE_STRICT to check distances against zlib header +- Improve WinCE errno handling and comments [Chang] +- Remove comment about no gzip header processing in FAQ +- Add Z_FIXED strategy option to deflateInit2() to force fixed trees +- Add updated make_vms.com [Coghlan], update README +- Create a new "examples" directory, move gzappend.c there, add zpipe.c, + fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. +- Add FAQ entry and comments in deflate.c on uninitialized memory access +- Add Solaris 9 make options in configure [Gilbert] +- Allow strerror() usage in gzio.c for STDC +- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] +- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] +- Use z_off_t for adler32_combine() and crc32_combine() lengths +- Make adler32() much faster for small len +- Use OS_CODE in deflate() default gzip header + +Changes in 1.2.2.1 (31 October 2004) +- Allow inflateSetDictionary() call for raw inflate +- Fix inflate header crc check bug for file names and comments +- Add deflateSetHeader() and gz_header structure for custom gzip headers +- Add inflateGetheader() to retrieve gzip headers +- Add crc32_combine() and adler32_combine() functions +- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list +- Use zstreamp consistently in zlib.h (inflate_back functions) +- Remove GUNZIP condition from definition of inflate_mode in inflate.h + and in contrib/inflate86/inffast.S [Truta, Anderson] +- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] +- Update projects/README.projects and projects/visualc6 [Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] +- Deprecate Z_ASCII; use Z_TEXT instead [Truta] +- Use a new algorithm for setting strm->data_type in trees.c [Truta] +- Do not define an exit() prototype in zutil.c unless DEBUG defined +- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] +- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() +- Fix Darwin build version identification [Peterson] + +Changes in 1.2.2 (3 October 2004) +- Update zlib.h comments on gzip in-memory processing +- Set adler to 1 in inflateReset() to support Java test suite [Walles] +- Add contrib/dotzlib [Ravn] +- Update win32/DLL_FAQ.txt [Truta] +- Update contrib/minizip [Vollant] +- Move contrib/visual-basic.txt to old/ [Truta] +- Fix assembler builds in projects/visualc6/ [Truta] + +Changes in 1.2.1.2 (9 September 2004) +- Update INDEX file +- Fix trees.c to update strm->data_type (no one ever noticed!) +- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] +- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) +- Add limited multitasking protection to DYNAMIC_CRC_TABLE +- Add NO_vsnprintf for VMS in zutil.h [Mozilla] +- Don't declare strerror() under VMS [Mozilla] +- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize +- Update contrib/ada [Anisimkov] +- Update contrib/minizip [Vollant] +- Fix configure to not hardcode directories for Darwin [Peterson] +- Fix gzio.c to not return error on empty files [Brown] +- Fix indentation; update version in contrib/delphi/ZLib.pas and + contrib/pascal/zlibpas.pas [Truta] +- Update mkasm.bat in contrib/masmx86 [Truta] +- Update contrib/untgz [Truta] +- Add projects/README.projects [Truta] +- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] +- Remove an unnecessary assignment to curr in inftrees.c [Truta] +- Add OS/2 to exe builds in configure [Poltorak] +- Remove err dummy parameter in zlib.h [Kientzle] + +Changes in 1.2.1.1 (9 January 2004) +- Update email address in README +- Several FAQ updates +- Fix a big fat bug in inftrees.c that prevented decoding valid + dynamic blocks with only literals and no distance codes -- + Thanks to "Hot Emu" for the bug report and sample file +- Add a note to puff.c on no distance codes case. + Changes in 1.2.1 (17 November 2003) - Remove a tab in contrib/gzappend/gzappend.c - Update some interfaces in contrib for new zlib functions @@ -407,7 +540,7 @@ Changes in 1.0.7 (20 Jan 1998) Changes in 1.0.6 (19 Jan 1998) - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) -- Fix a deflate bug occuring only with compression level 0 (thanks to +- Fix a deflate bug occurring only with compression level 0 (thanks to Andy Buckler for finding this one). - In minigzip, pass transparently also the first byte for .Z files. - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() diff --git a/etc/c/zlib/FAQ b/etc/c/zlib/FAQ deleted file mode 100644 index 47a7d60c6..000000000 --- a/etc/c/zlib/FAQ +++ /dev/null @@ -1,100 +0,0 @@ - - Frequently Asked Questions about zlib - - -If your question is not there, please check the zlib home page -http://www.zlib.org which may have more recent information. -The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html - - - 1. Is zlib Y2K-compliant? - - Yes. zlib doesn't handle dates. - - 2. Where can I get a Windows DLL version? - - The zlib sources can be compiled without change to produce a DLL. If you - want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions - about the zlib DLL should be sent to Gilles Vollant (info@winimage.com). - - 3. Where can I get a Visual Basic interface to zlib? - - See - * http://www.winimage.com/zLibDll/cmp-z-it.zip - * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm - * contrib/visual-basic.txt in the zlib distribution - - 4. compress() returns Z_BUF_ERROR - - Make sure that before the call of compress, the length of the compressed - buffer is equal to the total size of the compressed buffer and not - zero. For Visual Basic, check that this parameter is passed by reference - ("as any"), not by value ("as long"). - - 5. deflate() or inflate() returns Z_BUF_ERROR - - Before making the call, make sure that avail_in and avail_out are not - zero. When setting the parameter flush equal to Z_FINISH, also make sure - that avail_out is big enough to allow processing all pending input. - - 6. Where's the zlib documentation (man pages, etc.)? - - It's in zlib.h for the moment, and Francis S. Lin has converted it to a - web page zlib.html. Volunteers to transform this to Unix-style man pages, - please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage - are in the files example.c and minigzip.c. - - 7. Why don't you use GNU autoconf or libtool or ...? - - Because we would like to keep zlib as a very small and simple - package. zlib is rather portable and doesn't need much configuration. - - 8. I found a bug in zlib. - - Most of the time, such problems are due to an incorrect usage of - zlib. Please try to reproduce the problem with a small program and send - the corresponding source to us at zlib@gzip.org . Do not send - multi-megabyte data files without prior agreement. - - 9. Why do I get "undefined reference to gzputc"? - - If "make test" produces something like - - example.o(.text+0x154): undefined reference to `gzputc' - - check that you don't have old files libz.* in /usr/lib, /usr/local/lib or - /usr/X11R6/lib. Remove any old versions, then do "make install". - -10. I need a Delphi interface to zlib. - - See the directories contrib/delphi and contrib/delphi2 in the zlib - distribution. - -11. Can zlib handle .zip archives? - - See the directory contrib/minizip in the zlib distribution. - -12. Can zlib handle .Z files? - - No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt - the code of uncompress on your own. - -13. How can I make a Unix shared library? - - make clean - ./configure -s - make - -14. Why does "make test" fail on Mac OS X? - - Mac OS X already includes zlib as a shared library, and so -lz links the - shared library instead of the one that the "make" compiled. For zlib - 1.1.3, the two are incompatible due to different compile-time - options. Simply change the -lz in the Makefile to libz.a, and it will use - the compiled library instead of the shared one and the "make test" will - succeed. - -15. I have a question about OttoPDF - - We are not the authors of OttoPDF. The real author is on the OttoPDF web - site Joel Hainley jhainley@myndkryme.com. diff --git a/etc/c/zlib/INDEX b/etc/c/zlib/INDEX deleted file mode 100644 index 8a2457664..000000000 --- a/etc/c/zlib/INDEX +++ /dev/null @@ -1,86 +0,0 @@ -ChangeLog history of changes -INDEX this file -FAQ Frequently Asked Questions about zlib -Make_vms.com script for Vax/VMS -Makefile makefile for Unix (generated by configure) -Makefile.in makefile for Unix (template for configure) -Makefile.riscos makefile for RISCOS -README guess what -algorithm.txt description of the (de)compression algorithm -configure configure script for Unix -descrip.mms makefile for Vax/VMS -zlib.3 mini man page for zlib (volunteers to write full - man pages from zlib.h welcome. write to jloup@gzip.org) - -amiga/Makefile.sas makefile for Amiga SAS/C -amiga/Makefile.pup makefile for Amiga powerUP SAS/C PPC - -msdos/Makefile.w32 makefile for Microsoft Visual C++ 32-bit -msdos/Makefile.b32 makefile for Borland C++ 32-bit -msdos/Makefile.bor makefile for Borland C/C++ 16-bit -msdos/Makefile.dj2 makefile for DJGPP 2.x -msdos/Makefile.emx makefile for EMX 0.9c (32-bit DOS/OS2) -msdos/Makefile.msc makefile for Microsoft C 16-bit -msdos/Makefile.tc makefile for Turbo C -msdos/Makefile.wat makefile for Watcom C -msdos/zlib.def definition file for Windows DLL -msdos/zlib.rc definition file for Windows DLL - -nt/Makefile.nt makefile for Windows NT -nt/zlib.dnt definition file for Windows NT DLL -nt/Makefile.emx makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel) -nt/Makefile.gcc makefile for Windows NT using GCC (mingw32) - - - zlib public header files (must be kept): -zconf.h -zlib.h - - private source files used to build the zlib library: -adler32.c -compress.c -crc32.c -deflate.c -deflate.h -gzio.c -infblock.c -infblock.h -infcodes.c -infcodes.h -inffast.c -inffast.h -inflate.c -inftrees.c -inftrees.h -infutil.c -infutil.h -maketree.c -trees.c -uncompr.c -zutil.c -zutil.h - - source files for sample programs: -example.c -minigzip.c - - unsupported contribution by third parties - -contrib/asm386/ by Gilles Vollant - 386 asm code replacing longest_match(). - -contrib/minizip/ by Gilles Vollant - Mini zip and unzip based on zlib - See http://www.winimage.com/zLibDll/unzip.html - -contrib/iostream/ by Kevin Ruland - A C++ I/O streams interface to the zlib gz* functions - -contrib/iostream2/ by Tyge Løvset - Another C++ I/O streams interface - -contrib/untgz/ by "Pedro A. Aranda Guti\irrez" - A very simple tar.gz extractor using zlib - -contrib/visual-basic.txt by Carlos Rios - How to use compress(), uncompress() and the gz* functions from VB. diff --git a/etc/c/zlib/README b/etc/c/zlib/README index d79986f7e..758cc5002 100644 --- a/etc/c/zlib/README +++ b/etc/c/zlib/README @@ -1,11 +1,6 @@ -================================================== -To build with Digital Mars C: - make -f win32.mak -================================================== - ZLIB DATA COMPRESSION LIBRARY -zlib 1.2.1 is a general purpose data compression library. All the code is +zlib 1.2.3 is a general purpose data compression library. All the code is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) @@ -21,9 +16,8 @@ minigzip.c. To compile all files and run the test program, follow the instructions given at the top of Makefile. In short "make test; make install" should work for most -machines. For Unix: "./configure; make test; make install" For MSDOS, use one -of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or -descrip.mms. +machines. For Unix: "./configure; make test; make install". For MSDOS, use one +of the special makefiles such as Makefile.msc. For VMS, use make_vms.com. Questions about zlib should be sent to , or to Gilles Vollant for the Windows DLL version. The zlib home page is @@ -39,7 +33,7 @@ Mark Nelson wrote an article about zlib for the Jan. 1997 issue of Dr. Dobb's Journal; a copy of the article is available in http://dogma.net/markn/articles/zlibtool/zlibtool.htm -The changes made in version 1.2.1 are documented in the file ChangeLog. +The changes made in version 1.2.3 are documented in the file ChangeLog. Unsupported third party contributions are provided in directory "contrib". @@ -51,7 +45,7 @@ A Perl interface to zlib written by Paul Marquess is in the CPAN (Comprehensive Perl Archive Network) sites http://www.cpan.org/modules/by-module/Compress/ -A Python interface to zlib written by A.M. Kuchling is +A Python interface to zlib written by A.M. Kuchling is available in Python 1.5 and later versions, see http://www.python.org/doc/lib/module-zlib.html @@ -98,7 +92,7 @@ Acknowledgments: Copyright notice: - (C) 1995-2003 Jean-loup Gailly and Mark Adler + (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages diff --git a/etc/c/zlib/adler32.c b/etc/c/zlib/adler32.c index 624a1696e..007ba2627 100644 --- a/etc/c/zlib/adler32.c +++ b/etc/c/zlib/adler32.c @@ -1,5 +1,5 @@ /* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -12,12 +12,13 @@ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ -#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} #define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); #define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); #define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); #define DO16(buf) DO8(buf,0); DO8(buf,8); +/* use NO_DIVIDE if your processor does not do division in hardware */ #ifdef NO_DIVIDE # define MOD(a) \ do { \ @@ -39,8 +40,17 @@ if (a >= (BASE << 1)) a -= (BASE << 1); \ if (a >= BASE) a -= BASE; \ } while (0) +# define MOD4(a) \ + do { \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) #else # define MOD(a) a %= BASE +# define MOD4(a) a %= BASE #endif /* ========================================================================= */ @@ -49,26 +59,91 @@ uLong ZEXPORT adler32(adler, buf, len) const Bytef *buf; uInt len; { - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; + unsigned long sum2; + unsigned n; - if (buf == Z_NULL) return 1L; + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; - while (len > 0) { - k = len < NMAX ? (int)len : NMAX; - len -= k; - while (k >= 16) { + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD4(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; DO16(buf); buf += 16; - k -= 16; } - if (k != 0) do { - s1 += *buf++; - s2 += s1; - } while (--k); - MOD(s1); - MOD(s2); + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); } - return (s2 << 16) | s1; + + /* return recombined sums */ + return adler | (sum2 << 16); +} + +/* ========================================================================= */ +uLong ZEXPORT adler32_combine(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off_t len2; +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* the derivation of this formula is left as an exercise for the reader */ + rem = (unsigned)(len2 % BASE); + sum1 = adler1 & 0xffff; + sum2 = rem * sum1; + MOD(sum2); + sum1 += (adler2 & 0xffff) + BASE - 1; + sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; + if (sum1 > BASE) sum1 -= BASE; + if (sum1 > BASE) sum1 -= BASE; + if (sum2 > (BASE << 1)) sum2 -= (BASE << 1); + if (sum2 > BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); } diff --git a/etc/c/zlib/compress.c b/etc/c/zlib/compress.c index 24ef02919..df04f0148 100644 --- a/etc/c/zlib/compress.c +++ b/etc/c/zlib/compress.c @@ -1,5 +1,5 @@ /* compress.c -- compress a memory buffer - * Copyright (C) 1995-2002 Jean-loup Gailly. + * Copyright (C) 1995-2003 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ diff --git a/etc/c/zlib/crc32.c b/etc/c/zlib/crc32.c index 689b2883b..f658a9ef5 100644 --- a/etc/c/zlib/crc32.c +++ b/etc/c/zlib/crc32.c @@ -1,16 +1,24 @@ /* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h * * Thanks to Rodney Brown for his contribution of faster * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing * tables for updating the shift register in one step with three exclusive-ors - * instead of four steps with four exclusive-ors. This results about a factor - * of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. + * instead of four steps with four exclusive-ors. This results in about a + * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. */ /* @(#) $Id$ */ +/* + Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore + protection on the static variables used to control the first-use generation + of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should + first call get_crc_table() to initialize the tables before allowing more than + one thread to use crc32(). + */ + #ifdef MAKECRCH # include # ifndef DYNAMIC_CRC_TABLE @@ -56,15 +64,19 @@ # define TBLS 1 #endif /* BYFOUR */ +/* Local functions for crc concatenation */ +local unsigned long gf2_matrix_times OF((unsigned long *mat, + unsigned long vec)); +local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); + #ifdef DYNAMIC_CRC_TABLE -local int crc_table_empty = 1; +local volatile int crc_table_empty = 1; local unsigned long FAR crc_table[TBLS][256]; local void make_crc_table OF((void)); #ifdef MAKECRCH local void write_table OF((FILE *, const unsigned long FAR *)); #endif /* MAKECRCH */ - /* Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. @@ -95,38 +107,51 @@ local void make_crc_table() { unsigned long c; int n, k; - unsigned long poly; /* polynomial exclusive-or pattern */ + unsigned long poly; /* polynomial exclusive-or pattern */ /* terms of polynomial defining this crc (except x^32): */ + static volatile int first = 1; /* flag to limit concurrent making */ static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0UL; - for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) - poly |= 1UL << (31 - p[n]); + /* See if another task is already doing this (not thread-safe, but better + than nothing -- significantly reduces duration of vulnerability in + case the advice about DYNAMIC_CRC_TABLE is ignored) */ + if (first) { + first = 0; - /* generate a crc for every 8-bit value */ - for (n = 0; n < 256; n++) { - c = (unsigned long)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[0][n] = c; - } + /* make exclusive-or pattern from polynomial (0xedb88320UL) */ + poly = 0UL; + for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) + poly |= 1UL << (31 - p[n]); + + /* generate a crc for every 8-bit value */ + for (n = 0; n < 256; n++) { + c = (unsigned long)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[0][n] = c; + } #ifdef BYFOUR - /* generate crc for each value followed by one, two, and three zeros, and - then the byte reversal of those as well as the first table */ - for (n = 0; n < 256; n++) { - c = crc_table[0][n]; - crc_table[4][n] = REV(c); - for (k = 1; k < 4; k++) { - c = crc_table[0][c & 0xff] ^ (c >> 8); - crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); + /* generate crc for each value followed by one, two, and three zeros, + and then the byte reversal of those as well as the first table */ + for (n = 0; n < 256; n++) { + c = crc_table[0][n]; + crc_table[4][n] = REV(c); + for (k = 1; k < 4; k++) { + c = crc_table[0][c & 0xff] ^ (c >> 8); + crc_table[k][n] = c; + crc_table[k + 4][n] = REV(c); + } } - } #endif /* BYFOUR */ - crc_table_empty = 0; + crc_table_empty = 0; + } + else { /* not first */ + /* wait for the other guy to finish (not efficient, but rare) */ + while (crc_table_empty) + ; + } #ifdef MAKECRCH /* write out CRC tables to crc32.h */ @@ -180,9 +205,10 @@ local void write_table(out, table) const unsigned long FAR * ZEXPORT get_crc_table() { #ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) make_crc_table(); + if (crc_table_empty) + make_crc_table(); #endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; + return (const unsigned long FAR *)crc_table; } /* ========================================================================= */ @@ -248,7 +274,7 @@ local unsigned long crc32_little(crc, buf, len) len--; } - buf4 = (const u4 FAR *)buf; + buf4 = (const u4 FAR *)(const void FAR *)buf; while (len >= 32) { DOLIT32; len -= 32; @@ -288,7 +314,7 @@ local unsigned long crc32_big(crc, buf, len) len--; } - buf4 = (const u4 FAR *)buf; + buf4 = (const u4 FAR *)(const void FAR *)buf; buf4--; while (len >= 32) { DOBIG32; @@ -309,3 +335,89 @@ local unsigned long crc32_big(crc, buf, len) } #endif /* BYFOUR */ + +#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ + +/* ========================================================================= */ +local unsigned long gf2_matrix_times(mat, vec) + unsigned long *mat; + unsigned long vec; +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +/* ========================================================================= */ +local void gf2_matrix_square(square, mat) + unsigned long *square; + unsigned long *mat; +{ + int n; + + for (n = 0; n < GF2_DIM; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +/* ========================================================================= */ +uLong ZEXPORT crc32_combine(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off_t len2; +{ + int n; + unsigned long row; + unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ + unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ + + /* degenerate case */ + if (len2 == 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320L; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < GF2_DIM; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} diff --git a/etc/c/zlib/deflate.c b/etc/c/zlib/deflate.c index 0525b2f33..29ce1f64a 100644 --- a/etc/c/zlib/deflate.c +++ b/etc/c/zlib/deflate.c @@ -1,5 +1,5 @@ /* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -52,7 +52,7 @@ #include "deflate.h" const char deflate_copyright[] = - " deflate 1.2.1 Copyright 1995-2003 Jean-loup Gailly "; + " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -264,7 +264,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, #endif if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_RLE) { + strategy < 0 || strategy > Z_FIXED) { return Z_STREAM_ERROR; } if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ @@ -274,6 +274,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, s->strm = strm; s->wrap = wrap; + s->gzhead = Z_NULL; s->w_bits = windowBits; s->w_size = 1 << s->w_bits; s->w_mask = s->w_size - 1; @@ -333,9 +334,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) if (length < MIN_MATCH) return Z_OK; if (length > MAX_DIST(s)) { length = MAX_DIST(s); -#ifndef USE_DICT_HEAD dictionary += dictLength - length; /* use the tail of the dictionary */ -#endif } zmemcpy(s->window, dictionary, length); s->strstart = length; @@ -390,6 +389,17 @@ int ZEXPORT deflateReset (strm) return Z_OK; } +/* ========================================================================= */ +int ZEXPORT deflateSetHeader (strm, head) + z_streamp strm; + gz_headerp head; +{ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + if (strm->state->wrap != 2) return Z_STREAM_ERROR; + strm->state->gzhead = head; + return Z_OK; +} + /* ========================================================================= */ int ZEXPORT deflatePrime (strm, bits, value) z_streamp strm; @@ -420,7 +430,7 @@ int ZEXPORT deflateParams(strm, level, strategy) #else if (level == Z_DEFAULT_COMPRESSION) level = 6; #endif - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_RLE) { + if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { return Z_STREAM_ERROR; } func = configuration_table[s->level].func; @@ -440,6 +450,25 @@ int ZEXPORT deflateParams(strm, level, strategy) return err; } +/* ========================================================================= */ +int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) + z_streamp strm; + int good_length; + int max_lazy; + int nice_length; + int max_chain; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + s->good_match = good_length; + s->max_lazy_match = max_lazy; + s->nice_match = nice_length; + s->max_chain_length = max_chain; + return Z_OK; +} + /* ========================================================================= * For the default windowBits of 15 and memLevel of 8, this function returns * a close to exact, as well as small, upper bound on the compressed size. @@ -548,20 +577,47 @@ int ZEXPORT deflate (strm, flush) if (s->status == INIT_STATE) { #ifdef GZIP if (s->wrap == 2) { + strm->adler = crc32(0L, Z_NULL, 0); put_byte(s, 31); put_byte(s, 139); put_byte(s, 8); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, 255); - s->status = BUSY_STATE; - strm->adler = crc32(0L, Z_NULL, 0); + if (s->gzhead == NULL) { + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, 0); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, OS_CODE); + s->status = BUSY_STATE; + } + else { + put_byte(s, (s->gzhead->text ? 1 : 0) + + (s->gzhead->hcrc ? 2 : 0) + + (s->gzhead->extra == Z_NULL ? 0 : 4) + + (s->gzhead->name == Z_NULL ? 0 : 8) + + (s->gzhead->comment == Z_NULL ? 0 : 16) + ); + put_byte(s, (Byte)(s->gzhead->time & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); + put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); + put_byte(s, s->level == 9 ? 2 : + (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? + 4 : 0)); + put_byte(s, s->gzhead->os & 0xff); + if (s->gzhead->extra != NULL) { + put_byte(s, s->gzhead->extra_len & 0xff); + put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); + } + if (s->gzhead->hcrc) + strm->adler = crc32(strm->adler, s->pending_buf, + s->pending); + s->gzindex = 0; + s->status = EXTRA_STATE; + } } else #endif @@ -592,6 +648,110 @@ int ZEXPORT deflate (strm, flush) strm->adler = adler32(0L, Z_NULL, 0); } } +#ifdef GZIP + if (s->status == EXTRA_STATE) { + if (s->gzhead->extra != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + + while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) + break; + } + put_byte(s, s->gzhead->extra[s->gzindex]); + s->gzindex++; + } + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (s->gzindex == s->gzhead->extra_len) { + s->gzindex = 0; + s->status = NAME_STATE; + } + } + else + s->status = NAME_STATE; + } + if (s->status == NAME_STATE) { + if (s->gzhead->name != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->name[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) { + s->gzindex = 0; + s->status = COMMENT_STATE; + } + } + else + s->status = COMMENT_STATE; + } + if (s->status == COMMENT_STATE) { + if (s->gzhead->comment != NULL) { + uInt beg = s->pending; /* start of bytes to update crc */ + int val; + + do { + if (s->pending == s->pending_buf_size) { + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + flush_pending(strm); + beg = s->pending; + if (s->pending == s->pending_buf_size) { + val = 1; + break; + } + } + val = s->gzhead->comment[s->gzindex++]; + put_byte(s, val); + } while (val != 0); + if (s->gzhead->hcrc && s->pending > beg) + strm->adler = crc32(strm->adler, s->pending_buf + beg, + s->pending - beg); + if (val == 0) + s->status = HCRC_STATE; + } + else + s->status = HCRC_STATE; + } + if (s->status == HCRC_STATE) { + if (s->gzhead->hcrc) { + if (s->pending + 2 > s->pending_buf_size) + flush_pending(strm); + if (s->pending + 2 <= s->pending_buf_size) { + put_byte(s, (Byte)(strm->adler & 0xff)); + put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); + strm->adler = crc32(0L, Z_NULL, 0); + s->status = BUSY_STATE; + } + } + else + s->status = BUSY_STATE; + } +#endif /* Flush as much pending output as possible */ if (s->pending != 0) { @@ -704,7 +864,12 @@ int ZEXPORT deflateEnd (strm) if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; status = strm->state->status; - if (status != INIT_STATE && status != BUSY_STATE && + if (status != INIT_STATE && + status != EXTRA_STATE && + status != NAME_STATE && + status != COMMENT_STATE && + status != HCRC_STATE && + status != BUSY_STATE && status != FINISH_STATE) { return Z_STREAM_ERROR; } @@ -744,12 +909,12 @@ int ZEXPORT deflateCopy (dest, source) ss = source->state; - *dest = *source; + zmemcpy(dest, source, sizeof(z_stream)); ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); if (ds == Z_NULL) return Z_MEM_ERROR; dest->state = (struct internal_state FAR *) ds; - *ds = *ss; + zmemcpy(ds, ss, sizeof(deflate_state)); ds->strm = dest; ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); @@ -838,9 +1003,11 @@ local void lm_init (s) s->match_length = s->prev_length = MIN_MATCH-1; s->match_available = 0; s->ins_h = 0; +#ifndef FASTEST #ifdef ASMV match_init(); /* initialize the asm code */ #endif +#endif } #ifndef FASTEST @@ -909,7 +1076,12 @@ local uInt longest_match(s, cur_match) match = s->window + cur_match; /* Skip to next match if the match length cannot increase - * or if the match length is less than 2: + * or if the match length is less than 2. Note that the checks below + * for insufficient lookahead only occur occasionally for performance + * reasons. Therefore uninitialized memory will be accessed, and + * conditional jumps will be made that depend on those values. + * However the length of the match is limited to the lookahead, so + * the output of deflate is not affected by the uninitialized values. */ #if (defined(UNALIGNED_OK) && MAX_MATCH == 258) /* This code assumes sizeof(unsigned short) == 2. Do not use @@ -1131,6 +1303,7 @@ local void fill_window(s) later. (Using level 0 permanently is not an optimal usage of zlib, so we don't care about this pathological case.) */ + /* %%% avoid this when Z_RLE */ n = s->hash_size; p = &s->head[n]; do { @@ -1309,12 +1482,12 @@ local block_state deflate_fast(s, flush) * of the string with itself at the start of the input file). */ #ifdef FASTEST - if ((s->strategy < Z_HUFFMAN_ONLY) || + if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { s->match_length = longest_match_fast (s, hash_head); } #else - if (s->strategy < Z_HUFFMAN_ONLY) { + if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { s->match_length = longest_match (s, hash_head); } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { s->match_length = longest_match_fast (s, hash_head); @@ -1418,7 +1591,7 @@ local block_state deflate_slow(s, flush) * of window index 0 (in particular we have to avoid a match * of the string with itself at the start of the input file). */ - if (s->strategy < Z_HUFFMAN_ONLY) { + if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { s->match_length = longest_match (s, hash_head); } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { s->match_length = longest_match_fast (s, hash_head); @@ -1500,3 +1673,64 @@ local block_state deflate_slow(s, flush) return flush == Z_FINISH ? finish_done : block_done; } #endif /* FASTEST */ + +#if 0 +/* =========================================================================== + * For Z_RLE, simply look for runs of bytes, generate matches only of distance + * one. Do not maintain a hash table. (It will be regenerated if this run of + * deflate switches away from Z_RLE.) + */ +local block_state deflate_rle(s, flush) + deflate_state *s; + int flush; +{ + int bflush; /* set if current block must be flushed */ + uInt run; /* length of run */ + uInt max; /* maximum length of run */ + uInt prev; /* byte at distance one to match */ + Bytef *scan; /* scan for end of run */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the longest encodable run. + */ + if (s->lookahead < MAX_MATCH) { + fill_window(s); + if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* See how many times the previous byte repeats */ + run = 0; + if (s->strstart > 0) { /* if there is a previous byte, that is */ + max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; + scan = s->window + s->strstart - 1; + prev = *scan++; + do { + if (*scan++ != prev) + break; + } while (++run < max); + } + + /* Emit match if have run of MIN_MATCH or longer, else emit literal */ + if (run >= MIN_MATCH) { + check_match(s, s->strstart, s->strstart - 1, run); + _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); + s->lookahead -= run; + s->strstart += run; + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} +#endif diff --git a/etc/c/zlib/deflate.h b/etc/c/zlib/deflate.h index e31f66be5..05a5ab3a2 100644 --- a/etc/c/zlib/deflate.h +++ b/etc/c/zlib/deflate.h @@ -1,5 +1,5 @@ /* deflate.h -- internal compression state - * Copyright (C) 1995-2002 Jean-loup Gailly + * Copyright (C) 1995-2004 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -49,6 +49,10 @@ /* All codes must not exceed MAX_BITS bits */ #define INIT_STATE 42 +#define EXTRA_STATE 69 +#define NAME_STATE 73 +#define COMMENT_STATE 91 +#define HCRC_STATE 103 #define BUSY_STATE 113 #define FINISH_STATE 666 /* Stream status */ @@ -93,9 +97,10 @@ typedef struct internal_state { Bytef *pending_buf; /* output still pending */ ulg pending_buf_size; /* size of pending_buf */ Bytef *pending_out; /* next pending byte to output to the stream */ - int pending; /* nb of bytes in the pending buffer */ + uInt pending; /* nb of bytes in the pending buffer */ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - Byte data_type; /* UNKNOWN, BINARY or ASCII */ + gz_headerp gzhead; /* gzip header information to write */ + uInt gzindex; /* where in extra, name, or comment */ Byte method; /* STORED (for zip only) or DEFLATED */ int last_flush; /* value of flush param for previous deflate call */ diff --git a/etc/c/zlib/example.c b/etc/c/zlib/example.c index c2361f98f..6c8a0ee76 100644 --- a/etc/c/zlib/example.c +++ b/etc/c/zlib/example.c @@ -1,5 +1,5 @@ /* example.c -- usage example of the zlib compression library - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2004 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -11,8 +11,6 @@ #ifdef STDC # include # include -#else - extern void exit OF((int)); #endif #if defined(VMS) || defined(RISCOS) diff --git a/etc/c/zlib/gzio.c b/etc/c/zlib/gzio.c index 4afd102b3..7e90f4928 100644 --- a/etc/c/zlib/gzio.c +++ b/etc/c/zlib/gzio.c @@ -1,5 +1,5 @@ /* gzio.c -- IO on .gz files - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h * * Compile this file with -DNO_GZCOMPRESS to avoid the compression code. @@ -11,7 +11,7 @@ #include "zutil.h" -#ifdef NO_DEFLATE /* for compatiblity with old definition */ +#ifdef NO_DEFLATE /* for compatibility with old definition */ # define NO_GZCOMPRESS #endif @@ -220,7 +220,7 @@ gzFile ZEXPORT gzdopen (fd, mode) int fd; const char *mode; { - char name[20]; + char name[46]; /* allow for up to 128-bit integers */ if (fd < 0) return (gzFile)Z_NULL; sprintf(name, "", fd); /* for debugging */ @@ -264,7 +264,7 @@ local int get_byte(s) if (s->z_eof) return EOF; if (s->stream.avail_in == 0) { errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); if (s->stream.avail_in == 0) { s->z_eof = 1; if (ferror(s->file)) s->z_err = Z_ERRNO; @@ -300,7 +300,7 @@ local void check_header(s) if (len < 2) { if (len) s->inbuf[0] = s->stream.next_in[0]; errno = 0; - len = fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file); + len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file); if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO; s->stream.avail_in += len; s->stream.next_in = s->inbuf; @@ -415,6 +415,7 @@ int ZEXPORT gzread (file, buf, len) s->stream.avail_out--; s->back = EOF; s->out++; + start++; if (s->last) { s->z_err = Z_STREAM_END; return 1; @@ -436,8 +437,8 @@ int ZEXPORT gzread (file, buf, len) s->stream.avail_in -= n; } if (s->stream.avail_out > 0) { - s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out, - s->file); + s->stream.avail_out -= + (uInt)fread(next_out, 1, s->stream.avail_out, s->file); } len -= s->stream.avail_out; s->in += len; @@ -448,7 +449,7 @@ int ZEXPORT gzread (file, buf, len) if (s->stream.avail_in == 0 && !s->z_eof) { errno = 0; - s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); + s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); if (s->stream.avail_in == 0) { s->z_eof = 1; if (ferror(s->file)) { @@ -488,6 +489,9 @@ int ZEXPORT gzread (file, buf, len) } s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + if (len == s->stream.avail_out && + (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO)) + return -1; return (int)(len - s->stream.avail_out); } @@ -898,6 +902,18 @@ int ZEXPORT gzeof (file) return s->z_err == Z_STREAM_END; } +/* =========================================================================== + Returns 1 if reading and doing so transparently, otherwise zero. +*/ +int ZEXPORT gzdirect (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return 0; + return s->transparent; +} + /* =========================================================================== Outputs a long in LSB order to the given file */ @@ -937,7 +953,6 @@ local uLong getLong (s) int ZEXPORT gzclose (file) gzFile file; { - int err; gz_stream *s = (gz_stream*)file; if (s == NULL) return Z_STREAM_ERROR; @@ -946,8 +961,8 @@ int ZEXPORT gzclose (file) #ifdef NO_GZCOMPRESS return Z_STREAM_ERROR; #else - err = do_flush (file, Z_FINISH); - if (err != Z_OK) return destroy((gz_stream*)file); + if (do_flush (file, Z_FINISH) != Z_OK) + return destroy((gz_stream*)file); putLong (s->file, s->crc); putLong (s->file, (uLong)(s->in & 0xffffffff)); @@ -956,10 +971,16 @@ int ZEXPORT gzclose (file) return destroy((gz_stream*)file); } +#ifdef STDC +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + /* =========================================================================== - Returns the error message for the last error which occured on the + Returns the error message for the last error which occurred on the given compressed file. errnum is set to zlib error number. If an - error occured in the file system and not in the compression library, + error occurred in the file system and not in the compression library, errnum is set to Z_ERRNO and the application may consult errno to get the exact error code. */ diff --git a/etc/c/zlib/infback.c b/etc/c/zlib/infback.c index 110b03b85..455dbc9ee 100644 --- a/etc/c/zlib/infback.c +++ b/etc/c/zlib/infback.c @@ -1,5 +1,5 @@ /* infback.c -- inflate using a call-back interface - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -26,7 +26,7 @@ local void fixedtables OF((struct inflate_state FAR *state)); window and output buffer that is 2**windowBits bytes. */ int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) -z_stream FAR *strm; +z_streamp strm; int windowBits; unsigned char FAR *window; const char *version; @@ -50,7 +50,8 @@ int stream_size; sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; Tracev((stderr, "inflate: allocated\n")); - strm->state = (voidpf)state; + strm->state = (struct internal_state FAR *)state; + state->dmax = 32768U; state->wbits = windowBits; state->wsize = 1U << windowBits; state->window = window; @@ -238,7 +239,7 @@ struct inflate_state FAR *state; are not correct, i.e. strm is Z_NULL or the state was not initialized. */ int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) -z_stream FAR *strm; +z_streamp strm; in_func in; void FAR *in_desc; out_func out; @@ -434,6 +435,9 @@ void FAR *out_desc; } } + /* handle error breaks in while */ + if (state->mode == BAD) break; + /* build code tables */ state->next = state->codes; state->lencode = (code const FAR *)(state->next); @@ -608,7 +612,7 @@ void FAR *out_desc; } int ZEXPORT inflateBackEnd(strm) -z_stream FAR *strm; +z_streamp strm; { if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) return Z_STREAM_ERROR; diff --git a/etc/c/zlib/infblock.c b/etc/c/zlib/infblock.c deleted file mode 100644 index dd7a6d40a..000000000 --- a/etc/c/zlib/infblock.c +++ /dev/null @@ -1,403 +0,0 @@ -/* infblock.c -- interpret and process block types to last block - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "infblock.h" -#include "inftrees.h" -#include "infcodes.h" -#include "infutil.h" - -struct inflate_codes_state {int dummy;}; /* for buggy compilers */ - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -/* Table for deflate from PKZIP's appnote.txt. */ -local const uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ - - -void inflate_blocks_reset(s, z, c) -inflate_blocks_statef *s; -z_streamp z; -uLongf *c; -{ - if (c != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens); - if (s->mode == CODES) - inflate_codes_free(s->sub.decode.codes, z); - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0); - Tracev((stderr, "inflate: blocks reset\n")); -} - - -inflate_blocks_statef *inflate_blocks_new(z, c, w) -z_streamp z; -check_func c; -uInt w; -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->hufts = - (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) - { - ZFREE(z, s); - return Z_NULL; - } - if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s->hufts); - ZFREE(z, s); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Tracev((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, Z_NULL); - return s; -} - - -int inflate_blocks(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Tracev((stderr, "inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Tracev((stderr, "inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td, z); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BAD; - z->msg = (char*)"invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) - { - s->mode = BAD; - z->msg = (char*)"invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev((stderr, "inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BAD; - z->msg = (char*)"too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev((stderr, "inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, s->hufts, z); - if (t != Z_OK) - { - r = t; - if (r == Z_DATA_ERROR) - { - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - } - LEAVE - } - s->sub.trees.index = 0; - Tracev((stderr, "inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->bits; - c = h->base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - z->msg = (char*)"invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, - s->hufts, z); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - { - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - } - r = t; - LEAVE - } - Tracev((stderr, "inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.codes = c; - } - ZFREE(z, s->sub.trees.blens); - s->mode = CODES; - case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - LOAD - Tracev((stderr, "inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONE; - case DONE: - r = Z_STREAM_END; - LEAVE - case BAD: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -int inflate_blocks_free(s, z) -inflate_blocks_statef *s; -z_streamp z; -{ - inflate_blocks_reset(s, z, Z_NULL); - ZFREE(z, s->window); - ZFREE(z, s->hufts); - ZFREE(z, s); - Tracev((stderr, "inflate: blocks freed\n")); - return Z_OK; -} - - -void inflate_set_dictionary(s, d, n) -inflate_blocks_statef *s; -const Bytef *d; -uInt n; -{ - zmemcpy(s->window, d, n); - s->read = s->write = s->window + n; -} - - -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. - * IN assertion: s != Z_NULL - */ -int inflate_blocks_sync_point(s) -inflate_blocks_statef *s; -{ - return s->mode == LENS; -} diff --git a/etc/c/zlib/infblock.h b/etc/c/zlib/infblock.h deleted file mode 100644 index 173b2267a..000000000 --- a/etc/c/zlib/infblock.h +++ /dev/null @@ -1,39 +0,0 @@ -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_blocks_state; -typedef struct inflate_blocks_state FAR inflate_blocks_statef; - -extern inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -extern int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ - -extern void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLongf *)); /* check value on output */ - -extern int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp)); - -extern void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Bytef *d, /* dictionary */ - uInt n)); /* dictionary length */ - -extern int inflate_blocks_sync_point OF(( - inflate_blocks_statef *s)); diff --git a/etc/c/zlib/infcodes.c b/etc/c/zlib/infcodes.c deleted file mode 100644 index 9abe5412b..000000000 --- a/etc/c/zlib/infcodes.c +++ /dev/null @@ -1,251 +0,0 @@ -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" -#include "infblock.h" -#include "infcodes.h" -#include "infutil.h" -#include "inffast.h" - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ -inflate_codes_mode; - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - inflate_codes_mode mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ - -}; - - -inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) -uInt bl, bd; -inflate_huft *tl; -inflate_huft *td; /* need separate declaration for Borland C++ */ -z_streamp z; -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev((stderr, "inflate: codes new\n")); - } - return c; -} - - -int inflate_codes(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Bytef *p; /* input data pointer */ - uInt n; /* bytes available there */ - Bytef *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Bytef *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - if (e & 32) /* end of block */ - { - Tracevv((stderr, "inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv((stderr, "inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ - f = q - c->sub.copy.dist; - while (f < s->window) /* modulo window size-"while" instead */ - f += s->end - s->window; /* of "if" handles invalid distances */ - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -#ifdef NEED_DUMMY_RETURN - return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ -#endif -} - - -void inflate_codes_free(c, z) -inflate_codes_statef *c; -z_streamp z; -{ - ZFREE(z, c); - Tracev((stderr, "inflate: codes free\n")); -} diff --git a/etc/c/zlib/infcodes.h b/etc/c/zlib/infcodes.h deleted file mode 100644 index 46821a02b..000000000 --- a/etc/c/zlib/infcodes.h +++ /dev/null @@ -1,27 +0,0 @@ -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_codes_state; -typedef struct inflate_codes_state FAR inflate_codes_statef; - -extern inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_streamp )); - -extern int inflate_codes OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -extern void inflate_codes_free OF(( - inflate_codes_statef *, - z_streamp )); - diff --git a/etc/c/zlib/inffast.c b/etc/c/zlib/inffast.c index c716440a9..bbee92ed1 100644 --- a/etc/c/zlib/inffast.c +++ b/etc/c/zlib/inffast.c @@ -1,5 +1,5 @@ /* inffast.c -- fast decoding - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -19,7 +19,7 @@ - none No measurable difference: - Pentium III (Anderson) - - 68060 (Nikl) + - M68060 (Nikl) */ #ifdef POSTINC # define OFF 0 @@ -74,6 +74,9 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ unsigned char FAR *out; /* local strm->next_out */ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif unsigned wsize; /* window size or zero if not using window */ unsigned whave; /* valid bytes in the window */ unsigned write; /* window write index */ @@ -98,6 +101,9 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ out = strm->next_out - OFF; beg = out - (start - strm->avail_out); end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif wsize = state->wsize; whave = state->whave; write = state->write; @@ -167,6 +173,13 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ } } dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif hold >>= op; bits -= op; Tracevv((stderr, "inflate: distance %u\n", dist)); diff --git a/etc/c/zlib/inflate.c b/etc/c/zlib/inflate.c index a53b5c744..792fdee8e 100644 --- a/etc/c/zlib/inflate.c +++ b/etc/c/zlib/inflate.c @@ -1,5 +1,5 @@ /* inflate.c -- zlib decompression - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -109,11 +109,15 @@ z_streamp strm; state = (struct inflate_state FAR *)strm->state; strm->total_in = strm->total_out = state->total = 0; strm->msg = Z_NULL; + strm->adler = 1; /* to support ill-conceived Java test suite */ state->mode = HEAD; state->last = 0; state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; state->wsize = 0; state->whave = 0; + state->write = 0; state->hold = 0; state->bits = 0; state->lencode = state->distcode = state->next = state->codes; @@ -121,6 +125,22 @@ z_streamp strm; return Z_OK; } +int ZEXPORT inflatePrime(strm, bits, value) +z_streamp strm; +int bits; +int value; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; + value &= (1L << bits) - 1; + state->hold += value << state->bits; + state->bits += bits; + return Z_OK; +} + int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) z_streamp strm; int windowBits; @@ -143,7 +163,7 @@ int stream_size; ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; Tracev((stderr, "inflate: allocated\n")); - strm->state = (voidpf)state; + strm->state = (struct internal_state FAR *)state; if (windowBits < 0) { state->wrap = 0; windowBits = -windowBits; @@ -581,6 +601,8 @@ int flush; break; } state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; if (!(state->wrap & 1) || /* check if zlib header allowed */ #else if ( @@ -596,11 +618,13 @@ int flush; break; } DROPBITS(4); - if (BITS(4) + 8 > state->wbits) { + len = BITS(4) + 8; + if (len > state->wbits) { strm->msg = (char *)"invalid window size"; state->mode = BAD; break; } + state->dmax = 1U << len; Tracev((stderr, "inflate: zlib header ok\n")); strm->adler = state->check = adler32(0L, Z_NULL, 0); state->mode = hold & 0x200 ? DICTID : TYPE; @@ -620,16 +644,24 @@ int flush; state->mode = BAD; break; } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); if (state->flags & 0x0200) CRC2(state->check, hold); INITBITS(); state->mode = TIME; case TIME: NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; if (state->flags & 0x0200) CRC4(state->check, hold); INITBITS(); state->mode = OS; case OS: NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } if (state->flags & 0x0200) CRC2(state->check, hold); INITBITS(); state->mode = EXLEN; @@ -637,15 +669,26 @@ int flush; if (state->flags & 0x0400) { NEEDBITS(16); state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; if (state->flags & 0x0200) CRC2(state->check, hold); INITBITS(); } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; state->mode = EXTRA; case EXTRA: if (state->flags & 0x0400) { copy = state->length; if (copy > have) copy = have; if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } if (state->flags & 0x0200) state->check = crc32(state->check, next, copy); have -= copy; @@ -654,6 +697,7 @@ int flush; } if (state->length) goto inf_leave; } + state->length = 0; state->mode = NAME; case NAME: if (state->flags & 0x0800) { @@ -661,13 +705,20 @@ int flush; copy = 0; do { len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; } while (len && copy < have); - if (state->flags & 0x02000) + if (state->flags & 0x0200) state->check = crc32(state->check, next, copy); have -= copy; next += copy; if (len) goto inf_leave; } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; state->mode = COMMENT; case COMMENT: if (state->flags & 0x1000) { @@ -675,13 +726,19 @@ int flush; copy = 0; do { len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; } while (len && copy < have); - if (state->flags & 0x02000) + if (state->flags & 0x0200) state->check = crc32(state->check, next, copy); have -= copy; next += copy; if (len) goto inf_leave; } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; state->mode = HCRC; case HCRC: if (state->flags & 0x0200) { @@ -693,6 +750,10 @@ int flush; } INITBITS(); } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } strm->adler = state->check = crc32(0L, Z_NULL, 0); state->mode = TYPE; break; @@ -861,6 +922,9 @@ int flush; } } + /* handle error breaks in while */ + if (state->mode == BAD) break; + /* build code tables */ state->next = state->codes; state->lencode = (code const FAR *)(state->next); @@ -965,6 +1029,13 @@ int flush; state->offset += BITS(state->extra); DROPBITS(state->extra); } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif if (state->offset > state->whave + out - left) { strm->msg = (char *)"invalid distance too far back"; state->mode = BAD; @@ -1106,12 +1177,16 @@ uInt dictLength; /* check state */ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; state = (struct inflate_state FAR *)strm->state; - if (state->mode != DICT) return Z_STREAM_ERROR; + if (state->wrap != 0 && state->mode != DICT) + return Z_STREAM_ERROR; /* check for correct dictionary id */ - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) return Z_DATA_ERROR; + if (state->mode == DICT) { + id = adler32(0L, Z_NULL, 0); + id = adler32(id, dictionary, dictLength); + if (id != state->check) + return Z_DATA_ERROR; + } /* copy dictionary to window */ if (updatewindow(strm, strm->avail_out)) { @@ -1133,6 +1208,23 @@ uInt dictLength; return Z_OK; } +int ZEXPORT inflateGetHeader(strm, head) +z_streamp strm; +gz_headerp head; +{ + struct inflate_state FAR *state; + + /* check state */ + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; + + /* save header structure */ + state->head = head; + head->done = 0; + return Z_OK; +} + /* Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found or when out of input. When called, *have is the number of pattern bytes @@ -1235,6 +1327,7 @@ z_streamp source; struct inflate_state FAR *state; struct inflate_state FAR *copy; unsigned char FAR *window; + unsigned wsize; /* check input */ if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || @@ -1257,14 +1350,19 @@ z_streamp source; } /* copy state */ - *dest = *source; - *copy = *state; - copy->lencode = copy->codes + (state->lencode - state->codes); - copy->distcode = copy->codes + (state->distcode - state->codes); + zmemcpy(dest, source, sizeof(z_stream)); + zmemcpy(copy, state, sizeof(struct inflate_state)); + if (state->lencode >= state->codes && + state->lencode <= state->codes + ENOUGH - 1) { + copy->lencode = copy->codes + (state->lencode - state->codes); + copy->distcode = copy->codes + (state->distcode - state->codes); + } copy->next = copy->codes + (state->next - state->codes); - if (window != Z_NULL) - zmemcpy(window, state->window, 1U << state->wbits); + if (window != Z_NULL) { + wsize = 1U << state->wbits; + zmemcpy(window, state->window, wsize); + } copy->window = window; - dest->state = (voidpf)copy; + dest->state = (struct internal_state FAR *)copy; return Z_OK; } diff --git a/etc/c/zlib/inflate.h b/etc/c/zlib/inflate.h index 9a12c8fd2..07bd3e78a 100644 --- a/etc/c/zlib/inflate.h +++ b/etc/c/zlib/inflate.h @@ -1,5 +1,5 @@ /* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2004 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -19,7 +19,6 @@ /* Possible inflate modes between inflate() calls */ typedef enum { HEAD, /* i: waiting for magic header */ -#ifdef GUNZIP FLAGS, /* i: waiting for method and flags (gzip) */ TIME, /* i: waiting for modification time (gzip) */ OS, /* i: waiting for extra flags and operating system (gzip) */ @@ -28,7 +27,6 @@ typedef enum { NAME, /* i: waiting for end of file name (gzip) */ COMMENT, /* i: waiting for end of comment (gzip) */ HCRC, /* i: waiting for header crc (gzip) */ -#endif DICTID, /* i: waiting for dictionary check value */ DICT, /* waiting for inflateSetDictionary() call */ TYPE, /* i: waiting for type bits, including last-flag bit */ @@ -45,9 +43,7 @@ typedef enum { MATCH, /* o: waiting for output space to copy string */ LIT, /* o: waiting for output space to write literal */ CHECK, /* i: waiting for 32-bit check value */ -#ifdef GUNZIP LENGTH, /* i: waiting for 32-bit length (gzip) */ -#endif DONE, /* finished check, done -- remain here until reset */ BAD, /* got a data error -- remain here until reset */ MEM, /* got an inflate() memory error -- remain here until reset */ @@ -84,8 +80,10 @@ struct inflate_state { int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ int havedict; /* true if dictionary provided */ int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ unsigned long check; /* protected copy of check value */ unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ /* sliding window */ unsigned wbits; /* log base 2 of requested window size */ unsigned wsize; /* window size or zero if not using window */ diff --git a/etc/c/zlib/inftrees.c b/etc/c/zlib/inftrees.c index 628cdbcde..8a9c13ff0 100644 --- a/etc/c/zlib/inftrees.c +++ b/etc/c/zlib/inftrees.c @@ -1,5 +1,5 @@ /* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -9,7 +9,7 @@ #define MAXBITS 15 const char inflate_copyright[] = - " inflate 1.2.1 Copyright 1995-2003 Mark Adler "; + " inflate 1.2.3 Copyright 1995-2005 Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -62,7 +62,7 @@ unsigned short FAR *work; 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; static const unsigned short lext[31] = { /* Length codes 257..285 extra */ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 76, 66}; + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, @@ -114,7 +114,15 @@ unsigned short FAR *work; for (max = MAXBITS; max >= 1; max--) if (count[max] != 0) break; if (root > max) root = max; - if (max == 0) return -1; /* no codes! */ + if (max == 0) { /* no symbols to code at all */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)1; + this.val = (unsigned short)0; + *(*table)++ = this; /* make a table to force an error */ + *(*table)++ = this; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } for (min = 1; min <= MAXBITS; min++) if (count[min] != 0) break; if (root < min) root = min; @@ -127,7 +135,6 @@ unsigned short FAR *work; if (left < 0) return -1; /* over-subscribed */ } if (left > 0 && (type == CODES || max != 1)) - //if (left > 0 && (type == CODES || (codes - count[0] != 1))) return -1; /* incomplete set */ /* generate offsets into symbol table for each length for sorting */ @@ -225,6 +232,7 @@ unsigned short FAR *work; /* replicate for those indices with low len bits equal to huff */ incr = 1U << (len - drop); fill = 1U << curr; + min = fill; /* save offset to next table */ do { fill -= incr; next[(huff >> drop) + fill] = this; @@ -255,7 +263,7 @@ unsigned short FAR *work; drop = root; /* increment past last table */ - next += 1U << curr; + next += min; /* here min is 1 << curr */ /* determine length of next table */ curr = len - drop; @@ -296,7 +304,6 @@ unsigned short FAR *work; drop = 0; len = root; next = *table; - curr = root; this.bits = (unsigned char)len; } diff --git a/etc/c/zlib/inftrees.h b/etc/c/zlib/inftrees.h index 82d365a7e..b1104c87e 100644 --- a/etc/c/zlib/inftrees.h +++ b/etc/c/zlib/inftrees.h @@ -1,5 +1,5 @@ /* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2003 Mark Adler + * Copyright (C) 1995-2005 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -36,12 +36,12 @@ typedef struct { */ /* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1004 code structures (850 for length/literals - and 154 for distances, the latter actually the result of an + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an exhaustive search). The true maximum is not known, but the value below is more than safe. */ -#define ENOUGH 1440 -#define MAXD 154 +#define ENOUGH 2048 +#define MAXD 592 /* Type of code to build for inftable() */ typedef enum { diff --git a/etc/c/zlib/infutil.c b/etc/c/zlib/infutil.c deleted file mode 100644 index 9a076221f..000000000 --- a/etc/c/zlib/infutil.c +++ /dev/null @@ -1,87 +0,0 @@ -/* inflate_util.c -- data and routines common to blocks and codes - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "infblock.h" -#include "inftrees.h" -#include "infcodes.h" -#include "infutil.h" - -struct inflate_codes_state {int dummy;}; /* for buggy compilers */ - -/* And'ing with mask[n] masks the lower n bits */ -uInt inflate_mask[17] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - - -/* copy as much as possible from the sliding window to the output area */ -int inflate_flush(s, z, r) -inflate_blocks_statef *s; -z_streamp z; -int r; -{ - uInt n; - Bytef *p; - Bytef *q; - - /* local copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as far as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy as far as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} diff --git a/etc/c/zlib/infutil.h b/etc/c/zlib/infutil.h deleted file mode 100644 index 4401df82f..000000000 --- a/etc/c/zlib/infutil.h +++ /dev/null @@ -1,98 +0,0 @@ -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#ifndef _INFUTIL_H -#define _INFUTIL_H - -typedef enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONE, /* finished last block, done */ - BAD} /* got a data error--stuck here */ -inflate_block_mode; - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - inflate_block_mode mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uIntf *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - inflate_huft *hufts; /* single malloc for tree space */ - Bytef *window; /* sliding window */ - Bytef *end; /* one byte after sliding window */ - Bytef *read; /* window read pointer */ - Bytef *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (uInt)(qread?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load local pointers */ -#define LOAD {LOADIN LOADOUT} - -/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ -extern uInt inflate_mask[17]; - -/* copy as much as possible from the sliding window to the output area */ -extern int inflate_flush OF(( - inflate_blocks_statef *, - z_streamp , - int)); - -struct internal_state {int dummy;}; /* for buggy compilers */ - -#endif diff --git a/etc/c/zlib/linux.mak b/etc/c/zlib/linux.mak index d8885807f..f1398505f 100644 --- a/etc/c/zlib/linux.mak +++ b/etc/c/zlib/linux.mak @@ -2,7 +2,7 @@ CC=gcc LD=link -CFLAGS=-O +CFLAGS=-O -m32 LDFLAGS= O=.o @@ -74,4 +74,4 @@ test: example minigzip echo hello world | minigzip | minigzip -d clean: - rm $(OBJS) zlib.a example minigzip test foo.gz + $(RM) $(OBJS) zlib.a example minigzip minigzip.o test foo.gz diff --git a/etc/c/zlib/maketree.c b/etc/c/zlib/maketree.c deleted file mode 100644 index a16d4b146..000000000 --- a/etc/c/zlib/maketree.c +++ /dev/null @@ -1,85 +0,0 @@ -/* maketree.c -- make inffixed.h table for decoding fixed codes - * Copyright (C) 1995-2002 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* This program is included in the distribution for completeness. - You do not need to compile or run this program since inffixed.h - is already included in the distribution. To use this program - you need to compile zlib with BUILDFIXED defined and then compile - and link this program with the zlib library. Then the output of - this program can be piped to inffixed.h. */ - -#include -#include -#include "zutil.h" -#include "inftrees.h" - -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -/* generate initialization table for an inflate_huft structure array */ -void maketree(uInt b, inflate_huft *t) -{ - int i, e; - - i = 0; - while (1) - { - e = t[i].exop; - if (e && (e & (16+64)) == 0) /* table pointer */ - { - fprintf(stderr, "maketree: cannot initialize sub-tables!\n"); - exit(1); - } - if (i % 4 == 0) - printf("\n "); - printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base); - if (++i == (1< # include -#else - extern void exit OF((int)); #endif #ifdef USE_MMAP @@ -297,6 +295,8 @@ int main(argc, argv) break; argc--, argv++; } + if (outmode[3] == ' ') + outmode[3] = 0; if (argc == 0) { SET_BINARY_MODE(stdin); SET_BINARY_MODE(stdout); diff --git a/etc/c/zlib/trees.c b/etc/c/zlib/trees.c index bb0955493..395e4e168 100644 --- a/etc/c/zlib/trees.c +++ b/etc/c/zlib/trees.c @@ -1,5 +1,5 @@ /* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2003 Jean-loup Gailly + * Copyright (C) 1995-2005 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -555,7 +555,7 @@ local void gen_bitlen(s, desc) while (n != 0) { m = s->heap[--h]; if (m > max_code) continue; - if (tree[m].Len != (unsigned) bits) { + if ((unsigned) tree[m].Len != (unsigned) bits) { Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); s->opt_len += ((long)bits - (long)tree[m].Len) *(long)tree[m].Freq; @@ -930,8 +930,9 @@ void _tr_flush_block(s, buf, stored_len, eof) /* Build the Huffman trees unless a stored block is forced */ if (s->level > 0) { - /* Check if the file is ascii or binary */ - if (s->data_type == Z_UNKNOWN) set_data_type(s); + /* Check if the file is binary or text */ + if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN) + set_data_type(s); /* Construct the literal and distance trees */ build_tree(s, (tree_desc *)(&(s->l_desc))); @@ -982,7 +983,7 @@ void _tr_flush_block(s, buf, stored_len, eof) #ifdef FORCE_STATIC } else if (static_lenb >= 0) { /* force static trees */ #else - } else if (static_lenb == opt_lenb) { + } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { #endif send_bits(s, (STATIC_TREES<<1)+eof, 3); compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); @@ -1117,21 +1118,24 @@ local void compress_block(s, ltree, dtree) } /* =========================================================================== - * Set the data type to ASCII or BINARY, using a crude approximation: - * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. - * IN assertion: the fields freq of dyn_ltree are set and the total of all - * frequencies does not exceed 64K (to fit in an int on 16 bit machines). + * Set the data type to BINARY or TEXT, using a crude approximation: + * set it to Z_TEXT if all symbols are either printable characters (33 to 255) + * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise. + * IN assertion: the fields Freq of dyn_ltree are set. */ local void set_data_type(s) deflate_state *s; { - int n = 0; - unsigned ascii_freq = 0; - unsigned bin_freq = 0; - while (n < 7) bin_freq += s->dyn_ltree[n++].Freq; - while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq; - while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq; - s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII); + int n; + + for (n = 0; n < 9; n++) + if (s->dyn_ltree[n].Freq != 0) + break; + if (n == 9) + for (n = 14; n < 32; n++) + if (s->dyn_ltree[n].Freq != 0) + break; + s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY; } /* =========================================================================== diff --git a/etc/c/zlib/zconf.h b/etc/c/zlib/zconf.h index 3cea897ed..03a9431c8 100644 --- a/etc/c/zlib/zconf.h +++ b/etc/c/zlib/zconf.h @@ -1,5 +1,5 @@ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -13,43 +13,50 @@ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. */ #ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflatePrime z_deflatePrime -# define deflateParams z_deflateParams -# define deflateBound z_deflateBound -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateCopy z_inflateCopy -# define inflateReset z_inflateReset -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# define uncompress z_uncompress -# define adler32 z_adler32 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp #endif #if defined(__MSDOS__) && !defined(MSDOS) @@ -61,8 +68,10 @@ #if defined(_WINDOWS) && !defined(WINDOWS) # define WINDOWS #endif -#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) -# define WIN32 +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif #endif #if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) # if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) @@ -281,7 +290,7 @@ typedef uLong FAR uLongf; # ifdef VMS # include /* for off_t */ # endif -# define z_off_t off_t +# define z_off_t off_t #endif #ifndef SEEK_SET # define SEEK_SET 0 /* Seek from beginning of file. */ @@ -289,11 +298,11 @@ typedef uLong FAR uLongf; # define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ #endif #ifndef z_off_t -# define z_off_t long +# define z_off_t long #endif #if defined(__OS400__) -#define NO_vsnprintf +# define NO_vsnprintf #endif #if defined(__MVS__) diff --git a/etc/c/zlib/zconf.in.h b/etc/c/zlib/zconf.in.h index 3cea897ed..03a9431c8 100644 --- a/etc/c/zlib/zconf.in.h +++ b/etc/c/zlib/zconf.in.h @@ -1,5 +1,5 @@ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -13,43 +13,50 @@ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. */ #ifdef Z_PREFIX -# define deflateInit_ z_deflateInit_ -# define deflate z_deflate -# define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ -# define inflate z_inflate -# define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ -# define deflateSetDictionary z_deflateSetDictionary -# define deflateCopy z_deflateCopy -# define deflateReset z_deflateReset -# define deflatePrime z_deflatePrime -# define deflateParams z_deflateParams -# define deflateBound z_deflateBound -# define inflateInit2_ z_inflateInit2_ -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateCopy z_inflateCopy -# define inflateReset z_inflateReset -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# define uncompress z_uncompress -# define adler32 z_adler32 -# define crc32 z_crc32 -# define get_crc_table z_get_crc_table +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError -# define Byte z_Byte -# define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf -# define intf z_intf -# define uIntf z_uIntf -# define uLongf z_uLongf -# define voidpf z_voidpf -# define voidp z_voidp +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp #endif #if defined(__MSDOS__) && !defined(MSDOS) @@ -61,8 +68,10 @@ #if defined(_WINDOWS) && !defined(WINDOWS) # define WINDOWS #endif -#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) -# define WIN32 +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif #endif #if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) # if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) @@ -281,7 +290,7 @@ typedef uLong FAR uLongf; # ifdef VMS # include /* for off_t */ # endif -# define z_off_t off_t +# define z_off_t off_t #endif #ifndef SEEK_SET # define SEEK_SET 0 /* Seek from beginning of file. */ @@ -289,11 +298,11 @@ typedef uLong FAR uLongf; # define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ #endif #ifndef z_off_t -# define z_off_t long +# define z_off_t long #endif #if defined(__OS400__) -#define NO_vsnprintf +# define NO_vsnprintf #endif #if defined(__MVS__) diff --git a/etc/c/zlib/zlib.3 b/etc/c/zlib/zlib.3 index 890098449..90b816287 100644 --- a/etc/c/zlib/zlib.3 +++ b/etc/c/zlib/zlib.3 @@ -1,4 +1,4 @@ -.TH ZLIB 3 "17 November 2003" +.TH ZLIB 3 "18 July 2005" .SH NAME zlib \- compression/decompression library .SH SYNOPSIS @@ -133,8 +133,8 @@ before asking for help. Send questions and/or comments to zlib@gzip.org, or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). .SH AUTHORS -Version 1.2.1 -Copyright (C) 1995-2003 Jean-loup Gailly (jloup@gzip.org) +Version 1.2.3 +Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org) and Mark Adler (madler@alumni.caltech.edu). .LP This software is provided "as-is," diff --git a/etc/c/zlib/zlib.h b/etc/c/zlib/zlib.h index 92edf96ff..022817927 100644 --- a/etc/c/zlib/zlib.h +++ b/etc/c/zlib/zlib.h @@ -1,7 +1,7 @@ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.2.1, November 17th, 2003 + version 1.2.3, July 18th, 2005 - Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -37,8 +37,8 @@ extern "C" { #endif -#define ZLIB_VERSION "1.2.1" -#define ZLIB_VERNUM 0x1210 +#define ZLIB_VERSION "1.2.3" +#define ZLIB_VERNUM 0x1230 /* The 'zlib' compression library provides in-memory compression and @@ -53,24 +53,22 @@ extern "C" { application must provide more input and/or consume the output (providing more output space) before each call. - The compressed data format used by the in-memory functions is the zlib - format, which is a zlib wrapper documented in RFC 1950, wrapped around a - deflate stream, which is itself documented in RFC 1951. + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. The library also supports reading and writing files in gzip (.gz) format with an interface similar to that of stdio using the functions that start with "gz". The gzip format is different from the zlib format. gzip is a gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + This library can optionally read and write gzip streams in memory as well. + The zlib format was designed to be compact and fast for use in memory and on communications channels. The gzip format was designed for single- file compression on file systems, has a larger header than zlib to maintain directory information, and uses a different, slower check method than zlib. - This library does not provide any functions to write gzip files in memory. - However such functions could be easily written using zlib's deflate function, - the documentation in the gzip RFC, and the examples in gzio.c. - The library does not install any signal handler. The decoder checks the consistency of the compressed data, so the library should never crash even in case of corrupted input. @@ -97,13 +95,36 @@ typedef struct z_stream_s { free_func zfree; /* used to free the internal state */ voidpf opaque; /* private data object passed to zalloc and zfree */ - int data_type; /* best guess about the data type: ascii or binary */ + int data_type; /* best guess about the data type: binary or text */ uLong adler; /* adler32 value of the uncompressed data */ uLong reserved; /* reserved for future use */ } z_stream; typedef z_stream FAR *z_streamp; +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + /* The application must update next_in and avail_in when avail_in has dropped to zero. It must update next_out and avail_out when avail_out @@ -168,11 +189,13 @@ typedef z_stream FAR *z_streamp; #define Z_FILTERED 1 #define Z_HUFFMAN_ONLY 2 #define Z_RLE 3 +#define Z_FIXED 4 #define Z_DEFAULT_STRATEGY 0 /* compression strategy; see deflateInit2() below for details */ #define Z_BINARY 0 -#define Z_ASCII 1 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ #define Z_UNKNOWN 2 /* Possible values of the data_type field (though see inflate()) */ @@ -246,6 +269,10 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); and with zero avail_out, it must be called again after making room in the output buffer because there might be more output pending. + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumualte before producing output, in order to + maximize compression. + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is flushed to the output buffer and the output is aligned on a byte boundary, so that the decompressor can get all input data available so far. (In particular @@ -257,7 +284,7 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); Z_SYNC_FLUSH, and the compression state is reset so that decompression can restart from this point if previous compressed data has been damaged or if random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - the compression. + compression. If deflate returns with avail_out == 0, this function must be called again with the same value of the flush parameter and more output space (updated @@ -282,8 +309,8 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); deflate() sets strm->adler to the adler32 checksum of all input read so far (that is, total_in bytes). - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered binary. This field is only for information purposes and does not affect the compression algorithm in any manner. @@ -365,11 +392,11 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much output as possible to the output buffer. Z_BLOCK requests that inflate() stop - if and when it get to the next deflate block boundary. When decoding the zlib - or gzip format, this will cause inflate() to return immediately after the - header and before the first block. When doing a raw inflate, inflate() will - go ahead and process the first block, and will return when it gets to the end - of that block, or when it runs out of data. + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. The Z_BLOCK option assists in appending to or combining deflate streams. Also to assist in this, on return inflate() will set strm->data_type to the @@ -401,7 +428,7 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); because Z_BLOCK is used. If a preset dictionary is needed after this call (see inflateSetDictionary - below), inflate sets strm-adler to the adler32 checksum of the dictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise it sets strm->adler to the adler32 checksum of all output produced so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described @@ -478,7 +505,8 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, 16 to windowBits to write a simple gzip header and trailer around the compressed data instead of a zlib wrapper. The gzip header will have no file name, no extra data, no comment, no modification time (set to zero), - no header crc, and the operating system will be set to 255 (unknown). + no header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. The memLevel parameter specifies how much memory should be allocated for the internal compression state. memLevel=1 uses minimum memory but @@ -497,7 +525,9 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy parameter only affects the compression ratio but not the correctness of the - compressed output even if it is not set appropriately. + compressed output even if it is not set appropriately. Z_FIXED prevents the + use of dynamic Huffman codes, allowing for a simpler decoder for special + applications. deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid @@ -526,7 +556,9 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, deflateInit or deflateInit2, a part of the dictionary may in effect be discarded, for example if the dictionary is larger than the window size in deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. + put at the end of the dictionary, not at the front. In addition, the + current implementation of deflate will use at most the window size minus + 262 bytes of the provided dictionary. Upon return of this function, strm->adler is set to the adler32 value of the dictionary; the decompressor may later use this value to determine @@ -592,6 +624,23 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, if strm->avail_out was zero. */ +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, uLong sourceLen)); /* @@ -617,6 +666,30 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, stream state was inconsistent. */ +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + /* ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, int windowBits)); @@ -649,14 +722,15 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, windowBits can also be greater than 15 for optional gzip decoding. Add 32 to windowBits to enable zlib and gzip decoding with automatic header detection, or add 16 to decode only the gzip format (the zlib format will - return a Z_DATA_ERROR). + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is + a crc32 instead of an adler32. inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative - memLevel). msg is set to null if there is no error message. inflateInit2 - does not perform any decompression apart from reading the zlib header if - present: this will be done by inflate(). (So next_in and avail_in may be - modified, but next_out and avail_out are unchanged.) + memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg + is set to null if there is no error message. inflateInit2 does not perform + any decompression apart from reading the zlib header if present: this will + be done by inflate(). (So next_in and avail_in may be modified, but next_out + and avail_out are unchanged.) */ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, @@ -664,11 +738,14 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, uInt dictLength)); /* Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate - if this call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the adler32 value returned by this call of - inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary). + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a parameter is invalid (such as NULL dictionary) or the stream state is @@ -719,8 +796,64 @@ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); stream state was inconsistent (such as zalloc or state being NULL). */ +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); /* -ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits, + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK can be used to + force inflate() to return immediately after header processing is complete + and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When + any of extra, name, or comment are not Z_NULL and the respective field is + not present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, unsigned char FAR *window)); Initialize the internal stream state for decompression using inflateBack() @@ -744,7 +877,7 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits, typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); -ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm, +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, in_func in, void FAR *in_desc, out_func out, void FAR *out_desc)); /* @@ -813,7 +946,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm, that inflateBack() cannot return Z_OK. */ -ZEXTERN int ZEXPORT inflateBackEnd OF((z_stream FAR *strm)); +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); /* All memory allocated by inflateBackInit() is freed. @@ -1087,6 +1220,12 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file)); input stream, otherwise zero. */ +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns 1 if file is being read directly without decompression, otherwise + zero. +*/ + ZEXTERN int ZEXPORT gzclose OF((gzFile file)); /* Flushes all pending output if necessary, closes the compressed file @@ -1119,7 +1258,6 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); */ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); - /* Update a running Adler-32 checksum with the bytes buf[0..len-1] and return the updated checksum. If buf is NULL, this function returns @@ -1135,12 +1273,21 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); if (adler != original_adler) error(); */ +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); /* - Update a running crc with the bytes buf[0..len-1] and return the updated - crc. If buf is NULL, this function returns the required initial value - for the crc. Pre- and post-conditioning (one's complement) is performed - within this function so it shouldn't be done by the application. + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. Usage example: uLong crc = crc32(0L, Z_NULL, 0); @@ -1151,6 +1298,16 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); if (crc != original_crc) error(); */ +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + +/* + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + /* various hacks, don't look :) */ @@ -1167,7 +1324,7 @@ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, int stream_size)); ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, const char *version, int stream_size)); -ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits, +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, unsigned char FAR *window, const char *version, int stream_size)); @@ -1189,7 +1346,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits, struct internal_state {int dummy;}; /* hack for buggy compilers */ #endif -ZEXTERN const char * ZEXPORT zError OF((int err)); +ZEXTERN const char * ZEXPORT zError OF((int)); ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); diff --git a/etc/c/zlib/zlib.html b/etc/c/zlib/zlib.html deleted file mode 100644 index c34370386..000000000 --- a/etc/c/zlib/zlib.html +++ /dev/null @@ -1,971 +0,0 @@ - - - - zlib general purpose compression library version 1.1.4 - - - - - -

zlib 1.1.4 Manual

-
-

Contents

-
    -
  1. Prologue -
  2. Introduction -
  3. Utility functions -
  4. Basic functions -
  5. Advanced functions -
  6. Constants -
  7. struct z_stream_s -
  8. Checksum functions -
  9. Misc -
-
-

Prologue

- 'zlib' general purpose compression library version 1.1.4, March 11th, 2002 -

- Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler -

- This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. -

- Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: -

    -
  1. The origin of this software must not be misrepresented ; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. -
  2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. -
  3. This notice may not be removed or altered from any source distribution. -
- -
-
Jean-loup Gailly -
jloup@gzip.org -
Mark Adler -
madler@alumni.caltech.edu -
- - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files - - ftp://ds.internic.net/rfc/rfc1950.txt - (zlib format), - - rfc1951.txt - (deflate format) and - - rfc1952.txt - (gzip format). -

- This manual is converted from zlib.h by - piaip -

- Visit - http://ftp.cdrom.com/pub/infozip/zlib/ - for the official zlib web page. -

- -

-

Introduction

- The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same - stream interface. -

- - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. -

- - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio. -

- - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. -

- -

-

Utility functions

- The following utility functions are implemented on top of the - basic stream-oriented functions. - To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -

Function list

-
    -
  • int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); -
  • int compress2 (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level); -
  • int uncompress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); -
  • typedef voidp gzFile; -
  • gzFile gzopen (const char *path, const char *mode); -
  • gzFile gzdopen (int fd, const char *mode); -
  • int gzsetparams (gzFile file, int level, int strategy); -
  • int gzread (gzFile file, voidp buf, unsigned len); -
  • int gzwrite (gzFile file, const voidp buf, unsigned len); -
  • int VA gzprintf (gzFile file, const char *format, ...); -
  • int gzputs (gzFile file, const char *s); -
  • char * gzgets (gzFile file, char *buf, int len); -
  • int gzputc (gzFile file, int c); -
  • int gzgetc (gzFile file); -
  • int gzflush (gzFile file, int flush); -
  • z_off_t gzseek (gzFile file, z_off_t offset, int whence); -
  • z_off_t gztell (gzFile file); -
  • int gzrewind (gzFile file); -
  • int gzeof (gzFile file); -
  • int gzclose (gzFile file); -
  • const char * gzerror (gzFile file, int *errnum); -
-

Function description

-
-
int compress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); -
- Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the - compressed buffer.

- This function can be used to compress a whole file at once if the - input file is mmap'ed.

- compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer.

- -

int compress2 (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level); -
- Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. -

- - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -

- -

int uncompress (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen); -
- Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer.

- This function can be used to decompress a whole file at once if the - input file is mmap'ed. -

- - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -

- -

typedef voidp gzFile; -

- -

gzFile gzopen (const char *path, const char *mode); -
- Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for - Huffman only compression as in "wb1h". (See the description - of deflateInit2 for more information about the strategy parameter.) -

- - gzopen can be used to read a file which is not in gzip format ; in this - case gzread will directly read from the file without decompression. -

- - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state ; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). -

- -

gzFile gzdopen (int fd, const char *mode); -
- gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. -

- The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). -

- gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -

- -

int gzsetparams (gzFile file, int level, int strategy); -
- Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. -

- gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -

- -

int gzread (gzFile file, voidp buf, unsigned len); -
- Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. -

- gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). -

- -

int gzwrite (gzFile file, const voidp buf, unsigned len); -
- Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -

- -

int VA gzprintf (gzFile file, const char *format, ...); -
- Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). -

- -

int gzputs (gzFile file, const char *s); -
- Writes the given null-terminated string to the compressed file, excluding - the terminating null character. -

- gzputs returns the number of characters written, or -1 in case of error. -

- -

char * gzgets (gzFile file, char *buf, int len); -
- Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file - condition is encountered. The string is then terminated with a null - character. -

- gzgets returns buf, or Z_NULL in case of error. -

- -

int gzputc (gzFile file, int c); -
- Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -

- -

int gzgetc (gzFile file); -
- Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -

- -

int gzflush (gzFile file, int flush); -
- Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. -

- gzflush should be called only when strictly necessary because it can - degrade compression. -

- -

z_off_t gzseek (gzFile file, z_off_t offset, int whence); -
- Sets the starting position for the next gzread or gzwrite on the - given compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. -

- If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported ; gzseek then compresses a sequence of zeroes up to the new - starting position. -

- gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -

- -

int gzrewind (gzFile file); -
- Rewinds the given file. This function is supported only for reading. -

- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -

- -

z_off_t gztell (gzFile file); -
- Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. -

- - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -

- -

int gzeof (gzFile file); -
- Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -

- -

int gzclose (gzFile file); -
- Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -

- -

const char * gzerror (gzFile file, int *errnum); -
- Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -

-

-
-

Basic functions

-

Function list

- - -

Function description

-
-
const char * zlibVersion (void); -
The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. -

- -

int deflateInit (z_streamp strm, int level); -
- Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. -

- - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). -

- - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). -

- - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -

- -

int deflate (z_streamp strm, int flush); -
- deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some - output latency (reading input without producing any output) except when - forced to flush.

- - The detailed semantics are as follows. deflate performs one or both of the - following actions: - -

    -
  • Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - -
  • - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. -

- - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly ; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. -

- - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In particular - avail_in is zero after the call if enough output space has been provided - before the call.) Flushing may degrade compression for some compression - algorithms and so it should be used only when necessary. -

- - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - the compression. -

- - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). -

- - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space ; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. -

- - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - 0.1% larger than avail_in plus 12 bytes. If deflate does not return - Z_STREAM_END, then it must be called again as described above. -

- - deflate() sets strm-> adler to the adler32 checksum of all input read - so far (that is, total_in bytes). -

- - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. -

- - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). -

- -

int deflateEnd (z_streamp strm); -
- All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. -

- - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -

- -

int inflateInit (z_streamp strm); -
- Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the exact - value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly ; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. -

- - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller. msg is set to null if there is no error - message. inflateInit does not perform any decompression apart from reading - the zlib header if present: this will be done by inflate(). (So next_in and - avail_in may be modified, but next_out and avail_out are unchanged.) -

- -

int inflate (z_streamp strm, int flush); -
- inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may some - introduce some output latency (reading input without producing any output) - except when forced to flush. -

- - The detailed semantics are as follows. inflate performs one or both of the - following actions: - -

    -
  • Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - -
  • Provide more output starting at next_out and update next_out and - avail_out accordingly. inflate() provides as much output as possible, - until there is no more input data or no more space in the output buffer - (see below about the flush parameter). -

- - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. -

- - If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much - output as possible to the output buffer. The flushing behavior of inflate is - not specified for values of the flush parameter other than Z_SYNC_FLUSH - and Z_FINISH, but the current implementation actually flushes as much output - as possible anyway. -

- - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed ; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. -

- - If a preset dictionary is needed at this point (see inflateSetDictionary - below), inflate sets strm-adler to the adler32 checksum of the - dictionary chosen by the compressor and returns Z_NEED_DICT ; otherwise - it sets strm-> adler to the adler32 checksum of all output produced - so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or - an error code as described below. At the end of the stream, inflate() - checks that its computed adler32 checksum is equal to that saved by the - compressor and returns Z_STREAM_END only if the checksum is correct. -

- - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect - adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent - (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if no progress is possible or if there was not - enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR - case, the application may then call inflateSync to look for a good - compression block. -

- -

int inflateEnd (z_streamp strm); -
- All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. -

- - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). -

-
-

Advanced functions

- The following functions are needed only in some special applications. -

Function list

- -

Function description

-
-
int deflateInit2 (z_streamp strm, int level, int method, int windowBits, int memLevel, int strategy); - -
This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller.

- - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library.

- - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead.

- - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio ; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel.

- - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match). Filtered data consists mostly of small values with a - somewhat random distribution. In this case, the compression algorithm is - tuned to compress them better. The effect of Z_FILTERED is to force more - Huffman coding and less string matching ; it is somewhat intermediate - between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects - the compression ratio but not the correctness of the compressed output even - if it is not set appropriately.

- - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid - method). msg is set to null if there is no error message. deflateInit2 does - not perform any compression: this will be done by deflate().

- -

int deflateSetDictionary (z_streamp strm, const Bytef *dictionary, uInt dictLength); -
- Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary).

- - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy ; the data can then be compressed better than - with the default empty dictionary.

- - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front.

- - Upon return of this function, strm-> adler is set to the Adler32 value - of the dictionary ; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The Adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.)

- - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate().

- -

int deflateCopy (z_streamp dest, z_streamp source); -
- Sets the destination stream as a complete copy of the source stream.

- - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory.

- - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination.

- -

int deflateReset (z_streamp strm); -
This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2.

- - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL).

- -

int deflateParams (z_streamp strm, int level, int strategy); -
- Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate().

- - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm-> avail_out must be - non-zero.

- - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero.

- -

int inflateInit2 (z_streamp strm, int windowBits); - -
This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller.

- - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. If a compressed stream with a larger window size is given as - input, inflate() will return with the error code Z_DATA_ERROR instead of - trying to allocate a larger window.

- - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative - memLevel). msg is set to null if there is no error message. inflateInit2 - does not perform any decompression apart from reading the zlib header if - present: this will be done by inflate(). (So next_in and avail_in may be - modified, but next_out and avail_out are unchanged.)

- -

int inflateSetDictionary (z_streamp strm, const Bytef *dictionary, uInt dictLength); -
- Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate - if this call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the Adler32 value returned by this call of - inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary).

- - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect Adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate().

- -

int inflateSync (z_streamp strm); - -
Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided.

- - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data.

- -

int inflateReset (z_streamp strm); -
- This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. -

- - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -

-

- -
-

Checksum functions

- These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -

Function list

- -

Function description

-
-
uLong adler32 (uLong adler, const Bytef *buf, uInt len); -
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. -

- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - 

-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-
- -
uLong crc32 (uLong crc, const Bytef *buf, uInt len); -
- Update a running crc with the bytes buf[0..len-1] and return the updated - crc. If buf is NULL, this function returns the required initial value - for the crc. Pre- and post-conditioning (one's complement) is performed - within this function so it shouldn't be done by the application. - Usage example: - 
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-
-
-
-

struct z_stream_s

- - -
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream ;
-
-typedef z_stream FAR * z_streamp;  ÿ 
-
- - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application.

- - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value.

- - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe.

- - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). -

- - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step).

- -

-

Constants

- -
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1 
-	/* will be removed, use Z_SYNC_FLUSH instead */
-#define Z_SYNC_FLUSH    2
-#define Z_FULL_FLUSH    3
-#define Z_FINISH        4
-/* Allowed flush values ; see deflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy ; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions less than 1.0.2 */
-
- - -
-

Misc

- deflateInit and inflateInit are macros to allow checking the zlib version - and the compiler's view of z_stream. -

- Other functions: -

-
const char * zError (int err); -
int inflateSyncPoint (z_streamp z); -
const uLongf * get_crc_table (void); -
-
- - Last update: Wed Oct 13 20:42:34 1999
- piapi@csie.ntu.edu.tw - - - - diff --git a/etc/c/zlib/zutil.c b/etc/c/zlib/zutil.c index 0ef4f99f5..d55f5948a 100644 --- a/etc/c/zlib/zutil.c +++ b/etc/c/zlib/zutil.c @@ -1,5 +1,5 @@ /* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -11,10 +11,6 @@ struct internal_state {int dummy;}; /* for buggy compilers */ #endif -#ifndef STDC -extern void exit OF((int)); -#endif - const char * const z_errmsg[10] = { "need dictionary", /* Z_NEED_DICT 2 */ "stream end", /* Z_STREAM_END 1 */ @@ -78,38 +74,38 @@ uLong ZEXPORT zlibCompileFlags() flags += 1 << 13; #endif #ifdef NO_GZCOMPRESS - flags += 1 << 16; + flags += 1L << 16; #endif #ifdef NO_GZIP - flags += 1 << 17; + flags += 1L << 17; #endif #ifdef PKZIP_BUG_WORKAROUND - flags += 1 << 20; + flags += 1L << 20; #endif #ifdef FASTEST - flags += 1 << 21; + flags += 1L << 21; #endif #ifdef STDC # ifdef NO_vsnprintf - flags += 1 << 25; + flags += 1L << 25; # ifdef HAS_vsprintf_void - flags += 1 << 26; + flags += 1L << 26; # endif # else # ifdef HAS_vsnprintf_void - flags += 1 << 26; + flags += 1L << 26; # endif # endif #else - flags += 1 << 24; + flags += 1L << 24; # ifdef NO_snprintf - flags += 1 << 25; + flags += 1L << 25; # ifdef HAS_sprintf_void - flags += 1 << 26; + flags += 1L << 26; # endif # else # ifdef HAS_snprintf_void - flags += 1 << 26; + flags += 1L << 26; # endif # endif #endif @@ -141,7 +137,10 @@ const char * ZEXPORT zError(err) } #if defined(_WIN32_WCE) - /* does not exist on WCE */ + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. + */ int errno = 0; #endif diff --git a/etc/c/zlib/zutil.h b/etc/c/zlib/zutil.h index 87b70acec..b7d5eff81 100644 --- a/etc/c/zlib/zutil.h +++ b/etc/c/zlib/zutil.h @@ -1,5 +1,5 @@ /* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2003 Jean-loup Gailly. + * Copyright (C) 1995-2005 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -17,14 +17,26 @@ #include "zlib.h" #ifdef STDC -# include +# ifndef _WIN32_WCE +# include +# endif # include # include #endif #ifdef NO_ERRNO_H +# ifdef _WIN32_WCE + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. We rename it to + * avoid conflict with other libraries that use the same workaround. + */ +# define errno z_errno +# endif extern int errno; #else -# include +# ifndef _WIN32_WCE +# include +# endif #endif #ifndef local @@ -105,6 +117,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #ifdef OS2 # define OS_CODE 0x06 +# ifdef M_I86 + #include +# endif #endif #if defined(MACOS) || defined(TARGET_OS_MAC) @@ -189,12 +204,8 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ # define NO_vsnprintf # endif #endif - -#ifdef HAVE_STRERROR - extern char *strerror OF((int)); -# define zstrerror(errnum) strerror(errnum) -#else -# define zstrerror(errnum) "" +#ifdef VMS +# define NO_vsnprintf #endif #if defined(pyr) diff --git a/internal/aApply.d b/internal/aApply.d index e13fc2761..04068afa7 100644 --- a/internal/aApply.d +++ b/internal/aApply.d @@ -112,9 +112,9 @@ extern (C) int _aApplywc1(wchar[] aa, dg_t dg) d = std.utf.decode(aa, i); b = std.utf.toUTF8(buf, d); - foreach (char c; b) + foreach (char c2; b) { - result = dg(cast(void *)&c); + result = dg(cast(void *)&c2); if (result) return result; } @@ -145,9 +145,9 @@ extern (C) int _aApplydc1(dchar[] aa, dg_t dg) char[] b; b = std.utf.toUTF8(buf, d); - foreach (char c; b) + foreach (char c2; b) { - result = dg(cast(void *)&c); + result = dg(cast(void *)&c2); if (result) return result; } @@ -305,9 +305,9 @@ extern (C) int _aApplywc2(wchar[] aa, dg2_t dg) d = std.utf.decode(aa, n); n -= i; b = std.utf.toUTF8(buf, d); - foreach (char c; b) + foreach (char c2; b) { - result = dg(&i, cast(void *)&c); + result = dg(&i, cast(void *)&c2); if (result) return result; } @@ -341,9 +341,9 @@ extern (C) int _aApplydc2(dchar[] aa, dg2_t dg) char[] b; b = std.utf.toUTF8(buf, d); - foreach (char c; b) + foreach (char c2; b) { - result = dg(&i, cast(void *)&c); + result = dg(&i, cast(void *)&c2); if (result) return result; } diff --git a/internal/gc/linux.mak b/internal/gc/linux.mak index 65f7a92d0..a02d1462e 100644 --- a/internal/gc/linux.mak +++ b/internal/gc/linux.mak @@ -3,7 +3,7 @@ #DMD=../../../dmd DMD=dmd -CFLAGS=-g +CFLAGS=-g -m32 #DFLAGS=-unittest -g -release DFLAGS=-release -O -inline -I../.. #DFLAGS=-release -inline -O @@ -43,8 +43,8 @@ gclinux.o : gclinux.d $(DMD) -c $(DFLAGS) gclinux.d zip : $(SRC) - rm dmgc.zip + $(RM) dmgc.zip zip dmgc $(SRC) clean: - rm $(OBJS) dmgc.a testgc testgc.o + $(RM) $(OBJS) dmgc.a testgc testgc.o diff --git a/linux.mak b/linux.mak index b20759270..c930f2919 100644 --- a/linux.mak +++ b/linux.mak @@ -9,8 +9,8 @@ # make unittest # Build libphobos.a, build and run unit tests -CFLAGS=-O -#CFLAGS=-g +CFLAGS=-O -m32 +#CFLAGS=-g -m32 DFLAGS=-O -release -w #DFLAGS=-unittest -w @@ -45,7 +45,7 @@ unittest : unittest.o libphobos.a unittest.o : unittest.d $(DMD) -c unittest -OBJS= asserterror.o deh2.o switch.o complex.o gcstats.o \ +OBJS = asserterror.o deh2.o switch.o complex.o gcstats.o \ critical.o object.o monitor.o arraycat.o invariant.o \ dmain2.o outofmemory.o aaA.o adi.o aApply.o file.o \ compiler.o system.o moduleinit.o md5.o base64.o \ @@ -53,7 +53,7 @@ OBJS= asserterror.o deh2.o switch.o complex.o gcstats.o \ outbuffer.o ctype.o regexp.o random.o linux.o linuxsocket.o \ stream.o cstream.o switcherr.o array.o gc.o \ qsort.o thread.o obj.o utf.o uri.o \ - crc32.o conv.o arraycast.o errno.o alloca.o cmath2.o \ + Dcrc32.o conv.o arraycast.o errno.o alloca.o cmath2.o \ process.o syserror.o \ socket.o socketstream.o stdarg.o stdio.o format.o \ perf.o openrj.o uni.o trace.o boxer.o \ @@ -71,7 +71,7 @@ OBJS= asserterror.o deh2.o switch.o complex.o gcstats.o \ ti_void.o \ date.o dateparse.o llmath.o math2.o Czlib.o Dzlib.o zip.o -ZLIB_OBJS= etc/c/zlib/adler32.o etc/c/zlib/compress.o \ +ZLIB_OBJS = etc/c/zlib/adler32.o etc/c/zlib/compress.o \ etc/c/zlib/crc32.o etc/c/zlib/gzio.o \ etc/c/zlib/uncompr.o etc/c/zlib/deflate.o \ etc/c/zlib/trees.o etc/c/zlib/zutil.o \ @@ -172,7 +172,6 @@ SRC_ZLIB= etc/c/zlib\trees.h \ etc/c/zlib\zlib.h \ etc/c/zlib\adler32.c \ etc/c/zlib\ChangeLog \ - etc/c/zlib\zlib.html \ etc/c/zlib\README \ etc/c/zlib\win32.mak \ etc/c/zlib\linux.mak @@ -212,8 +211,8 @@ $(ZLIB_OBJS): ### -crc32.o : crc32.d - $(DMD) -c $(DFLAGS) crc32.d +Dcrc32.o : crc32.d + $(DMD) -c $(DFLAGS) crc32.d -ofDcrc32.o errno.o : errno.c @@ -580,8 +579,8 @@ ti_bit.o : std/typeinfo/ti_bit.d ##########################################################333 zip : $(ALLSRCS) linux.mak win32.mak phoboslicense.txt - rm phobos.zip + $(RM) phobos.zip zip phobos $(ALLSRCS) linux.mak win32.mak phoboslicense.txt clean: - rm $(OBJS) unittest unittest.o + $(RM) $(OBJS) unittest unittest.o diff --git a/std/cover.d b/std/cover.d index 90455d8ad..a771930b9 100644 --- a/std/cover.d +++ b/std/cover.d @@ -124,14 +124,14 @@ static ~this() if (i >= c.data.length) break; int count = 0; - foreach (char c; lstlines[i]) + foreach (char c2; lstlines[i]) { - switch (c) + switch (c2) { case ' ': continue; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': - count = count * 10 + c - '0'; + count = count * 10 + c2 - '0'; continue; default: break; diff --git a/std/utf.d b/std/utf.d index 8e8d44317..a77000a2b 100644 --- a/std/utf.d +++ b/std/utf.d @@ -730,9 +730,9 @@ char[] toUTF8(dchar[] s) else { r.length = i; - foreach (dchar c; s[i .. slen]) + foreach (dchar d; s[i .. slen]) { - encode(r, c); + encode(r, d); } break; } diff --git a/win32.mak b/win32.mak index fee5c2bd9..710d12229 100644 --- a/win32.mak +++ b/win32.mak @@ -222,7 +222,6 @@ SRC_ZLIB= etc\c\zlib\trees.h \ etc\c\zlib\zlib.h \ etc\c\zlib\adler32.c \ etc\c\zlib\ChangeLog \ - etc\c\zlib\zlib.html \ etc\c\zlib\README \ etc\c\zlib\win32.mak \ etc\c\zlib\linux.mak