openssl/test/recipes/70-test_key_share.t

389 lines
14 KiB
Perl

#! /usr/bin/env perl
# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
use OpenSSL::Test::Utils;
use TLSProxy::Proxy;
use File::Temp qw(tempfile);
use constant {
LOOK_ONLY => 0,
EMPTY_EXTENSION => 1,
MISSING_EXTENSION => 2,
NO_ACCEPTABLE_KEY_SHARES => 3,
NON_PREFERRED_KEY_SHARE => 4,
ACCEPTABLE_AT_END => 5,
NOT_IN_SUPPORTED_GROUPS => 6,
GROUP_ID_TOO_SHORT => 7,
KEX_LEN_MISMATCH => 8,
ZERO_LEN_KEX_DATA => 9,
TRAILING_DATA => 10,
SELECT_X25519 => 11,
NO_KEY_SHARES_IN_HRR => 12
};
use constant {
CLIENT_TO_SERVER => 1,
SERVER_TO_CLIENT => 2
};
use constant {
X25519 => 0x1d,
P_256 => 0x17
};
my $testtype;
my $direction;
my $selectedgroupid;
my $test_name = "test_key_share";
setup($test_name);
plan skip_all => "TLSProxy isn't usable on $^O"
if $^O =~ /^(VMS)$/;
plan skip_all => "$test_name needs the dynamic engine feature enabled"
if disabled("engine") || disabled("dynamic-engine");
plan skip_all => "$test_name needs the sock feature enabled"
if disabled("sock");
plan skip_all => "$test_name needs TLS1.3 enabled"
if disabled("tls1_3");
$ENV{OPENSSL_ia32cap} = '~0x200000200000000';
my $proxy = TLSProxy::Proxy->new(
undef,
cmdstr(app(["openssl"]), display => 1),
srctop_file("apps", "server.pem"),
(!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
);
#We assume that test_ssl_new and friends will test the happy path for this,
#so we concentrate on the less common scenarios
#Test 1: An empty key_shares extension should succeed after a HelloRetryRequest
$testtype = EMPTY_EXTENSION;
$direction = CLIENT_TO_SERVER;
$proxy->filter(\&modify_key_shares_filter);
$proxy->serverflags("-curves P-256");
$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
plan tests => 22;
ok(TLSProxy::Message->success(), "Success after HRR");
#Test 2: The server sending an HRR requesting a group the client already sent
# should fail
$proxy->clear();
$proxy->start();
ok(TLSProxy::Message->fail(), "Server asks for group already provided");
#Test 3: A missing key_shares extension should not succeed
$proxy->clear();
$testtype = MISSING_EXTENSION;
$proxy->start();
ok(TLSProxy::Message->fail(), "Missing key_shares extension");
#Test 4: No initial acceptable key_shares should succeed after a
# HelloRetryRequest
$proxy->clear();
$proxy->filter(undef);
$proxy->serverflags("-curves P-256");
$proxy->start();
ok(TLSProxy::Message->success(), "No initial acceptable key_shares");
#Test 5: No acceptable key_shares and no shared groups should fail
$proxy->clear();
$proxy->filter(undef);
$proxy->serverflags("-curves P-256");
$proxy->clientflags("-curves P-384");
$proxy->start();
ok(TLSProxy::Message->fail(), "No acceptable key_shares");
#Test 6: A non preferred but acceptable key_share should succeed
$proxy->clear();
$proxy->clientflags("-curves P-256");
$proxy->start();
ok(TLSProxy::Message->success(), "Non preferred key_share");
$proxy->filter(\&modify_key_shares_filter);
#Test 7: An acceptable key_share after a list of non-acceptable ones should
#succeed
$proxy->clear();
$testtype = ACCEPTABLE_AT_END;
$proxy->start();
ok(TLSProxy::Message->success(), "Acceptable key_share at end of list");
#Test 8: An acceptable key_share but for a group not in supported_groups should
#fail
$proxy->clear();
$testtype = NOT_IN_SUPPORTED_GROUPS;
$proxy->start();
ok(TLSProxy::Message->fail(), "Acceptable key_share not in supported_groups");
#Test 9: Too short group_id should fail
$proxy->clear();
$testtype = GROUP_ID_TOO_SHORT;
$proxy->start();
ok(TLSProxy::Message->fail(), "Group id too short");
#Test 10: key_exchange length mismatch should fail
$proxy->clear();
$testtype = KEX_LEN_MISMATCH;
$proxy->start();
ok(TLSProxy::Message->fail(), "key_exchange length mismatch");
#Test 11: Zero length key_exchange should fail
$proxy->clear();
$testtype = ZERO_LEN_KEX_DATA;
$proxy->start();
ok(TLSProxy::Message->fail(), "zero length key_exchange data");
#Test 12: Trailing data on key_share list should fail
$proxy->clear();
$testtype = TRAILING_DATA;
$proxy->start();
ok(TLSProxy::Message->fail(), "key_share list trailing data");
#Test 13: Multiple acceptable key_shares - we choose the first one
$proxy->clear();
$direction = SERVER_TO_CLIENT;
$testtype = LOOK_ONLY;
$proxy->clientflags("-curves P-256:X25519");
$proxy->start();
ok(TLSProxy::Message->success() && ($selectedgroupid == P_256),
"Multiple acceptable key_shares");
#Test 14: Multiple acceptable key_shares - we choose the first one (part 2)
$proxy->clear();
$proxy->clientflags("-curves X25519:P-256");
$proxy->start();
ok(TLSProxy::Message->success() && ($selectedgroupid == X25519),
"Multiple acceptable key_shares (part 2)");
#Test 15: Server sends key_share that wasn't offered should fail
$proxy->clear();
$testtype = SELECT_X25519;
$proxy->clientflags("-curves P-256");
$proxy->start();
ok(TLSProxy::Message->fail(), "Non offered key_share");
#Test 16: Too short group_id in ServerHello should fail
$proxy->clear();
$testtype = GROUP_ID_TOO_SHORT;
$proxy->start();
ok(TLSProxy::Message->fail(), "Group id too short in ServerHello");
#Test 17: key_exchange length mismatch in ServerHello should fail
$proxy->clear();
$testtype = KEX_LEN_MISMATCH;
$proxy->start();
ok(TLSProxy::Message->fail(), "key_exchange length mismatch in ServerHello");
#Test 18: Zero length key_exchange in ServerHello should fail
$proxy->clear();
$testtype = ZERO_LEN_KEX_DATA;
$proxy->start();
ok(TLSProxy::Message->fail(), "zero length key_exchange data in ServerHello");
#Test 19: Trailing data on key_share in ServerHello should fail
$proxy->clear();
$testtype = TRAILING_DATA;
$proxy->start();
ok(TLSProxy::Message->fail(), "key_share trailing data in ServerHello");
SKIP: {
skip "No TLSv1.2 support in this OpenSSL build", 2 if disabled("tls1_2");
#Test 20: key_share should not be sent if the client is not capable of
# negotiating TLSv1.3
$proxy->clear();
$proxy->filter(undef);
$proxy->clientflags("-no_tls1_3");
$proxy->start();
my $clienthello = $proxy->message_list->[0];
ok(TLSProxy::Message->success()
&& !defined $clienthello->extension_data->{TLSProxy::Message::EXT_KEY_SHARE},
"No key_share for TLS<=1.2 client");
$proxy->filter(\&modify_key_shares_filter);
#Test 21: A server not capable of negotiating TLSv1.3 should not attempt to
# process a key_share
$proxy->clear();
$direction = CLIENT_TO_SERVER;
$testtype = NO_ACCEPTABLE_KEY_SHARES;
$proxy->serverflags("-no_tls1_3");
$proxy->start();
ok(TLSProxy::Message->success(), "Ignore key_share for TLS<=1.2 server");
}
#Test 22: The server sending an HRR but not requesting a new key_share should
# fail
$proxy->clear();
$direction = SERVER_TO_CLIENT;
$testtype = NO_KEY_SHARES_IN_HRR;
$proxy->serverflags("-curves X25519");
$proxy->start();
ok(TLSProxy::Message->fail(), "Server sends HRR with no key_shares");
sub modify_key_shares_filter
{
my $proxy = shift;
# We're only interested in the initial ClientHello
if (($direction == CLIENT_TO_SERVER && $proxy->flight != 0
&& ($proxy->flight != 1 || $testtype != NO_KEY_SHARES_IN_HRR))
|| ($direction == SERVER_TO_CLIENT && $proxy->flight != 1)) {
return;
}
foreach my $message (@{$proxy->message_list}) {
if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO
&& $direction == CLIENT_TO_SERVER) {
my $ext;
my $suppgroups;
#Setup supported groups to include some unrecognised groups
$suppgroups = pack "C8",
0x00, 0x06, #List Length
0xff, 0xfe, #Non existing group 1
0xff, 0xff, #Non existing group 2
0x00, 0x1d; #x25519
if ($testtype == EMPTY_EXTENSION) {
$ext = pack "C2",
0x00, 0x00;
} elsif ($testtype == NO_ACCEPTABLE_KEY_SHARES) {
$ext = pack "C12",
0x00, 0x0a, #List Length
0xff, 0xfe, #Non existing group 1
0x00, 0x01, 0xff, #key_exchange data
0xff, 0xff, #Non existing group 2
0x00, 0x01, 0xff; #key_exchange data
} elsif ($testtype == ACCEPTABLE_AT_END) {
$ext = pack "C11H64",
0x00, 0x29, #List Length
0xff, 0xfe, #Non existing group 1
0x00, 0x01, 0xff, #key_exchange data
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421"; #key_exchange data
} elsif ($testtype == NOT_IN_SUPPORTED_GROUPS) {
$suppgroups = pack "C4",
0x00, 0x02, #List Length
0x00, 0xfe; #Non existing group 1
} elsif ($testtype == GROUP_ID_TOO_SHORT) {
$ext = pack "C6H64C1",
0x00, 0x25, #List Length
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421"; #key_exchange data
0x00; #Group id too short
} elsif ($testtype == KEX_LEN_MISMATCH) {
$ext = pack "C8",
0x00, 0x06, #List Length
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
0x15, 0x51; #Only two bytes of data, but length should be 32
} elsif ($testtype == ZERO_LEN_KEX_DATA) {
$ext = pack "C10H64",
0x00, 0x28, #List Length
0xff, 0xfe, #Non existing group 1
0x00, 0x00, #zero length key_exchange data is invalid
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421"; #key_exchange data
} elsif ($testtype == TRAILING_DATA) {
$ext = pack "C6H64C1",
0x00, 0x24, #List Length
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421", #key_exchange data
0x00; #Trailing garbage
} elsif ($testtype == NO_KEY_SHARES_IN_HRR) {
#We trick the server into thinking we sent a P-256 key_share -
#but the client actually sent X25519
$ext = pack "C7",
0x00, 0x05, #List Length
0x00, 0x17, #P-256
0x00, 0x01, #key_exchange data length
0xff; #Dummy key_share data
}
if ($testtype != EMPTY_EXTENSION
&& $testtype != NO_KEY_SHARES_IN_HRR) {
$message->set_extension(
TLSProxy::Message::EXT_SUPPORTED_GROUPS, $suppgroups);
}
if ($testtype == MISSING_EXTENSION) {
$message->delete_extension(
TLSProxy::Message::EXT_KEY_SHARE);
} elsif ($testtype != NOT_IN_SUPPORTED_GROUPS) {
$message->set_extension(
TLSProxy::Message::EXT_KEY_SHARE, $ext);
}
$message->repack();
} elsif ($message->mt == TLSProxy::Message::MT_SERVER_HELLO
&& $direction == SERVER_TO_CLIENT) {
my $ext;
my $key_share =
$message->extension_data->{TLSProxy::Message::EXT_KEY_SHARE};
$selectedgroupid = unpack("n", $key_share);
if ($testtype == LOOK_ONLY) {
return;
}
if ($testtype == NO_KEY_SHARES_IN_HRR) {
$message->delete_extension(TLSProxy::Message::EXT_KEY_SHARE);
$message->set_extension(TLSProxy::Message::EXT_UNKNOWN, "");
$message->repack();
return;
}
if ($testtype == SELECT_X25519) {
$ext = pack "C4H64",
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421"; #key_exchange data
} elsif ($testtype == GROUP_ID_TOO_SHORT) {
$ext = pack "C1",
0x00;
} elsif ($testtype == KEX_LEN_MISMATCH) {
$ext = pack "C6",
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
0x15, 0x51; #Only two bytes of data, but length should be 32
} elsif ($testtype == ZERO_LEN_KEX_DATA) {
$ext = pack "C4",
0x00, 0x1d, #x25519
0x00, 0x00, #zero length key_exchange data is invalid
} elsif ($testtype == TRAILING_DATA) {
$ext = pack "C4H64C1",
0x00, 0x1d, #x25519
0x00, 0x20, #key_exchange data length
"155155B95269ED5C87EAA99C2EF5A593".
"EDF83495E80380089F831B94D14B1421", #key_exchange data
0x00; #Trailing garbage
}
$message->set_extension(TLSProxy::Message::EXT_KEY_SHARE, $ext);
$message->repack();
}
}
}