openssl/crypto/bn/asm/x86_64-gf2m.pl

425 lines
9.3 KiB
Perl

#! /usr/bin/env perl
# Copyright 2011-2020 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
#
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# May 2011
#
# The module implements bn_GF2m_mul_2x2 polynomial multiplication used
# in bn_gf2m.c. It's kind of low-hanging mechanical port from C for
# the time being... Except that it has two code paths: code suitable
# for any x86_64 CPU and PCLMULQDQ one suitable for Westmere and
# later. Improvement varies from one benchmark and µ-arch to another.
# Vanilla code path is at most 20% faster than compiler-generated code
# [not very impressive], while PCLMULQDQ - whole 85%-160% better on
# 163- and 571-bit ECDH benchmarks on Intel CPUs. Keep in mind that
# these coefficients are not ones for bn_GF2m_mul_2x2 itself, as not
# all CPU time is burnt in it...
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
*STDOUT=*OUT;
($lo,$hi)=("%rax","%rdx"); $a=$lo;
($i0,$i1)=("%rsi","%rdi");
($t0,$t1)=("%rbx","%rcx");
($b,$mask)=("%rbp","%r8");
($a1,$a2,$a4,$a8,$a12,$a48)=map("%r$_",(9..15));
($R,$Tx)=("%xmm0","%xmm1");
$code.=<<___;
.text
.type _mul_1x1,\@abi-omnipotent
.align 16
_mul_1x1:
.cfi_startproc
sub \$128+8,%rsp
.cfi_adjust_cfa_offset 128+8
mov \$-1,$a1
lea ($a,$a),$i0
shr \$3,$a1
lea (,$a,4),$i1
and $a,$a1 # a1=a&0x1fffffffffffffff
lea (,$a,8),$a8
sar \$63,$a # broadcast 63rd bit
lea ($a1,$a1),$a2
sar \$63,$i0 # broadcast 62nd bit
lea (,$a1,4),$a4
and $b,$a
sar \$63,$i1 # broadcast 61st bit
mov $a,$hi # $a is $lo
shl \$63,$lo
and $b,$i0
shr \$1,$hi
mov $i0,$t1
shl \$62,$i0
and $b,$i1
shr \$2,$t1
xor $i0,$lo
mov $i1,$t0
shl \$61,$i1
xor $t1,$hi
shr \$3,$t0
xor $i1,$lo
xor $t0,$hi
mov $a1,$a12
movq \$0,0(%rsp) # tab[0]=0
xor $a2,$a12 # a1^a2
mov $a1,8(%rsp) # tab[1]=a1
mov $a4,$a48
mov $a2,16(%rsp) # tab[2]=a2
xor $a8,$a48 # a4^a8
mov $a12,24(%rsp) # tab[3]=a1^a2
xor $a4,$a1
mov $a4,32(%rsp) # tab[4]=a4
xor $a4,$a2
mov $a1,40(%rsp) # tab[5]=a1^a4
xor $a4,$a12
mov $a2,48(%rsp) # tab[6]=a2^a4
xor $a48,$a1 # a1^a4^a4^a8=a1^a8
mov $a12,56(%rsp) # tab[7]=a1^a2^a4
xor $a48,$a2 # a2^a4^a4^a8=a1^a8
mov $a8,64(%rsp) # tab[8]=a8
xor $a48,$a12 # a1^a2^a4^a4^a8=a1^a2^a8
mov $a1,72(%rsp) # tab[9]=a1^a8
xor $a4,$a1 # a1^a8^a4
mov $a2,80(%rsp) # tab[10]=a2^a8
xor $a4,$a2 # a2^a8^a4
mov $a12,88(%rsp) # tab[11]=a1^a2^a8
xor $a4,$a12 # a1^a2^a8^a4
mov $a48,96(%rsp) # tab[12]=a4^a8
mov $mask,$i0
mov $a1,104(%rsp) # tab[13]=a1^a4^a8
and $b,$i0
mov $a2,112(%rsp) # tab[14]=a2^a4^a8
shr \$4,$b
mov $a12,120(%rsp) # tab[15]=a1^a2^a4^a8
mov $mask,$i1
and $b,$i1
shr \$4,$b
movq (%rsp,$i0,8),$R # half of calculations is done in SSE2
mov $mask,$i0
and $b,$i0
shr \$4,$b
___
for ($n=1;$n<8;$n++) {
$code.=<<___;
mov (%rsp,$i1,8),$t1
mov $mask,$i1
mov $t1,$t0
shl \$`8*$n-4`,$t1
and $b,$i1
movq (%rsp,$i0,8),$Tx
shr \$`64-(8*$n-4)`,$t0
xor $t1,$lo
pslldq \$$n,$Tx
mov $mask,$i0
shr \$4,$b
xor $t0,$hi
and $b,$i0
shr \$4,$b
pxor $Tx,$R
___
}
$code.=<<___;
mov (%rsp,$i1,8),$t1
mov $t1,$t0
shl \$`8*$n-4`,$t1
movq $R,$i0
shr \$`64-(8*$n-4)`,$t0
xor $t1,$lo
psrldq \$8,$R
xor $t0,$hi
movq $R,$i1
xor $i0,$lo
xor $i1,$hi
add \$128+8,%rsp
.cfi_adjust_cfa_offset -128-8
ret
.Lend_mul_1x1:
.cfi_endproc
.size _mul_1x1,.-_mul_1x1
___
($rp,$a1,$a0,$b1,$b0) = $win64? ("%rcx","%rdx","%r8", "%r9","%r10") : # Win64 order
("%rdi","%rsi","%rdx","%rcx","%r8"); # Unix order
$code.=<<___;
.extern OPENSSL_ia32cap_P
.globl bn_GF2m_mul_2x2
.type bn_GF2m_mul_2x2,\@abi-omnipotent
.align 16
bn_GF2m_mul_2x2:
.cfi_startproc
mov %rsp,%rax
mov OPENSSL_ia32cap_P(%rip),%r10
bt \$33,%r10
jnc .Lvanilla_mul_2x2
movq $a1,%xmm0
movq $b1,%xmm1
movq $a0,%xmm2
___
$code.=<<___ if ($win64);
movq 40(%rsp),%xmm3
___
$code.=<<___ if (!$win64);
movq $b0,%xmm3
___
$code.=<<___;
movdqa %xmm0,%xmm4
movdqa %xmm1,%xmm5
pclmulqdq \$0,%xmm1,%xmm0 # a1·b1
pxor %xmm2,%xmm4
pxor %xmm3,%xmm5
pclmulqdq \$0,%xmm3,%xmm2 # a0·b0
pclmulqdq \$0,%xmm5,%xmm4 # (a0+a1)·(b0+b1)
xorps %xmm0,%xmm4
xorps %xmm2,%xmm4 # (a0+a1)·(b0+b1)-a0·b0-a1·b1
movdqa %xmm4,%xmm5
pslldq \$8,%xmm4
psrldq \$8,%xmm5
pxor %xmm4,%xmm2
pxor %xmm5,%xmm0
movdqu %xmm2,0($rp)
movdqu %xmm0,16($rp)
ret
.align 16
.Lvanilla_mul_2x2:
lea -8*17(%rsp),%rsp
.cfi_adjust_cfa_offset 8*17
___
$code.=<<___ if ($win64);
mov `8*17+40`(%rsp),$b0
mov %rdi,8*15(%rsp)
mov %rsi,8*16(%rsp)
___
$code.=<<___;
mov %r14,8*10(%rsp)
.cfi_rel_offset %r14,8*10
mov %r13,8*11(%rsp)
.cfi_rel_offset %r13,8*11
mov %r12,8*12(%rsp)
.cfi_rel_offset %r12,8*12
mov %rbp,8*13(%rsp)
.cfi_rel_offset %rbp,8*13
mov %rbx,8*14(%rsp)
.cfi_rel_offset %rbx,8*14
.Lbody_mul_2x2:
mov $rp,32(%rsp) # save the arguments
mov $a1,40(%rsp)
mov $a0,48(%rsp)
mov $b1,56(%rsp)
mov $b0,64(%rsp)
mov \$0xf,$mask
mov $a1,$a
mov $b1,$b
call _mul_1x1 # a1·b1
mov $lo,16(%rsp)
mov $hi,24(%rsp)
mov 48(%rsp),$a
mov 64(%rsp),$b
call _mul_1x1 # a0·b0
mov $lo,0(%rsp)
mov $hi,8(%rsp)
mov 40(%rsp),$a
mov 56(%rsp),$b
xor 48(%rsp),$a
xor 64(%rsp),$b
call _mul_1x1 # (a0+a1)·(b0+b1)
___
@r=("%rbx","%rcx","%rdi","%rsi");
$code.=<<___;
mov 0(%rsp),@r[0]
mov 8(%rsp),@r[1]
mov 16(%rsp),@r[2]
mov 24(%rsp),@r[3]
mov 32(%rsp),%rbp
xor $hi,$lo
xor @r[1],$hi
xor @r[0],$lo
mov @r[0],0(%rbp)
xor @r[2],$hi
mov @r[3],24(%rbp)
xor @r[3],$lo
xor @r[3],$hi
xor $hi,$lo
mov $hi,16(%rbp)
mov $lo,8(%rbp)
mov 8*10(%rsp),%r14
.cfi_restore %r14
mov 8*11(%rsp),%r13
.cfi_restore %r13
mov 8*12(%rsp),%r12
.cfi_restore %r12
mov 8*13(%rsp),%rbp
.cfi_restore %rbp
mov 8*14(%rsp),%rbx
.cfi_restore %rbx
___
$code.=<<___ if ($win64);
mov 8*15(%rsp),%rdi
mov 8*16(%rsp),%rsi
___
$code.=<<___;
lea 8*17(%rsp),%rsp
.cfi_adjust_cfa_offset -8*17
.Lepilogue_mul_2x2:
ret
.Lend_mul_2x2:
.cfi_endproc
.size bn_GF2m_mul_2x2,.-bn_GF2m_mul_2x2
.asciz "GF(2^m) Multiplication for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
.align 16
___
# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
# CONTEXT *context,DISPATCHER_CONTEXT *disp)
if ($win64) {
$rec="%rcx";
$frame="%rdx";
$context="%r8";
$disp="%r9";
$code.=<<___;
.extern __imp_RtlVirtualUnwind
.type se_handler,\@abi-omnipotent
.align 16
se_handler:
push %rsi
push %rdi
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
pushfq
sub \$64,%rsp
mov 120($context),%rax # pull context->Rax
mov 248($context),%rbx # pull context->Rip
lea .Lbody_mul_2x2(%rip),%r10
cmp %r10,%rbx # context->Rip<"prologue" label
jb .Lin_prologue
mov 152($context),%rax # pull context->Rsp
lea .Lepilogue_mul_2x2(%rip),%r10
cmp %r10,%rbx # context->Rip>="epilogue" label
jae .Lin_prologue
mov 8*10(%rax),%r14 # mimic epilogue
mov 8*11(%rax),%r13
mov 8*12(%rax),%r12
mov 8*13(%rax),%rbp
mov 8*14(%rax),%rbx
mov 8*15(%rax),%rdi
mov 8*16(%rax),%rsi
mov %rbx,144($context) # restore context->Rbx
mov %rbp,160($context) # restore context->Rbp
mov %rsi,168($context) # restore context->Rsi
mov %rdi,176($context) # restore context->Rdi
mov %r12,216($context) # restore context->R12
mov %r13,224($context) # restore context->R13
mov %r14,232($context) # restore context->R14
lea 8*17(%rax),%rax
.Lin_prologue:
mov %rax,152($context) # restore context->Rsp
mov 40($disp),%rdi # disp->ContextRecord
mov $context,%rsi # context
mov \$154,%ecx # sizeof(CONTEXT)
.long 0xa548f3fc # cld; rep movsq
mov $disp,%rsi
xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
mov 8(%rsi),%rdx # arg2, disp->ImageBase
mov 0(%rsi),%r8 # arg3, disp->ControlPc
mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
mov 40(%rsi),%r10 # disp->ContextRecord
lea 56(%rsi),%r11 # &disp->HandlerData
lea 24(%rsi),%r12 # &disp->EstablisherFrame
mov %r10,32(%rsp) # arg5
mov %r11,40(%rsp) # arg6
mov %r12,48(%rsp) # arg7
mov %rcx,56(%rsp) # arg8, (NULL)
call *__imp_RtlVirtualUnwind(%rip)
mov \$1,%eax # ExceptionContinueSearch
add \$64,%rsp
popfq
pop %r15
pop %r14
pop %r13
pop %r12
pop %rbp
pop %rbx
pop %rdi
pop %rsi
ret
.size se_handler,.-se_handler
.section .pdata
.align 4
.rva _mul_1x1
.rva .Lend_mul_1x1
.rva .LSEH_info_1x1
.rva .Lvanilla_mul_2x2
.rva .Lend_mul_2x2
.rva .LSEH_info_2x2
.section .xdata
.align 8
.LSEH_info_1x1:
.byte 0x01,0x07,0x02,0x00
.byte 0x07,0x01,0x11,0x00 # sub rsp,128+8
.LSEH_info_2x2:
.byte 9,0,0,0
.rva se_handler
___
}
$code =~ s/\`([^\`]*)\`/eval($1)/gem;
print $code;
close STDOUT or die "error closing STDOUT: $!";