openssl/crypto/bn/asm/ppc-mont.pl

1991 lines
48 KiB
Raku
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#! /usr/bin/env perl
# Copyright 2006-2020 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# April 2006
# "Teaser" Montgomery multiplication module for PowerPC. It's possible
# to gain a bit more by modulo-scheduling outer loop, then dedicated
# squaring procedure should give further 20% and code can be adapted
# for 32-bit application running on 64-bit CPU. As for the latter.
# It won't be able to achieve "native" 64-bit performance, because in
# 32-bit application context every addc instruction will have to be
# expanded as addc, twice right shift by 32 and finally adde, etc.
# So far RSA *sign* performance improvement over pre-bn_mul_mont asm
# for 64-bit application running on PPC970/G5 is:
#
# 512-bit +65%
# 1024-bit +35%
# 2048-bit +18%
# 4096-bit +4%
# September 2016
#
# Add multiplication procedure operating on lengths divisible by 4
# and squaring procedure operating on lengths divisible by 8. Length
# is expressed in number of limbs. RSA private key operations are
# ~35-50% faster (more for longer keys) on contemporary high-end POWER
# processors in 64-bit builds, [mysteriously enough] more in 32-bit
# builds. On low-end 32-bit processors performance improvement turned
# to be marginal...
$flavour = shift;
if ($flavour =~ /32/) {
$BITS= 32;
$BNSZ= $BITS/8;
$SIZE_T=4;
$RZONE= 224;
$LD= "lwz"; # load
$LDU= "lwzu"; # load and update
$LDX= "lwzx"; # load indexed
$ST= "stw"; # store
$STU= "stwu"; # store and update
$STX= "stwx"; # store indexed
$STUX= "stwux"; # store indexed and update
$UMULL= "mullw"; # unsigned multiply low
$UMULH= "mulhwu"; # unsigned multiply high
$UCMP= "cmplw"; # unsigned compare
$SHRI= "srwi"; # unsigned shift right by immediate
$SHLI= "slwi"; # unsigned shift left by immediate
$PUSH= $ST;
$POP= $LD;
} elsif ($flavour =~ /64/) {
$BITS= 64;
$BNSZ= $BITS/8;
$SIZE_T=8;
$RZONE= 288;
# same as above, but 64-bit mnemonics...
$LD= "ld"; # load
$LDU= "ldu"; # load and update
$LDX= "ldx"; # load indexed
$ST= "std"; # store
$STU= "stdu"; # store and update
$STX= "stdx"; # store indexed
$STUX= "stdux"; # store indexed and update
$UMULL= "mulld"; # unsigned multiply low
$UMULH= "mulhdu"; # unsigned multiply high
$UCMP= "cmpld"; # unsigned compare
$SHRI= "srdi"; # unsigned shift right by immediate
$SHLI= "sldi"; # unsigned shift left by immediate
$PUSH= $ST;
$POP= $LD;
} else { die "nonsense $flavour"; }
$FRAME=8*$SIZE_T+$RZONE;
$LOCALS=8*$SIZE_T;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
$sp="r1";
$toc="r2";
$rp="r3";
$ap="r4";
$bp="r5";
$np="r6";
$n0="r7";
$num="r8";
{
my $ovf=$rp;
my $rp="r9"; # $rp is reassigned
my $aj="r10";
my $nj="r11";
my $tj="r12";
# non-volatile registers
my $i="r20";
my $j="r21";
my $tp="r22";
my $m0="r23";
my $m1="r24";
my $lo0="r25";
my $hi0="r26";
my $lo1="r27";
my $hi1="r28";
my $alo="r29";
my $ahi="r30";
my $nlo="r31";
#
my $nhi="r0";
$code=<<___;
.machine "any"
.text
.globl .bn_mul_mont_int
.align 5
.bn_mul_mont_int:
mr $rp,r3 ; $rp is reassigned
li r3,0
___
$code.=<<___ if ($BNSZ==4);
cmpwi $num,32 ; longer key performance is not better
bgelr
___
$code.=<<___;
slwi $num,$num,`log($BNSZ)/log(2)`
li $tj,-4096
addi $ovf,$num,$FRAME
subf $ovf,$ovf,$sp ; $sp-$ovf
and $ovf,$ovf,$tj ; minimize TLB usage
subf $ovf,$sp,$ovf ; $ovf-$sp
mr $tj,$sp
srwi $num,$num,`log($BNSZ)/log(2)`
$STUX $sp,$sp,$ovf
$PUSH r20,`-12*$SIZE_T`($tj)
$PUSH r21,`-11*$SIZE_T`($tj)
$PUSH r22,`-10*$SIZE_T`($tj)
$PUSH r23,`-9*$SIZE_T`($tj)
$PUSH r24,`-8*$SIZE_T`($tj)
$PUSH r25,`-7*$SIZE_T`($tj)
$PUSH r26,`-6*$SIZE_T`($tj)
$PUSH r27,`-5*$SIZE_T`($tj)
$PUSH r28,`-4*$SIZE_T`($tj)
$PUSH r29,`-3*$SIZE_T`($tj)
$PUSH r30,`-2*$SIZE_T`($tj)
$PUSH r31,`-1*$SIZE_T`($tj)
$LD $n0,0($n0) ; pull n0[0] value
addi $num,$num,-2 ; adjust $num for counter register
$LD $m0,0($bp) ; m0=bp[0]
$LD $aj,0($ap) ; ap[0]
addi $tp,$sp,$LOCALS
$UMULL $lo0,$aj,$m0 ; ap[0]*bp[0]
$UMULH $hi0,$aj,$m0
$LD $aj,$BNSZ($ap) ; ap[1]
$LD $nj,0($np) ; np[0]
$UMULL $m1,$lo0,$n0 ; "tp[0]"*n0
$UMULL $alo,$aj,$m0 ; ap[1]*bp[0]
$UMULH $ahi,$aj,$m0
$UMULL $lo1,$nj,$m1 ; np[0]*m1
$UMULH $hi1,$nj,$m1
$LD $nj,$BNSZ($np) ; np[1]
addc $lo1,$lo1,$lo0
addze $hi1,$hi1
$UMULL $nlo,$nj,$m1 ; np[1]*m1
$UMULH $nhi,$nj,$m1
mtctr $num
li $j,`2*$BNSZ`
.align 4
L1st:
$LDX $aj,$ap,$j ; ap[j]
addc $lo0,$alo,$hi0
$LDX $nj,$np,$j ; np[j]
addze $hi0,$ahi
$UMULL $alo,$aj,$m0 ; ap[j]*bp[0]
addc $lo1,$nlo,$hi1
$UMULH $ahi,$aj,$m0
addze $hi1,$nhi
$UMULL $nlo,$nj,$m1 ; np[j]*m1
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0]
$UMULH $nhi,$nj,$m1
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addi $j,$j,$BNSZ ; j++
addi $tp,$tp,$BNSZ ; tp++
bdnz L1st
;L1st
addc $lo0,$alo,$hi0
addze $hi0,$ahi
addc $lo1,$nlo,$hi1
addze $hi1,$nhi
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[0]
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
li $ovf,0
addc $hi1,$hi1,$hi0
addze $ovf,$ovf ; upmost overflow bit
$ST $hi1,$BNSZ($tp)
li $i,$BNSZ
.align 4
Louter:
$LDX $m0,$bp,$i ; m0=bp[i]
$LD $aj,0($ap) ; ap[0]
addi $tp,$sp,$LOCALS
$LD $tj,$LOCALS($sp); tp[0]
$UMULL $lo0,$aj,$m0 ; ap[0]*bp[i]
$UMULH $hi0,$aj,$m0
$LD $aj,$BNSZ($ap) ; ap[1]
$LD $nj,0($np) ; np[0]
addc $lo0,$lo0,$tj ; ap[0]*bp[i]+tp[0]
$UMULL $alo,$aj,$m0 ; ap[j]*bp[i]
addze $hi0,$hi0
$UMULL $m1,$lo0,$n0 ; tp[0]*n0
$UMULH $ahi,$aj,$m0
$UMULL $lo1,$nj,$m1 ; np[0]*m1
$UMULH $hi1,$nj,$m1
$LD $nj,$BNSZ($np) ; np[1]
addc $lo1,$lo1,$lo0
$UMULL $nlo,$nj,$m1 ; np[1]*m1
addze $hi1,$hi1
$UMULH $nhi,$nj,$m1
mtctr $num
li $j,`2*$BNSZ`
.align 4
Linner:
$LDX $aj,$ap,$j ; ap[j]
addc $lo0,$alo,$hi0
$LD $tj,$BNSZ($tp) ; tp[j]
addze $hi0,$ahi
$LDX $nj,$np,$j ; np[j]
addc $lo1,$nlo,$hi1
$UMULL $alo,$aj,$m0 ; ap[j]*bp[i]
addze $hi1,$nhi
$UMULH $ahi,$aj,$m0
addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j]
$UMULL $nlo,$nj,$m1 ; np[j]*m1
addze $hi0,$hi0
$UMULH $nhi,$nj,$m1
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j]
addi $j,$j,$BNSZ ; j++
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addi $tp,$tp,$BNSZ ; tp++
bdnz Linner
;Linner
$LD $tj,$BNSZ($tp) ; tp[j]
addc $lo0,$alo,$hi0
addze $hi0,$ahi
addc $lo0,$lo0,$tj ; ap[j]*bp[i]+tp[j]
addze $hi0,$hi0
addc $lo1,$nlo,$hi1
addze $hi1,$nhi
addc $lo1,$lo1,$lo0 ; np[j]*m1+ap[j]*bp[i]+tp[j]
addze $hi1,$hi1
$ST $lo1,0($tp) ; tp[j-1]
addic $ovf,$ovf,-1 ; move upmost overflow to XER[CA]
li $ovf,0
adde $hi1,$hi1,$hi0
addze $ovf,$ovf
$ST $hi1,$BNSZ($tp)
;
slwi $tj,$num,`log($BNSZ)/log(2)`
$UCMP $i,$tj
addi $i,$i,$BNSZ
ble Louter
addi $num,$num,2 ; restore $num
subfc $j,$j,$j ; j=0 and "clear" XER[CA]
addi $tp,$sp,$LOCALS
mtctr $num
.align 4
Lsub: $LDX $tj,$tp,$j
$LDX $nj,$np,$j
subfe $aj,$nj,$tj ; tp[j]-np[j]
$STX $aj,$rp,$j
addi $j,$j,$BNSZ
bdnz Lsub
li $j,0
mtctr $num
subfe $ovf,$j,$ovf ; handle upmost overflow bit
.align 4
Lcopy: ; conditional copy
$LDX $tj,$tp,$j
$LDX $aj,$rp,$j
and $tj,$tj,$ovf
andc $aj,$aj,$ovf
$STX $j,$tp,$j ; zap at once
or $aj,$aj,$tj
$STX $aj,$rp,$j
addi $j,$j,$BNSZ
bdnz Lcopy
$POP $tj,0($sp)
li r3,1
$POP r20,`-12*$SIZE_T`($tj)
$POP r21,`-11*$SIZE_T`($tj)
$POP r22,`-10*$SIZE_T`($tj)
$POP r23,`-9*$SIZE_T`($tj)
$POP r24,`-8*$SIZE_T`($tj)
$POP r25,`-7*$SIZE_T`($tj)
$POP r26,`-6*$SIZE_T`($tj)
$POP r27,`-5*$SIZE_T`($tj)
$POP r28,`-4*$SIZE_T`($tj)
$POP r29,`-3*$SIZE_T`($tj)
$POP r30,`-2*$SIZE_T`($tj)
$POP r31,`-1*$SIZE_T`($tj)
mr $sp,$tj
blr
.long 0
.byte 0,12,4,0,0x80,12,6,0
.long 0
.size .bn_mul_mont_int,.-.bn_mul_mont_int
___
}
if (1) {
my ($a0,$a1,$a2,$a3,
$t0,$t1,$t2,$t3,
$m0,$m1,$m2,$m3,
$acc0,$acc1,$acc2,$acc3,$acc4,
$bi,$mi,$tp,$ap_end,$cnt) = map("r$_",(9..12,14..31));
my ($carry,$zero) = ($rp,"r0");
# sp----------->+-------------------------------+
# | saved sp |
# +-------------------------------+
# . .
# +8*size_t +-------------------------------+
# | 4 "n0*t0" |
# . .
# . .
# +12*size_t +-------------------------------+
# | size_t tmp[num] |
# . .
# . .
# . .
# +-------------------------------+
# | topmost carry |
# . .
# -18*size_t +-------------------------------+
# | 18 saved gpr, r14-r31 |
# . .
# . .
# +-------------------------------+
$code.=<<___;
.globl .bn_mul4x_mont_int
.align 5
.bn_mul4x_mont_int:
andi. r0,$num,7
bne .Lmul4x_do
$UCMP $ap,$bp
bne .Lmul4x_do
b .Lsqr8x_do
.Lmul4x_do:
slwi $num,$num,`log($SIZE_T)/log(2)`
mr $a0,$sp
li $a1,-32*$SIZE_T
sub $a1,$a1,$num
$STUX $sp,$sp,$a1 # alloca
$PUSH r14,-$SIZE_T*18($a0)
$PUSH r15,-$SIZE_T*17($a0)
$PUSH r16,-$SIZE_T*16($a0)
$PUSH r17,-$SIZE_T*15($a0)
$PUSH r18,-$SIZE_T*14($a0)
$PUSH r19,-$SIZE_T*13($a0)
$PUSH r20,-$SIZE_T*12($a0)
$PUSH r21,-$SIZE_T*11($a0)
$PUSH r22,-$SIZE_T*10($a0)
$PUSH r23,-$SIZE_T*9($a0)
$PUSH r24,-$SIZE_T*8($a0)
$PUSH r25,-$SIZE_T*7($a0)
$PUSH r26,-$SIZE_T*6($a0)
$PUSH r27,-$SIZE_T*5($a0)
$PUSH r28,-$SIZE_T*4($a0)
$PUSH r29,-$SIZE_T*3($a0)
$PUSH r30,-$SIZE_T*2($a0)
$PUSH r31,-$SIZE_T*1($a0)
subi $ap,$ap,$SIZE_T # bias by -1
subi $np,$np,$SIZE_T # bias by -1
subi $rp,$rp,$SIZE_T # bias by -1
$LD $n0,0($n0) # *n0
add $t0,$bp,$num
add $ap_end,$ap,$num
subi $t0,$t0,$SIZE_T*4 # &b[num-4]
$LD $bi,$SIZE_T*0($bp) # b[0]
li $acc0,0
$LD $a0,$SIZE_T*1($ap) # a[0..3]
li $acc1,0
$LD $a1,$SIZE_T*2($ap)
li $acc2,0
$LD $a2,$SIZE_T*3($ap)
li $acc3,0
$LDU $a3,$SIZE_T*4($ap)
$LD $m0,$SIZE_T*1($np) # n[0..3]
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
$PUSH $rp,$SIZE_T*6($sp) # offload rp and &b[num-4]
$PUSH $t0,$SIZE_T*7($sp)
li $carry,0
addic $tp,$sp,$SIZE_T*7 # &t[-1], clear carry bit
li $cnt,0
li $zero,0
b .Loop_mul4x_1st_reduction
.align 5
.Loop_mul4x_1st_reduction:
$UMULL $t0,$a0,$bi # lo(a[0..3]*b[0])
addze $carry,$carry # modulo-scheduled
$UMULL $t1,$a1,$bi
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$bi
andi. $cnt,$cnt,$SIZE_T*4-1
$UMULL $t3,$a3,$bi
addc $acc0,$acc0,$t0
$UMULH $t0,$a0,$bi # hi(a[0..3]*b[0])
adde $acc1,$acc1,$t1
$UMULH $t1,$a1,$bi
adde $acc2,$acc2,$t2
$UMULL $mi,$acc0,$n0 # t[0]*n0
adde $acc3,$acc3,$t3
$UMULH $t2,$a2,$bi
addze $acc4,$zero
$UMULH $t3,$a3,$bi
$LDX $bi,$bp,$cnt # next b[i] (or b[0])
addc $acc1,$acc1,$t0
# (*) mul $t0,$m0,$mi # lo(n[0..3]*t[0]*n0)
$STU $mi,$SIZE_T($tp) # put aside t[0]*n0 for tail processing
adde $acc2,$acc2,$t1
$UMULL $t1,$m1,$mi
adde $acc3,$acc3,$t2
$UMULL $t2,$m2,$mi
adde $acc4,$acc4,$t3 # can't overflow
$UMULL $t3,$m3,$mi
# (*) addc $acc0,$acc0,$t0
# (*) As for removal of first multiplication and addition
# instructions. The outcome of first addition is
# guaranteed to be zero, which leaves two computationally
# significant outcomes: it either carries or not. Then
# question is when does it carry? Is there alternative
# way to deduce it? If you follow operations, you can
# observe that condition for carry is quite simple:
# $acc0 being non-zero. So that carry can be calculated
# by adding -1 to $acc0. That's what next instruction does.
addic $acc0,$acc0,-1 # (*), discarded
$UMULH $t0,$m0,$mi # hi(n[0..3]*t[0]*n0)
adde $acc0,$acc1,$t1
$UMULH $t1,$m1,$mi
adde $acc1,$acc2,$t2
$UMULH $t2,$m2,$mi
adde $acc2,$acc3,$t3
$UMULH $t3,$m3,$mi
adde $acc3,$acc4,$carry
addze $carry,$zero
addc $acc0,$acc0,$t0
adde $acc1,$acc1,$t1
adde $acc2,$acc2,$t2
adde $acc3,$acc3,$t3
#addze $carry,$carry
bne .Loop_mul4x_1st_reduction
$UCMP $ap_end,$ap
beq .Lmul4x4_post_condition
$LD $a0,$SIZE_T*1($ap) # a[4..7]
$LD $a1,$SIZE_T*2($ap)
$LD $a2,$SIZE_T*3($ap)
$LDU $a3,$SIZE_T*4($ap)
$LD $mi,$SIZE_T*8($sp) # a[0]*n0
$LD $m0,$SIZE_T*1($np) # n[4..7]
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
b .Loop_mul4x_1st_tail
.align 5
.Loop_mul4x_1st_tail:
$UMULL $t0,$a0,$bi # lo(a[4..7]*b[i])
addze $carry,$carry # modulo-scheduled
$UMULL $t1,$a1,$bi
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$bi
andi. $cnt,$cnt,$SIZE_T*4-1
$UMULL $t3,$a3,$bi
addc $acc0,$acc0,$t0
$UMULH $t0,$a0,$bi # hi(a[4..7]*b[i])
adde $acc1,$acc1,$t1
$UMULH $t1,$a1,$bi
adde $acc2,$acc2,$t2
$UMULH $t2,$a2,$bi
adde $acc3,$acc3,$t3
$UMULH $t3,$a3,$bi
addze $acc4,$zero
$LDX $bi,$bp,$cnt # next b[i] (or b[0])
addc $acc1,$acc1,$t0
$UMULL $t0,$m0,$mi # lo(n[4..7]*a[0]*n0)
adde $acc2,$acc2,$t1
$UMULL $t1,$m1,$mi
adde $acc3,$acc3,$t2
$UMULL $t2,$m2,$mi
adde $acc4,$acc4,$t3 # can't overflow
$UMULL $t3,$m3,$mi
addc $acc0,$acc0,$t0
$UMULH $t0,$m0,$mi # hi(n[4..7]*a[0]*n0)
adde $acc1,$acc1,$t1
$UMULH $t1,$m1,$mi
adde $acc2,$acc2,$t2
$UMULH $t2,$m2,$mi
adde $acc3,$acc3,$t3
adde $acc4,$acc4,$carry
$UMULH $t3,$m3,$mi
addze $carry,$zero
addi $mi,$sp,$SIZE_T*8
$LDX $mi,$mi,$cnt # next t[0]*n0
$STU $acc0,$SIZE_T($tp) # word of result
addc $acc0,$acc1,$t0
adde $acc1,$acc2,$t1
adde $acc2,$acc3,$t2
adde $acc3,$acc4,$t3
#addze $carry,$carry
bne .Loop_mul4x_1st_tail
sub $t1,$ap_end,$num # rewinded $ap
$UCMP $ap_end,$ap # done yet?
beq .Lmul4x_proceed
$LD $a0,$SIZE_T*1($ap)
$LD $a1,$SIZE_T*2($ap)
$LD $a2,$SIZE_T*3($ap)
$LDU $a3,$SIZE_T*4($ap)
$LD $m0,$SIZE_T*1($np)
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
b .Loop_mul4x_1st_tail
.align 5
.Lmul4x_proceed:
$LDU $bi,$SIZE_T*4($bp) # *++b
addze $carry,$carry # topmost carry
$LD $a0,$SIZE_T*1($t1)
$LD $a1,$SIZE_T*2($t1)
$LD $a2,$SIZE_T*3($t1)
$LD $a3,$SIZE_T*4($t1)
addi $ap,$t1,$SIZE_T*4
sub $np,$np,$num # rewind np
$ST $acc0,$SIZE_T*1($tp) # result
$ST $acc1,$SIZE_T*2($tp)
$ST $acc2,$SIZE_T*3($tp)
$ST $acc3,$SIZE_T*4($tp)
$ST $carry,$SIZE_T*5($tp) # save topmost carry
$LD $acc0,$SIZE_T*12($sp) # t[0..3]
$LD $acc1,$SIZE_T*13($sp)
$LD $acc2,$SIZE_T*14($sp)
$LD $acc3,$SIZE_T*15($sp)
$LD $m0,$SIZE_T*1($np) # n[0..3]
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
addic $tp,$sp,$SIZE_T*7 # &t[-1], clear carry bit
li $carry,0
b .Loop_mul4x_reduction
.align 5
.Loop_mul4x_reduction:
$UMULL $t0,$a0,$bi # lo(a[0..3]*b[4])
addze $carry,$carry # modulo-scheduled
$UMULL $t1,$a1,$bi
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$bi
andi. $cnt,$cnt,$SIZE_T*4-1
$UMULL $t3,$a3,$bi
addc $acc0,$acc0,$t0
$UMULH $t0,$a0,$bi # hi(a[0..3]*b[4])
adde $acc1,$acc1,$t1
$UMULH $t1,$a1,$bi
adde $acc2,$acc2,$t2
$UMULL $mi,$acc0,$n0 # t[0]*n0
adde $acc3,$acc3,$t3
$UMULH $t2,$a2,$bi
addze $acc4,$zero
$UMULH $t3,$a3,$bi
$LDX $bi,$bp,$cnt # next b[i]
addc $acc1,$acc1,$t0
# (*) mul $t0,$m0,$mi
$STU $mi,$SIZE_T($tp) # put aside t[0]*n0 for tail processing
adde $acc2,$acc2,$t1
$UMULL $t1,$m1,$mi # lo(n[0..3]*t[0]*n0
adde $acc3,$acc3,$t2
$UMULL $t2,$m2,$mi
adde $acc4,$acc4,$t3 # can't overflow
$UMULL $t3,$m3,$mi
# (*) addc $acc0,$acc0,$t0
addic $acc0,$acc0,-1 # (*), discarded
$UMULH $t0,$m0,$mi # hi(n[0..3]*t[0]*n0
adde $acc0,$acc1,$t1
$UMULH $t1,$m1,$mi
adde $acc1,$acc2,$t2
$UMULH $t2,$m2,$mi
adde $acc2,$acc3,$t3
$UMULH $t3,$m3,$mi
adde $acc3,$acc4,$carry
addze $carry,$zero
addc $acc0,$acc0,$t0
adde $acc1,$acc1,$t1
adde $acc2,$acc2,$t2
adde $acc3,$acc3,$t3
#addze $carry,$carry
bne .Loop_mul4x_reduction
$LD $t0,$SIZE_T*5($tp) # t[4..7]
addze $carry,$carry
$LD $t1,$SIZE_T*6($tp)
$LD $t2,$SIZE_T*7($tp)
$LD $t3,$SIZE_T*8($tp)
$LD $a0,$SIZE_T*1($ap) # a[4..7]
$LD $a1,$SIZE_T*2($ap)
$LD $a2,$SIZE_T*3($ap)
$LDU $a3,$SIZE_T*4($ap)
addc $acc0,$acc0,$t0
adde $acc1,$acc1,$t1
adde $acc2,$acc2,$t2
adde $acc3,$acc3,$t3
#addze $carry,$carry
$LD $mi,$SIZE_T*8($sp) # t[0]*n0
$LD $m0,$SIZE_T*1($np) # n[4..7]
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
b .Loop_mul4x_tail
.align 5
.Loop_mul4x_tail:
$UMULL $t0,$a0,$bi # lo(a[4..7]*b[4])
addze $carry,$carry # modulo-scheduled
$UMULL $t1,$a1,$bi
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$bi
andi. $cnt,$cnt,$SIZE_T*4-1
$UMULL $t3,$a3,$bi
addc $acc0,$acc0,$t0
$UMULH $t0,$a0,$bi # hi(a[4..7]*b[4])
adde $acc1,$acc1,$t1
$UMULH $t1,$a1,$bi
adde $acc2,$acc2,$t2
$UMULH $t2,$a2,$bi
adde $acc3,$acc3,$t3
$UMULH $t3,$a3,$bi
addze $acc4,$zero
$LDX $bi,$bp,$cnt # next b[i]
addc $acc1,$acc1,$t0
$UMULL $t0,$m0,$mi # lo(n[4..7]*t[0]*n0)
adde $acc2,$acc2,$t1
$UMULL $t1,$m1,$mi
adde $acc3,$acc3,$t2
$UMULL $t2,$m2,$mi
adde $acc4,$acc4,$t3 # can't overflow
$UMULL $t3,$m3,$mi
addc $acc0,$acc0,$t0
$UMULH $t0,$m0,$mi # hi(n[4..7]*t[0]*n0)
adde $acc1,$acc1,$t1
$UMULH $t1,$m1,$mi
adde $acc2,$acc2,$t2
$UMULH $t2,$m2,$mi
adde $acc3,$acc3,$t3
$UMULH $t3,$m3,$mi
adde $acc4,$acc4,$carry
addi $mi,$sp,$SIZE_T*8
$LDX $mi,$mi,$cnt # next a[0]*n0
addze $carry,$zero
$STU $acc0,$SIZE_T($tp) # word of result
addc $acc0,$acc1,$t0
adde $acc1,$acc2,$t1
adde $acc2,$acc3,$t2
adde $acc3,$acc4,$t3
#addze $carry,$carry
bne .Loop_mul4x_tail
$LD $t0,$SIZE_T*5($tp) # next t[i] or topmost carry
sub $t1,$np,$num # rewinded np?
addze $carry,$carry
$UCMP $ap_end,$ap # done yet?
beq .Loop_mul4x_break
$LD $t1,$SIZE_T*6($tp)
$LD $t2,$SIZE_T*7($tp)
$LD $t3,$SIZE_T*8($tp)
$LD $a0,$SIZE_T*1($ap)
$LD $a1,$SIZE_T*2($ap)
$LD $a2,$SIZE_T*3($ap)
$LDU $a3,$SIZE_T*4($ap)
addc $acc0,$acc0,$t0
adde $acc1,$acc1,$t1
adde $acc2,$acc2,$t2
adde $acc3,$acc3,$t3
#addze $carry,$carry
$LD $m0,$SIZE_T*1($np) # n[4..7]
$LD $m1,$SIZE_T*2($np)
$LD $m2,$SIZE_T*3($np)
$LDU $m3,$SIZE_T*4($np)
b .Loop_mul4x_tail
.align 5
.Loop_mul4x_break:
$POP $t2,$SIZE_T*6($sp) # pull rp and &b[num-4]
$POP $t3,$SIZE_T*7($sp)
addc $a0,$acc0,$t0 # accumulate topmost carry
$LD $acc0,$SIZE_T*12($sp) # t[0..3]
addze $a1,$acc1
$LD $acc1,$SIZE_T*13($sp)
addze $a2,$acc2
$LD $acc2,$SIZE_T*14($sp)
addze $a3,$acc3
$LD $acc3,$SIZE_T*15($sp)
addze $carry,$carry # topmost carry
$ST $a0,$SIZE_T*1($tp) # result
sub $ap,$ap_end,$num # rewind ap
$ST $a1,$SIZE_T*2($tp)
$ST $a2,$SIZE_T*3($tp)
$ST $a3,$SIZE_T*4($tp)
$ST $carry,$SIZE_T*5($tp) # store topmost carry
$LD $m0,$SIZE_T*1($t1) # n[0..3]
$LD $m1,$SIZE_T*2($t1)
$LD $m2,$SIZE_T*3($t1)
$LD $m3,$SIZE_T*4($t1)
addi $np,$t1,$SIZE_T*4
$UCMP $bp,$t3 # done yet?
beq .Lmul4x_post
$LDU $bi,$SIZE_T*4($bp)
$LD $a0,$SIZE_T*1($ap) # a[0..3]
$LD $a1,$SIZE_T*2($ap)
$LD $a2,$SIZE_T*3($ap)
$LDU $a3,$SIZE_T*4($ap)
li $carry,0
addic $tp,$sp,$SIZE_T*7 # &t[-1], clear carry bit
b .Loop_mul4x_reduction
.align 5
.Lmul4x_post:
# Final step. We see if result is larger than modulus, and
# if it is, subtract the modulus. But comparison implies
# subtraction. So we subtract modulus, see if it borrowed,
# and conditionally copy original value.
srwi $cnt,$num,`log($SIZE_T)/log(2)+2`
mr $bp,$t2 # &rp[-1]
subi $cnt,$cnt,1
mr $ap_end,$t2 # &rp[-1] copy
subfc $t0,$m0,$acc0
addi $tp,$sp,$SIZE_T*15
subfe $t1,$m1,$acc1
mtctr $cnt
.Lmul4x_sub:
$LD $m0,$SIZE_T*1($np)
$LD $acc0,$SIZE_T*1($tp)
subfe $t2,$m2,$acc2
$LD $m1,$SIZE_T*2($np)
$LD $acc1,$SIZE_T*2($tp)
subfe $t3,$m3,$acc3
$LD $m2,$SIZE_T*3($np)
$LD $acc2,$SIZE_T*3($tp)
$LDU $m3,$SIZE_T*4($np)
$LDU $acc3,$SIZE_T*4($tp)
$ST $t0,$SIZE_T*1($bp)
$ST $t1,$SIZE_T*2($bp)
subfe $t0,$m0,$acc0
$ST $t2,$SIZE_T*3($bp)
$STU $t3,$SIZE_T*4($bp)
subfe $t1,$m1,$acc1
bdnz .Lmul4x_sub
$LD $a0,$SIZE_T*1($ap_end)
$ST $t0,$SIZE_T*1($bp)
$LD $t0,$SIZE_T*12($sp)
subfe $t2,$m2,$acc2
$LD $a1,$SIZE_T*2($ap_end)
$ST $t1,$SIZE_T*2($bp)
$LD $t1,$SIZE_T*13($sp)
subfe $t3,$m3,$acc3
subfe $carry,$zero,$carry # did it borrow?
addi $tp,$sp,$SIZE_T*12
$LD $a2,$SIZE_T*3($ap_end)
$ST $t2,$SIZE_T*3($bp)
$LD $t2,$SIZE_T*14($sp)
$LD $a3,$SIZE_T*4($ap_end)
$ST $t3,$SIZE_T*4($bp)
$LD $t3,$SIZE_T*15($sp)
mtctr $cnt
.Lmul4x_cond_copy:
and $t0,$t0,$carry
andc $a0,$a0,$carry
$ST $zero,$SIZE_T*0($tp) # wipe stack clean
and $t1,$t1,$carry
andc $a1,$a1,$carry
$ST $zero,$SIZE_T*1($tp)
and $t2,$t2,$carry
andc $a2,$a2,$carry
$ST $zero,$SIZE_T*2($tp)
and $t3,$t3,$carry
andc $a3,$a3,$carry
$ST $zero,$SIZE_T*3($tp)
or $acc0,$t0,$a0
$LD $a0,$SIZE_T*5($ap_end)
$LD $t0,$SIZE_T*4($tp)
or $acc1,$t1,$a1
$LD $a1,$SIZE_T*6($ap_end)
$LD $t1,$SIZE_T*5($tp)
or $acc2,$t2,$a2
$LD $a2,$SIZE_T*7($ap_end)
$LD $t2,$SIZE_T*6($tp)
or $acc3,$t3,$a3
$LD $a3,$SIZE_T*8($ap_end)
$LD $t3,$SIZE_T*7($tp)
addi $tp,$tp,$SIZE_T*4
$ST $acc0,$SIZE_T*1($ap_end)
$ST $acc1,$SIZE_T*2($ap_end)
$ST $acc2,$SIZE_T*3($ap_end)
$STU $acc3,$SIZE_T*4($ap_end)
bdnz .Lmul4x_cond_copy
$POP $bp,0($sp) # pull saved sp
and $t0,$t0,$carry
andc $a0,$a0,$carry
$ST $zero,$SIZE_T*0($tp)
and $t1,$t1,$carry
andc $a1,$a1,$carry
$ST $zero,$SIZE_T*1($tp)
and $t2,$t2,$carry
andc $a2,$a2,$carry
$ST $zero,$SIZE_T*2($tp)
and $t3,$t3,$carry
andc $a3,$a3,$carry
$ST $zero,$SIZE_T*3($tp)
or $acc0,$t0,$a0
or $acc1,$t1,$a1
$ST $zero,$SIZE_T*4($tp)
or $acc2,$t2,$a2
or $acc3,$t3,$a3
$ST $acc0,$SIZE_T*1($ap_end)
$ST $acc1,$SIZE_T*2($ap_end)
$ST $acc2,$SIZE_T*3($ap_end)
$ST $acc3,$SIZE_T*4($ap_end)
b .Lmul4x_done
.align 4
.Lmul4x4_post_condition:
$POP $ap,$SIZE_T*6($sp) # pull &rp[-1]
$POP $bp,0($sp) # pull saved sp
addze $carry,$carry # modulo-scheduled
# $acc0-3,$carry hold result, $m0-3 hold modulus
subfc $a0,$m0,$acc0
subfe $a1,$m1,$acc1
subfe $a2,$m2,$acc2
subfe $a3,$m3,$acc3
subfe $carry,$zero,$carry # did it borrow?
and $m0,$m0,$carry
and $m1,$m1,$carry
addc $a0,$a0,$m0
and $m2,$m2,$carry
adde $a1,$a1,$m1
and $m3,$m3,$carry
adde $a2,$a2,$m2
adde $a3,$a3,$m3
$ST $a0,$SIZE_T*1($ap) # write result
$ST $a1,$SIZE_T*2($ap)
$ST $a2,$SIZE_T*3($ap)
$ST $a3,$SIZE_T*4($ap)
.Lmul4x_done:
$ST $zero,$SIZE_T*8($sp) # wipe stack clean
$ST $zero,$SIZE_T*9($sp)
$ST $zero,$SIZE_T*10($sp)
$ST $zero,$SIZE_T*11($sp)
li r3,1 # signal "done"
$POP r14,-$SIZE_T*18($bp)
$POP r15,-$SIZE_T*17($bp)
$POP r16,-$SIZE_T*16($bp)
$POP r17,-$SIZE_T*15($bp)
$POP r18,-$SIZE_T*14($bp)
$POP r19,-$SIZE_T*13($bp)
$POP r20,-$SIZE_T*12($bp)
$POP r21,-$SIZE_T*11($bp)
$POP r22,-$SIZE_T*10($bp)
$POP r23,-$SIZE_T*9($bp)
$POP r24,-$SIZE_T*8($bp)
$POP r25,-$SIZE_T*7($bp)
$POP r26,-$SIZE_T*6($bp)
$POP r27,-$SIZE_T*5($bp)
$POP r28,-$SIZE_T*4($bp)
$POP r29,-$SIZE_T*3($bp)
$POP r30,-$SIZE_T*2($bp)
$POP r31,-$SIZE_T*1($bp)
mr $sp,$bp
blr
.long 0
.byte 0,12,4,0x20,0x80,18,6,0
.long 0
.size .bn_mul4x_mont_int,.-.bn_mul4x_mont_int
___
}
if (1) {
########################################################################
# Following is PPC adaptation of sqrx8x_mont from x86_64-mont5 module.
my ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("r$_",(9..12,14..17));
my ($t0,$t1,$t2,$t3)=map("r$_",(18..21));
my ($acc0,$acc1,$acc2,$acc3,$acc4,$acc5,$acc6,$acc7)=map("r$_",(22..29));
my ($cnt,$carry,$zero)=("r30","r31","r0");
my ($tp,$ap_end,$na0)=($bp,$np,$carry);
# sp----------->+-------------------------------+
# | saved sp |
# +-------------------------------+
# . .
# +12*size_t +-------------------------------+
# | size_t tmp[2*num] |
# . .
# . .
# . .
# +-------------------------------+
# . .
# -18*size_t +-------------------------------+
# | 18 saved gpr, r14-r31 |
# . .
# . .
# +-------------------------------+
$code.=<<___;
.align 5
__bn_sqr8x_mont:
.Lsqr8x_do:
mr $a0,$sp
slwi $a1,$num,`log($SIZE_T)/log(2)+1`
li $a2,-32*$SIZE_T
sub $a1,$a2,$a1
slwi $num,$num,`log($SIZE_T)/log(2)`
$STUX $sp,$sp,$a1 # alloca
$PUSH r14,-$SIZE_T*18($a0)
$PUSH r15,-$SIZE_T*17($a0)
$PUSH r16,-$SIZE_T*16($a0)
$PUSH r17,-$SIZE_T*15($a0)
$PUSH r18,-$SIZE_T*14($a0)
$PUSH r19,-$SIZE_T*13($a0)
$PUSH r20,-$SIZE_T*12($a0)
$PUSH r21,-$SIZE_T*11($a0)
$PUSH r22,-$SIZE_T*10($a0)
$PUSH r23,-$SIZE_T*9($a0)
$PUSH r24,-$SIZE_T*8($a0)
$PUSH r25,-$SIZE_T*7($a0)
$PUSH r26,-$SIZE_T*6($a0)
$PUSH r27,-$SIZE_T*5($a0)
$PUSH r28,-$SIZE_T*4($a0)
$PUSH r29,-$SIZE_T*3($a0)
$PUSH r30,-$SIZE_T*2($a0)
$PUSH r31,-$SIZE_T*1($a0)
subi $ap,$ap,$SIZE_T # bias by -1
subi $t0,$np,$SIZE_T # bias by -1
subi $rp,$rp,$SIZE_T # bias by -1
$LD $n0,0($n0) # *n0
li $zero,0
add $ap_end,$ap,$num
$LD $a0,$SIZE_T*1($ap)
#li $acc0,0
$LD $a1,$SIZE_T*2($ap)
li $acc1,0
$LD $a2,$SIZE_T*3($ap)
li $acc2,0
$LD $a3,$SIZE_T*4($ap)
li $acc3,0
$LD $a4,$SIZE_T*5($ap)
li $acc4,0
$LD $a5,$SIZE_T*6($ap)
li $acc5,0
$LD $a6,$SIZE_T*7($ap)
li $acc6,0
$LDU $a7,$SIZE_T*8($ap)
li $acc7,0
addi $tp,$sp,$SIZE_T*11 # &tp[-1]
subic. $cnt,$num,$SIZE_T*8
b .Lsqr8x_zero_start
.align 5
.Lsqr8x_zero:
subic. $cnt,$cnt,$SIZE_T*8
$ST $zero,$SIZE_T*1($tp)
$ST $zero,$SIZE_T*2($tp)
$ST $zero,$SIZE_T*3($tp)
$ST $zero,$SIZE_T*4($tp)
$ST $zero,$SIZE_T*5($tp)
$ST $zero,$SIZE_T*6($tp)
$ST $zero,$SIZE_T*7($tp)
$ST $zero,$SIZE_T*8($tp)
.Lsqr8x_zero_start:
$ST $zero,$SIZE_T*9($tp)
$ST $zero,$SIZE_T*10($tp)
$ST $zero,$SIZE_T*11($tp)
$ST $zero,$SIZE_T*12($tp)
$ST $zero,$SIZE_T*13($tp)
$ST $zero,$SIZE_T*14($tp)
$ST $zero,$SIZE_T*15($tp)
$STU $zero,$SIZE_T*16($tp)
bne .Lsqr8x_zero
$PUSH $rp,$SIZE_T*6($sp) # offload &rp[-1]
$PUSH $t0,$SIZE_T*7($sp) # offload &np[-1]
$PUSH $n0,$SIZE_T*8($sp) # offload n0
$PUSH $tp,$SIZE_T*9($sp) # &tp[2*num-1]
$PUSH $zero,$SIZE_T*10($sp) # initial top-most carry
addi $tp,$sp,$SIZE_T*11 # &tp[-1]
# Multiply everything but a[i]*a[i]
.align 5
.Lsqr8x_outer_loop:
# a[1]a[0] (i)
# a[2]a[0]
# a[3]a[0]
# a[4]a[0]
# a[5]a[0]
# a[6]a[0]
# a[7]a[0]
# a[2]a[1] (ii)
# a[3]a[1]
# a[4]a[1]
# a[5]a[1]
# a[6]a[1]
# a[7]a[1]
# a[3]a[2] (iii)
# a[4]a[2]
# a[5]a[2]
# a[6]a[2]
# a[7]a[2]
# a[4]a[3] (iv)
# a[5]a[3]
# a[6]a[3]
# a[7]a[3]
# a[5]a[4] (v)
# a[6]a[4]
# a[7]a[4]
# a[6]a[5] (vi)
# a[7]a[5]
# a[7]a[6] (vii)
$UMULL $t0,$a1,$a0 # lo(a[1..7]*a[0]) (i)
$UMULL $t1,$a2,$a0
$UMULL $t2,$a3,$a0
$UMULL $t3,$a4,$a0
addc $acc1,$acc1,$t0 # t[1]+lo(a[1]*a[0])
$UMULL $t0,$a5,$a0
adde $acc2,$acc2,$t1
$UMULL $t1,$a6,$a0
adde $acc3,$acc3,$t2
$UMULL $t2,$a7,$a0
adde $acc4,$acc4,$t3
$UMULH $t3,$a1,$a0 # hi(a[1..7]*a[0])
adde $acc5,$acc5,$t0
$UMULH $t0,$a2,$a0
adde $acc6,$acc6,$t1
$UMULH $t1,$a3,$a0
adde $acc7,$acc7,$t2
$UMULH $t2,$a4,$a0
$ST $acc0,$SIZE_T*1($tp) # t[0]
addze $acc0,$zero # t[8]
$ST $acc1,$SIZE_T*2($tp) # t[1]
addc $acc2,$acc2,$t3 # t[2]+lo(a[1]*a[0])
$UMULH $t3,$a5,$a0
adde $acc3,$acc3,$t0
$UMULH $t0,$a6,$a0
adde $acc4,$acc4,$t1
$UMULH $t1,$a7,$a0
adde $acc5,$acc5,$t2
$UMULL $t2,$a2,$a1 # lo(a[2..7]*a[1]) (ii)
adde $acc6,$acc6,$t3
$UMULL $t3,$a3,$a1
adde $acc7,$acc7,$t0
$UMULL $t0,$a4,$a1
adde $acc0,$acc0,$t1
$UMULL $t1,$a5,$a1
addc $acc3,$acc3,$t2
$UMULL $t2,$a6,$a1
adde $acc4,$acc4,$t3
$UMULL $t3,$a7,$a1
adde $acc5,$acc5,$t0
$UMULH $t0,$a2,$a1 # hi(a[2..7]*a[1])
adde $acc6,$acc6,$t1
$UMULH $t1,$a3,$a1
adde $acc7,$acc7,$t2
$UMULH $t2,$a4,$a1
adde $acc0,$acc0,$t3
$UMULH $t3,$a5,$a1
$ST $acc2,$SIZE_T*3($tp) # t[2]
addze $acc1,$zero # t[9]
$ST $acc3,$SIZE_T*4($tp) # t[3]
addc $acc4,$acc4,$t0
$UMULH $t0,$a6,$a1
adde $acc5,$acc5,$t1
$UMULH $t1,$a7,$a1
adde $acc6,$acc6,$t2
$UMULL $t2,$a3,$a2 # lo(a[3..7]*a[2]) (iii)
adde $acc7,$acc7,$t3
$UMULL $t3,$a4,$a2
adde $acc0,$acc0,$t0
$UMULL $t0,$a5,$a2
adde $acc1,$acc1,$t1
$UMULL $t1,$a6,$a2
addc $acc5,$acc5,$t2
$UMULL $t2,$a7,$a2
adde $acc6,$acc6,$t3
$UMULH $t3,$a3,$a2 # hi(a[3..7]*a[2])
adde $acc7,$acc7,$t0
$UMULH $t0,$a4,$a2
adde $acc0,$acc0,$t1
$UMULH $t1,$a5,$a2
adde $acc1,$acc1,$t2
$UMULH $t2,$a6,$a2
$ST $acc4,$SIZE_T*5($tp) # t[4]
addze $acc2,$zero # t[10]
$ST $acc5,$SIZE_T*6($tp) # t[5]
addc $acc6,$acc6,$t3
$UMULH $t3,$a7,$a2
adde $acc7,$acc7,$t0
$UMULL $t0,$a4,$a3 # lo(a[4..7]*a[3]) (iv)
adde $acc0,$acc0,$t1
$UMULL $t1,$a5,$a3
adde $acc1,$acc1,$t2
$UMULL $t2,$a6,$a3
adde $acc2,$acc2,$t3
$UMULL $t3,$a7,$a3
addc $acc7,$acc7,$t0
$UMULH $t0,$a4,$a3 # hi(a[4..7]*a[3])
adde $acc0,$acc0,$t1
$UMULH $t1,$a5,$a3
adde $acc1,$acc1,$t2
$UMULH $t2,$a6,$a3
adde $acc2,$acc2,$t3
$UMULH $t3,$a7,$a3
$ST $acc6,$SIZE_T*7($tp) # t[6]
addze $acc3,$zero # t[11]
$STU $acc7,$SIZE_T*8($tp) # t[7]
addc $acc0,$acc0,$t0
$UMULL $t0,$a5,$a4 # lo(a[5..7]*a[4]) (v)
adde $acc1,$acc1,$t1
$UMULL $t1,$a6,$a4
adde $acc2,$acc2,$t2
$UMULL $t2,$a7,$a4
adde $acc3,$acc3,$t3
$UMULH $t3,$a5,$a4 # hi(a[5..7]*a[4])
addc $acc1,$acc1,$t0
$UMULH $t0,$a6,$a4
adde $acc2,$acc2,$t1
$UMULH $t1,$a7,$a4
adde $acc3,$acc3,$t2
$UMULL $t2,$a6,$a5 # lo(a[6..7]*a[5]) (vi)
addze $acc4,$zero # t[12]
addc $acc2,$acc2,$t3
$UMULL $t3,$a7,$a5
adde $acc3,$acc3,$t0
$UMULH $t0,$a6,$a5 # hi(a[6..7]*a[5])
adde $acc4,$acc4,$t1
$UMULH $t1,$a7,$a5
addc $acc3,$acc3,$t2
$UMULL $t2,$a7,$a6 # lo(a[7]*a[6]) (vii)
adde $acc4,$acc4,$t3
$UMULH $t3,$a7,$a6 # hi(a[7]*a[6])
addze $acc5,$zero # t[13]
addc $acc4,$acc4,$t0
$UCMP $ap_end,$ap # done yet?
adde $acc5,$acc5,$t1
addc $acc5,$acc5,$t2
sub $t0,$ap_end,$num # rewinded ap
addze $acc6,$zero # t[14]
add $acc6,$acc6,$t3
beq .Lsqr8x_outer_break
mr $n0,$a0
$LD $a0,$SIZE_T*1($tp)
$LD $a1,$SIZE_T*2($tp)
$LD $a2,$SIZE_T*3($tp)
$LD $a3,$SIZE_T*4($tp)
$LD $a4,$SIZE_T*5($tp)
$LD $a5,$SIZE_T*6($tp)
$LD $a6,$SIZE_T*7($tp)
$LD $a7,$SIZE_T*8($tp)
addc $acc0,$acc0,$a0
$LD $a0,$SIZE_T*1($ap)
adde $acc1,$acc1,$a1
$LD $a1,$SIZE_T*2($ap)
adde $acc2,$acc2,$a2
$LD $a2,$SIZE_T*3($ap)
adde $acc3,$acc3,$a3
$LD $a3,$SIZE_T*4($ap)
adde $acc4,$acc4,$a4
$LD $a4,$SIZE_T*5($ap)
adde $acc5,$acc5,$a5
$LD $a5,$SIZE_T*6($ap)
adde $acc6,$acc6,$a6
$LD $a6,$SIZE_T*7($ap)
subi $rp,$ap,$SIZE_T*7
addze $acc7,$a7
$LDU $a7,$SIZE_T*8($ap)
#addze $carry,$zero # moved below
li $cnt,0
b .Lsqr8x_mul
# a[8]a[0]
# a[9]a[0]
# a[a]a[0]
# a[b]a[0]
# a[c]a[0]
# a[d]a[0]
# a[e]a[0]
# a[f]a[0]
# a[8]a[1]
# a[f]a[1]........................
# a[8]a[2]
# a[f]a[2]........................
# a[8]a[3]
# a[f]a[3]........................
# a[8]a[4]
# a[f]a[4]........................
# a[8]a[5]
# a[f]a[5]........................
# a[8]a[6]
# a[f]a[6]........................
# a[8]a[7]
# a[f]a[7]........................
.align 5
.Lsqr8x_mul:
$UMULL $t0,$a0,$n0
addze $carry,$zero # carry bit, modulo-scheduled
$UMULL $t1,$a1,$n0
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$n0
andi. $cnt,$cnt,$SIZE_T*8-1
$UMULL $t3,$a3,$n0
addc $acc0,$acc0,$t0
$UMULL $t0,$a4,$n0
adde $acc1,$acc1,$t1
$UMULL $t1,$a5,$n0
adde $acc2,$acc2,$t2
$UMULL $t2,$a6,$n0
adde $acc3,$acc3,$t3
$UMULL $t3,$a7,$n0
adde $acc4,$acc4,$t0
$UMULH $t0,$a0,$n0
adde $acc5,$acc5,$t1
$UMULH $t1,$a1,$n0
adde $acc6,$acc6,$t2
$UMULH $t2,$a2,$n0
adde $acc7,$acc7,$t3
$UMULH $t3,$a3,$n0
addze $carry,$carry
$STU $acc0,$SIZE_T($tp)
addc $acc0,$acc1,$t0
$UMULH $t0,$a4,$n0
adde $acc1,$acc2,$t1
$UMULH $t1,$a5,$n0
adde $acc2,$acc3,$t2
$UMULH $t2,$a6,$n0
adde $acc3,$acc4,$t3
$UMULH $t3,$a7,$n0
$LDX $n0,$rp,$cnt
adde $acc4,$acc5,$t0
adde $acc5,$acc6,$t1
adde $acc6,$acc7,$t2
adde $acc7,$carry,$t3
#addze $carry,$zero # moved above
bne .Lsqr8x_mul
# note that carry flag is guaranteed
# to be zero at this point
$UCMP $ap,$ap_end # done yet?
beq .Lsqr8x_break
$LD $a0,$SIZE_T*1($tp)
$LD $a1,$SIZE_T*2($tp)
$LD $a2,$SIZE_T*3($tp)
$LD $a3,$SIZE_T*4($tp)
$LD $a4,$SIZE_T*5($tp)
$LD $a5,$SIZE_T*6($tp)
$LD $a6,$SIZE_T*7($tp)
$LD $a7,$SIZE_T*8($tp)
addc $acc0,$acc0,$a0
$LD $a0,$SIZE_T*1($ap)
adde $acc1,$acc1,$a1
$LD $a1,$SIZE_T*2($ap)
adde $acc2,$acc2,$a2
$LD $a2,$SIZE_T*3($ap)
adde $acc3,$acc3,$a3
$LD $a3,$SIZE_T*4($ap)
adde $acc4,$acc4,$a4
$LD $a4,$SIZE_T*5($ap)
adde $acc5,$acc5,$a5
$LD $a5,$SIZE_T*6($ap)
adde $acc6,$acc6,$a6
$LD $a6,$SIZE_T*7($ap)
adde $acc7,$acc7,$a7
$LDU $a7,$SIZE_T*8($ap)
#addze $carry,$zero # moved above
b .Lsqr8x_mul
.align 5
.Lsqr8x_break:
$LD $a0,$SIZE_T*8($rp)
addi $ap,$rp,$SIZE_T*15
$LD $a1,$SIZE_T*9($rp)
sub. $t0,$ap_end,$ap # is it last iteration?
$LD $a2,$SIZE_T*10($rp)
sub $t1,$tp,$t0
$LD $a3,$SIZE_T*11($rp)
$LD $a4,$SIZE_T*12($rp)
$LD $a5,$SIZE_T*13($rp)
$LD $a6,$SIZE_T*14($rp)
$LD $a7,$SIZE_T*15($rp)
beq .Lsqr8x_outer_loop
$ST $acc0,$SIZE_T*1($tp)
$LD $acc0,$SIZE_T*1($t1)
$ST $acc1,$SIZE_T*2($tp)
$LD $acc1,$SIZE_T*2($t1)
$ST $acc2,$SIZE_T*3($tp)
$LD $acc2,$SIZE_T*3($t1)
$ST $acc3,$SIZE_T*4($tp)
$LD $acc3,$SIZE_T*4($t1)
$ST $acc4,$SIZE_T*5($tp)
$LD $acc4,$SIZE_T*5($t1)
$ST $acc5,$SIZE_T*6($tp)
$LD $acc5,$SIZE_T*6($t1)
$ST $acc6,$SIZE_T*7($tp)
$LD $acc6,$SIZE_T*7($t1)
$ST $acc7,$SIZE_T*8($tp)
$LD $acc7,$SIZE_T*8($t1)
mr $tp,$t1
b .Lsqr8x_outer_loop
.align 5
.Lsqr8x_outer_break:
####################################################################
# Now multiply above result by 2 and add a[n-1]*a[n-1]|...|a[0]*a[0]
$LD $a1,$SIZE_T*1($t0) # recall that $t0 is &a[-1]
$LD $a3,$SIZE_T*2($t0)
$LD $a5,$SIZE_T*3($t0)
$LD $a7,$SIZE_T*4($t0)
addi $ap,$t0,$SIZE_T*4
# "tp[x]" comments are for num==8 case
$LD $t1,$SIZE_T*13($sp) # =tp[1], t[0] is not interesting
$LD $t2,$SIZE_T*14($sp)
$LD $t3,$SIZE_T*15($sp)
$LD $t0,$SIZE_T*16($sp)
$ST $acc0,$SIZE_T*1($tp) # tp[8]=
srwi $cnt,$num,`log($SIZE_T)/log(2)+2`
$ST $acc1,$SIZE_T*2($tp)
subi $cnt,$cnt,1
$ST $acc2,$SIZE_T*3($tp)
$ST $acc3,$SIZE_T*4($tp)
$ST $acc4,$SIZE_T*5($tp)
$ST $acc5,$SIZE_T*6($tp)
$ST $acc6,$SIZE_T*7($tp)
#$ST $acc7,$SIZE_T*8($tp) # tp[15] is not interesting
addi $tp,$sp,$SIZE_T*11 # &tp[-1]
$UMULL $acc0,$a1,$a1
$UMULH $a1,$a1,$a1
add $acc1,$t1,$t1 # <<1
$SHRI $t1,$t1,$BITS-1
$UMULL $a2,$a3,$a3
$UMULH $a3,$a3,$a3
addc $acc1,$acc1,$a1
add $acc2,$t2,$t2
$SHRI $t2,$t2,$BITS-1
add $acc3,$t3,$t3
$SHRI $t3,$t3,$BITS-1
or $acc2,$acc2,$t1
mtctr $cnt
.Lsqr4x_shift_n_add:
$UMULL $a4,$a5,$a5
$UMULH $a5,$a5,$a5
$LD $t1,$SIZE_T*6($tp) # =tp[5]
$LD $a1,$SIZE_T*1($ap)
adde $acc2,$acc2,$a2
add $acc4,$t0,$t0
$SHRI $t0,$t0,$BITS-1
or $acc3,$acc3,$t2
$LD $t2,$SIZE_T*7($tp) # =tp[6]
adde $acc3,$acc3,$a3
$LD $a3,$SIZE_T*2($ap)
add $acc5,$t1,$t1
$SHRI $t1,$t1,$BITS-1
or $acc4,$acc4,$t3
$LD $t3,$SIZE_T*8($tp) # =tp[7]
$UMULL $a6,$a7,$a7
$UMULH $a7,$a7,$a7
adde $acc4,$acc4,$a4
add $acc6,$t2,$t2
$SHRI $t2,$t2,$BITS-1
or $acc5,$acc5,$t0
$LD $t0,$SIZE_T*9($tp) # =tp[8]
adde $acc5,$acc5,$a5
$LD $a5,$SIZE_T*3($ap)
add $acc7,$t3,$t3
$SHRI $t3,$t3,$BITS-1
or $acc6,$acc6,$t1
$LD $t1,$SIZE_T*10($tp) # =tp[9]
$UMULL $a0,$a1,$a1
$UMULH $a1,$a1,$a1
adde $acc6,$acc6,$a6
$ST $acc0,$SIZE_T*1($tp) # tp[0]=
add $acc0,$t0,$t0
$SHRI $t0,$t0,$BITS-1
or $acc7,$acc7,$t2
$LD $t2,$SIZE_T*11($tp) # =tp[10]
adde $acc7,$acc7,$a7
$LDU $a7,$SIZE_T*4($ap)
$ST $acc1,$SIZE_T*2($tp) # tp[1]=
add $acc1,$t1,$t1
$SHRI $t1,$t1,$BITS-1
or $acc0,$acc0,$t3
$LD $t3,$SIZE_T*12($tp) # =tp[11]
$UMULL $a2,$a3,$a3
$UMULH $a3,$a3,$a3
adde $acc0,$acc0,$a0
$ST $acc2,$SIZE_T*3($tp) # tp[2]=
add $acc2,$t2,$t2
$SHRI $t2,$t2,$BITS-1
or $acc1,$acc1,$t0
$LD $t0,$SIZE_T*13($tp) # =tp[12]
adde $acc1,$acc1,$a1
$ST $acc3,$SIZE_T*4($tp) # tp[3]=
$ST $acc4,$SIZE_T*5($tp) # tp[4]=
$ST $acc5,$SIZE_T*6($tp) # tp[5]=
$ST $acc6,$SIZE_T*7($tp) # tp[6]=
$STU $acc7,$SIZE_T*8($tp) # tp[7]=
add $acc3,$t3,$t3
$SHRI $t3,$t3,$BITS-1
or $acc2,$acc2,$t1
bdnz .Lsqr4x_shift_n_add
___
my ($np,$np_end)=($ap,$ap_end);
$code.=<<___;
$POP $np,$SIZE_T*7($sp) # pull &np[-1] and n0
$POP $n0,$SIZE_T*8($sp)
$UMULL $a4,$a5,$a5
$UMULH $a5,$a5,$a5
$ST $acc0,$SIZE_T*1($tp) # tp[8]=
$LD $acc0,$SIZE_T*12($sp) # =tp[0]
$LD $t1,$SIZE_T*6($tp) # =tp[13]
adde $acc2,$acc2,$a2
add $acc4,$t0,$t0
$SHRI $t0,$t0,$BITS-1
or $acc3,$acc3,$t2
$LD $t2,$SIZE_T*7($tp) # =tp[14]
adde $acc3,$acc3,$a3
add $acc5,$t1,$t1
$SHRI $t1,$t1,$BITS-1
or $acc4,$acc4,$t3
$UMULL $a6,$a7,$a7
$UMULH $a7,$a7,$a7
adde $acc4,$acc4,$a4
add $acc6,$t2,$t2
$SHRI $t2,$t2,$BITS-1
or $acc5,$acc5,$t0
$ST $acc1,$SIZE_T*2($tp) # tp[9]=
$LD $acc1,$SIZE_T*13($sp) # =tp[1]
adde $acc5,$acc5,$a5
or $acc6,$acc6,$t1
$LD $a0,$SIZE_T*1($np)
$LD $a1,$SIZE_T*2($np)
adde $acc6,$acc6,$a6
$LD $a2,$SIZE_T*3($np)
$LD $a3,$SIZE_T*4($np)
adde $acc7,$a7,$t2
$LD $a4,$SIZE_T*5($np)
$LD $a5,$SIZE_T*6($np)
################################################################
# Reduce by 8 limbs per iteration
$UMULL $na0,$n0,$acc0 # t[0]*n0
li $cnt,8
$LD $a6,$SIZE_T*7($np)
add $np_end,$np,$num
$LDU $a7,$SIZE_T*8($np)
$ST $acc2,$SIZE_T*3($tp) # tp[10]=
$LD $acc2,$SIZE_T*14($sp)
$ST $acc3,$SIZE_T*4($tp) # tp[11]=
$LD $acc3,$SIZE_T*15($sp)
$ST $acc4,$SIZE_T*5($tp) # tp[12]=
$LD $acc4,$SIZE_T*16($sp)
$ST $acc5,$SIZE_T*6($tp) # tp[13]=
$LD $acc5,$SIZE_T*17($sp)
$ST $acc6,$SIZE_T*7($tp) # tp[14]=
$LD $acc6,$SIZE_T*18($sp)
$ST $acc7,$SIZE_T*8($tp) # tp[15]=
$LD $acc7,$SIZE_T*19($sp)
addi $tp,$sp,$SIZE_T*11 # &tp[-1]
mtctr $cnt
b .Lsqr8x_reduction
.align 5
.Lsqr8x_reduction:
# (*) $UMULL $t0,$a0,$na0 # lo(n[0-7])*lo(t[0]*n0)
$UMULL $t1,$a1,$na0
$UMULL $t2,$a2,$na0
$STU $na0,$SIZE_T($tp) # put aside t[0]*n0 for tail processing
$UMULL $t3,$a3,$na0
# (*) addc $acc0,$acc0,$t0
addic $acc0,$acc0,-1 # (*)
$UMULL $t0,$a4,$na0
adde $acc0,$acc1,$t1
$UMULL $t1,$a5,$na0
adde $acc1,$acc2,$t2
$UMULL $t2,$a6,$na0
adde $acc2,$acc3,$t3
$UMULL $t3,$a7,$na0
adde $acc3,$acc4,$t0
$UMULH $t0,$a0,$na0 # hi(n[0-7])*lo(t[0]*n0)
adde $acc4,$acc5,$t1
$UMULH $t1,$a1,$na0
adde $acc5,$acc6,$t2
$UMULH $t2,$a2,$na0
adde $acc6,$acc7,$t3
$UMULH $t3,$a3,$na0
addze $acc7,$zero
addc $acc0,$acc0,$t0
$UMULH $t0,$a4,$na0
adde $acc1,$acc1,$t1
$UMULH $t1,$a5,$na0
adde $acc2,$acc2,$t2
$UMULH $t2,$a6,$na0
adde $acc3,$acc3,$t3
$UMULH $t3,$a7,$na0
$UMULL $na0,$n0,$acc0 # next t[0]*n0
adde $acc4,$acc4,$t0
adde $acc5,$acc5,$t1
adde $acc6,$acc6,$t2
adde $acc7,$acc7,$t3
bdnz .Lsqr8x_reduction
$LD $t0,$SIZE_T*1($tp)
$LD $t1,$SIZE_T*2($tp)
$LD $t2,$SIZE_T*3($tp)
$LD $t3,$SIZE_T*4($tp)
subi $rp,$tp,$SIZE_T*7
$UCMP $np_end,$np # done yet?
addc $acc0,$acc0,$t0
$LD $t0,$SIZE_T*5($tp)
adde $acc1,$acc1,$t1
$LD $t1,$SIZE_T*6($tp)
adde $acc2,$acc2,$t2
$LD $t2,$SIZE_T*7($tp)
adde $acc3,$acc3,$t3
$LD $t3,$SIZE_T*8($tp)
adde $acc4,$acc4,$t0
adde $acc5,$acc5,$t1
adde $acc6,$acc6,$t2
adde $acc7,$acc7,$t3
#addze $carry,$zero # moved below
beq .Lsqr8x8_post_condition
$LD $n0,$SIZE_T*0($rp)
$LD $a0,$SIZE_T*1($np)
$LD $a1,$SIZE_T*2($np)
$LD $a2,$SIZE_T*3($np)
$LD $a3,$SIZE_T*4($np)
$LD $a4,$SIZE_T*5($np)
$LD $a5,$SIZE_T*6($np)
$LD $a6,$SIZE_T*7($np)
$LDU $a7,$SIZE_T*8($np)
li $cnt,0
.align 5
.Lsqr8x_tail:
$UMULL $t0,$a0,$n0
addze $carry,$zero # carry bit, modulo-scheduled
$UMULL $t1,$a1,$n0
addi $cnt,$cnt,$SIZE_T
$UMULL $t2,$a2,$n0
andi. $cnt,$cnt,$SIZE_T*8-1
$UMULL $t3,$a3,$n0
addc $acc0,$acc0,$t0
$UMULL $t0,$a4,$n0
adde $acc1,$acc1,$t1
$UMULL $t1,$a5,$n0
adde $acc2,$acc2,$t2
$UMULL $t2,$a6,$n0
adde $acc3,$acc3,$t3
$UMULL $t3,$a7,$n0
adde $acc4,$acc4,$t0
$UMULH $t0,$a0,$n0
adde $acc5,$acc5,$t1
$UMULH $t1,$a1,$n0
adde $acc6,$acc6,$t2
$UMULH $t2,$a2,$n0
adde $acc7,$acc7,$t3
$UMULH $t3,$a3,$n0
addze $carry,$carry
$STU $acc0,$SIZE_T($tp)
addc $acc0,$acc1,$t0
$UMULH $t0,$a4,$n0
adde $acc1,$acc2,$t1
$UMULH $t1,$a5,$n0
adde $acc2,$acc3,$t2
$UMULH $t2,$a6,$n0
adde $acc3,$acc4,$t3
$UMULH $t3,$a7,$n0
$LDX $n0,$rp,$cnt
adde $acc4,$acc5,$t0
adde $acc5,$acc6,$t1
adde $acc6,$acc7,$t2
adde $acc7,$carry,$t3
#addze $carry,$zero # moved above
bne .Lsqr8x_tail
# note that carry flag is guaranteed
# to be zero at this point
$LD $a0,$SIZE_T*1($tp)
$POP $carry,$SIZE_T*10($sp) # pull top-most carry in case we break
$UCMP $np_end,$np # done yet?
$LD $a1,$SIZE_T*2($tp)
sub $t2,$np_end,$num # rewinded np
$LD $a2,$SIZE_T*3($tp)
$LD $a3,$SIZE_T*4($tp)
$LD $a4,$SIZE_T*5($tp)
$LD $a5,$SIZE_T*6($tp)
$LD $a6,$SIZE_T*7($tp)
$LD $a7,$SIZE_T*8($tp)
beq .Lsqr8x_tail_break
addc $acc0,$acc0,$a0
$LD $a0,$SIZE_T*1($np)
adde $acc1,$acc1,$a1
$LD $a1,$SIZE_T*2($np)
adde $acc2,$acc2,$a2
$LD $a2,$SIZE_T*3($np)
adde $acc3,$acc3,$a3
$LD $a3,$SIZE_T*4($np)
adde $acc4,$acc4,$a4
$LD $a4,$SIZE_T*5($np)
adde $acc5,$acc5,$a5
$LD $a5,$SIZE_T*6($np)
adde $acc6,$acc6,$a6
$LD $a6,$SIZE_T*7($np)
adde $acc7,$acc7,$a7
$LDU $a7,$SIZE_T*8($np)
#addze $carry,$zero # moved above
b .Lsqr8x_tail
.align 5
.Lsqr8x_tail_break:
$POP $n0,$SIZE_T*8($sp) # pull n0
$POP $t3,$SIZE_T*9($sp) # &tp[2*num-1]
addi $cnt,$tp,$SIZE_T*8 # end of current t[num] window
addic $carry,$carry,-1 # "move" top-most carry to carry bit
adde $t0,$acc0,$a0
$LD $acc0,$SIZE_T*8($rp)
$LD $a0,$SIZE_T*1($t2) # recall that $t2 is &n[-1]
adde $t1,$acc1,$a1
$LD $acc1,$SIZE_T*9($rp)
$LD $a1,$SIZE_T*2($t2)
adde $acc2,$acc2,$a2
$LD $a2,$SIZE_T*3($t2)
adde $acc3,$acc3,$a3
$LD $a3,$SIZE_T*4($t2)
adde $acc4,$acc4,$a4
$LD $a4,$SIZE_T*5($t2)
adde $acc5,$acc5,$a5
$LD $a5,$SIZE_T*6($t2)
adde $acc6,$acc6,$a6
$LD $a6,$SIZE_T*7($t2)
adde $acc7,$acc7,$a7
$LD $a7,$SIZE_T*8($t2)
addi $np,$t2,$SIZE_T*8
addze $t2,$zero # top-most carry
$UMULL $na0,$n0,$acc0
$ST $t0,$SIZE_T*1($tp)
$UCMP $cnt,$t3 # did we hit the bottom?
$ST $t1,$SIZE_T*2($tp)
li $cnt,8
$ST $acc2,$SIZE_T*3($tp)
$LD $acc2,$SIZE_T*10($rp)
$ST $acc3,$SIZE_T*4($tp)
$LD $acc3,$SIZE_T*11($rp)
$ST $acc4,$SIZE_T*5($tp)
$LD $acc4,$SIZE_T*12($rp)
$ST $acc5,$SIZE_T*6($tp)
$LD $acc5,$SIZE_T*13($rp)
$ST $acc6,$SIZE_T*7($tp)
$LD $acc6,$SIZE_T*14($rp)
$ST $acc7,$SIZE_T*8($tp)
$LD $acc7,$SIZE_T*15($rp)
$PUSH $t2,$SIZE_T*10($sp) # off-load top-most carry
addi $tp,$rp,$SIZE_T*7 # slide the window
mtctr $cnt
bne .Lsqr8x_reduction
################################################################
# Final step. We see if result is larger than modulus, and
# if it is, subtract the modulus. But comparison implies
# subtraction. So we subtract modulus, see if it borrowed,
# and conditionally copy original value.
$POP $rp,$SIZE_T*6($sp) # pull &rp[-1]
srwi $cnt,$num,`log($SIZE_T)/log(2)+3`
mr $n0,$tp # put tp aside
addi $tp,$tp,$SIZE_T*8
subi $cnt,$cnt,1
subfc $t0,$a0,$acc0
subfe $t1,$a1,$acc1
mr $carry,$t2
mr $ap_end,$rp # $rp copy
mtctr $cnt
b .Lsqr8x_sub
.align 5
.Lsqr8x_sub:
$LD $a0,$SIZE_T*1($np)
$LD $acc0,$SIZE_T*1($tp)
$LD $a1,$SIZE_T*2($np)
$LD $acc1,$SIZE_T*2($tp)
subfe $t2,$a2,$acc2
$LD $a2,$SIZE_T*3($np)
$LD $acc2,$SIZE_T*3($tp)
subfe $t3,$a3,$acc3
$LD $a3,$SIZE_T*4($np)
$LD $acc3,$SIZE_T*4($tp)
$ST $t0,$SIZE_T*1($rp)
subfe $t0,$a4,$acc4
$LD $a4,$SIZE_T*5($np)
$LD $acc4,$SIZE_T*5($tp)
$ST $t1,$SIZE_T*2($rp)
subfe $t1,$a5,$acc5
$LD $a5,$SIZE_T*6($np)
$LD $acc5,$SIZE_T*6($tp)
$ST $t2,$SIZE_T*3($rp)
subfe $t2,$a6,$acc6
$LD $a6,$SIZE_T*7($np)
$LD $acc6,$SIZE_T*7($tp)
$ST $t3,$SIZE_T*4($rp)
subfe $t3,$a7,$acc7
$LDU $a7,$SIZE_T*8($np)
$LDU $acc7,$SIZE_T*8($tp)
$ST $t0,$SIZE_T*5($rp)
subfe $t0,$a0,$acc0
$ST $t1,$SIZE_T*6($rp)
subfe $t1,$a1,$acc1
$ST $t2,$SIZE_T*7($rp)
$STU $t3,$SIZE_T*8($rp)
bdnz .Lsqr8x_sub
srwi $cnt,$num,`log($SIZE_T)/log(2)+2`
$LD $a0,$SIZE_T*1($ap_end) # original $rp
$LD $acc0,$SIZE_T*1($n0) # original $tp
subi $cnt,$cnt,1
$LD $a1,$SIZE_T*2($ap_end)
$LD $acc1,$SIZE_T*2($n0)
subfe $t2,$a2,$acc2
$LD $a2,$SIZE_T*3($ap_end)
$LD $acc2,$SIZE_T*3($n0)
subfe $t3,$a3,$acc3
$LD $a3,$SIZE_T*4($ap_end)
$LDU $acc3,$SIZE_T*4($n0)
$ST $t0,$SIZE_T*1($rp)
subfe $t0,$a4,$acc4
$ST $t1,$SIZE_T*2($rp)
subfe $t1,$a5,$acc5
$ST $t2,$SIZE_T*3($rp)
subfe $t2,$a6,$acc6
$ST $t3,$SIZE_T*4($rp)
subfe $t3,$a7,$acc7
$ST $t0,$SIZE_T*5($rp)
subfe $carry,$zero,$carry # did it borrow?
$ST $t1,$SIZE_T*6($rp)
$ST $t2,$SIZE_T*7($rp)
$ST $t3,$SIZE_T*8($rp)
addi $tp,$sp,$SIZE_T*11
mtctr $cnt
.Lsqr4x_cond_copy:
andc $a0,$a0,$carry
$ST $zero,-$SIZE_T*3($n0) # wipe stack clean
and $acc0,$acc0,$carry
$ST $zero,-$SIZE_T*2($n0)
andc $a1,$a1,$carry
$ST $zero,-$SIZE_T*1($n0)
and $acc1,$acc1,$carry
$ST $zero,-$SIZE_T*0($n0)
andc $a2,$a2,$carry
$ST $zero,$SIZE_T*1($tp)
and $acc2,$acc2,$carry
$ST $zero,$SIZE_T*2($tp)
andc $a3,$a3,$carry
$ST $zero,$SIZE_T*3($tp)
and $acc3,$acc3,$carry
$STU $zero,$SIZE_T*4($tp)
or $t0,$a0,$acc0
$LD $a0,$SIZE_T*5($ap_end)
$LD $acc0,$SIZE_T*1($n0)
or $t1,$a1,$acc1
$LD $a1,$SIZE_T*6($ap_end)
$LD $acc1,$SIZE_T*2($n0)
or $t2,$a2,$acc2
$LD $a2,$SIZE_T*7($ap_end)
$LD $acc2,$SIZE_T*3($n0)
or $t3,$a3,$acc3
$LD $a3,$SIZE_T*8($ap_end)
$LDU $acc3,$SIZE_T*4($n0)
$ST $t0,$SIZE_T*1($ap_end)
$ST $t1,$SIZE_T*2($ap_end)
$ST $t2,$SIZE_T*3($ap_end)
$STU $t3,$SIZE_T*4($ap_end)
bdnz .Lsqr4x_cond_copy
$POP $ap,0($sp) # pull saved sp
andc $a0,$a0,$carry
and $acc0,$acc0,$carry
andc $a1,$a1,$carry
and $acc1,$acc1,$carry
andc $a2,$a2,$carry
and $acc2,$acc2,$carry
andc $a3,$a3,$carry
and $acc3,$acc3,$carry
or $t0,$a0,$acc0
or $t1,$a1,$acc1
or $t2,$a2,$acc2
or $t3,$a3,$acc3
$ST $t0,$SIZE_T*1($ap_end)
$ST $t1,$SIZE_T*2($ap_end)
$ST $t2,$SIZE_T*3($ap_end)
$ST $t3,$SIZE_T*4($ap_end)
b .Lsqr8x_done
.align 5
.Lsqr8x8_post_condition:
$POP $rp,$SIZE_T*6($sp) # pull rp
$POP $ap,0($sp) # pull saved sp
addze $carry,$zero
# $acc0-7,$carry hold result, $a0-7 hold modulus
subfc $acc0,$a0,$acc0
subfe $acc1,$a1,$acc1
$ST $zero,$SIZE_T*12($sp) # wipe stack clean
$ST $zero,$SIZE_T*13($sp)
subfe $acc2,$a2,$acc2
$ST $zero,$SIZE_T*14($sp)
$ST $zero,$SIZE_T*15($sp)
subfe $acc3,$a3,$acc3
$ST $zero,$SIZE_T*16($sp)
$ST $zero,$SIZE_T*17($sp)
subfe $acc4,$a4,$acc4
$ST $zero,$SIZE_T*18($sp)
$ST $zero,$SIZE_T*19($sp)
subfe $acc5,$a5,$acc5
$ST $zero,$SIZE_T*20($sp)
$ST $zero,$SIZE_T*21($sp)
subfe $acc6,$a6,$acc6
$ST $zero,$SIZE_T*22($sp)
$ST $zero,$SIZE_T*23($sp)
subfe $acc7,$a7,$acc7
$ST $zero,$SIZE_T*24($sp)
$ST $zero,$SIZE_T*25($sp)
subfe $carry,$zero,$carry # did it borrow?
$ST $zero,$SIZE_T*26($sp)
$ST $zero,$SIZE_T*27($sp)
and $a0,$a0,$carry
and $a1,$a1,$carry
addc $acc0,$acc0,$a0 # add modulus back if borrowed
and $a2,$a2,$carry
adde $acc1,$acc1,$a1
and $a3,$a3,$carry
adde $acc2,$acc2,$a2
and $a4,$a4,$carry
adde $acc3,$acc3,$a3
and $a5,$a5,$carry
adde $acc4,$acc4,$a4
and $a6,$a6,$carry
adde $acc5,$acc5,$a5
and $a7,$a7,$carry
adde $acc6,$acc6,$a6
adde $acc7,$acc7,$a7
$ST $acc0,$SIZE_T*1($rp)
$ST $acc1,$SIZE_T*2($rp)
$ST $acc2,$SIZE_T*3($rp)
$ST $acc3,$SIZE_T*4($rp)
$ST $acc4,$SIZE_T*5($rp)
$ST $acc5,$SIZE_T*6($rp)
$ST $acc6,$SIZE_T*7($rp)
$ST $acc7,$SIZE_T*8($rp)
.Lsqr8x_done:
$PUSH $zero,$SIZE_T*8($sp)
$PUSH $zero,$SIZE_T*10($sp)
$POP r14,-$SIZE_T*18($ap)
li r3,1 # signal "done"
$POP r15,-$SIZE_T*17($ap)
$POP r16,-$SIZE_T*16($ap)
$POP r17,-$SIZE_T*15($ap)
$POP r18,-$SIZE_T*14($ap)
$POP r19,-$SIZE_T*13($ap)
$POP r20,-$SIZE_T*12($ap)
$POP r21,-$SIZE_T*11($ap)
$POP r22,-$SIZE_T*10($ap)
$POP r23,-$SIZE_T*9($ap)
$POP r24,-$SIZE_T*8($ap)
$POP r25,-$SIZE_T*7($ap)
$POP r26,-$SIZE_T*6($ap)
$POP r27,-$SIZE_T*5($ap)
$POP r28,-$SIZE_T*4($ap)
$POP r29,-$SIZE_T*3($ap)
$POP r30,-$SIZE_T*2($ap)
$POP r31,-$SIZE_T*1($ap)
mr $sp,$ap
blr
.long 0
.byte 0,12,4,0x20,0x80,18,6,0
.long 0
.size __bn_sqr8x_mont,.-__bn_sqr8x_mont
___
}
$code.=<<___;
.asciz "Montgomery Multiplication for PPC, CRYPTOGAMS by <appro\@openssl.org>"
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
close STDOUT or die "error closing STDOUT: $!";