#!/usr/bin/env bash
# Turn on extended globbing
shopt -s extglob
# Bail on any error
set -e

prog=$(basename $0)

print_help() {
cat <<EOF
NAME
	$prog - Escalate Asterisk logging levels

SYNOPSIS
	$prog [ --help ] | [ [ --reset ] | [
		[ --uniqueid="<uniqueid>" ]

		[ --pjsip-debug=<on|off> ] [ --sip-debug=<on|off> ]
		[ --iax2-debug=<on|off> ]

		[ --agi-debug=<on|off> ] [ --ami-debug=<on|off> ]
		[ --ari-debug=<on|off> ] [ --cdr-debug=<on|off> ]
		[ --channel-debug=<on|off> ] [ --rtp-debug=<on|off> ]
		[ --rtcp-debug=<on|off> ]

		[ --dtmf-debug=<on|off> ] [ --fax-debug=<on|off> ]
		[ --security-debug=<on|off> ]

		[ --pjsip-history=<on|off> ] [ --sip-history=<on|off> ]

		[ --verbose=<level> ] [ --debug=<level> ]
		] ]

DESCRIPTION

	Escalates log and/or debug levels on Asterisk subsystems.

	Options:

	--help
		Print this help.

	--reset
		Resets logging to the pre-escalation state.

	--uniqueid="<uniqueid>"
		Normally DATEFORMAT from ast_debug_tools.conf is used to make
		the log files unique but you can set the unique id to
		something else such as the Jira issue.  Once any logging
		is enabled, the uniqueid is stored in cli.conf so any future
		on/off commands will use the same uniqueid.  Use the --reset
		option to reset it (and everything else).

	--pjsip-debug  --sip-debug --iax2-debug --agi-debug --ami-debug
	--ari-debug --cdr-debug --channel-debug --rtp-debug --rtcp-debug
		Issues the subsystem appropriate command to turn on
		or off debugging.  These are usually functional debug messages
		such as packet dumps as opposed to code level messages and usually
		go to the VERBOSE log channel.

	--dtmf-debug --fax-debug --security-debug
		These subsystems set up their own log channels so if turned
		on, log files will be created in \$astlogdir for them.

	--pjsip-history  --sip-history
		The pjsip and sip channels have the ability to output an
		abbreviated, one-line, packet summary.  If enabled, the summaries
		will be written to \$astlogdir/pjsip_history.\$UNIQUEID and
		\$astlogdir/sip_history.\$UNIQUEID.

	--verbose-level --debug-level
		Sets the levels for their respective messages.

NOTES

	The escalator works by creating a set of startup commands in cli.conf
	that set up logger channels and issue the debug commands.  If asterisk
	is running when $prog is executed, the same commands will be issued
	to the running instance.  The original cli.conf is saved before any
	changes are made and can be restored by executing '$prog --reset'.

	The log output will be stored in...
	\$astlogdir/message.\$uniqueid
	\$astlogdir/debug.\$uniqueid
	\$astlogdir/dtmf.\$uniqueid
	\$astlogdir/fax.\$uniqueid
	\$astlogdir/security.\$uniqueid
	\$astlogdir/pjsip_history.\$uniqueid
	\$astlogdir/sip_history.\$uniqueid

EOF
	exit 1
}

PJSIP_DEBUG_SPECIFIED=false
PJSIP_HISTORY_SPECIFIED=false
SIP_DEBUG_SPECIFIED=false
SIP_HISTORY_SPECIFIED=false
IAX2_DEBUG_SPECIFIED=false
ARI_DEBUG_SPECIFIED=false
AMI_DEBUG_SPECIFIED=false
AGI_DEBUG_SPECIFIED=false
CDR_DEBUG_SPECIFIED=false
CHANNEL_DEBUG_SPECIFIED=false
RTP_DEBUG_SPECIFIED=false
RTCP_DEBUG_SPECIFIED=false
DTMF_DEBUG_SPECIFIED=false
FAX_DEBUG_SPECIFIED=false
SECURITY_DEBUG_SPECIFIED=false
DEBUG_LEVEL_SPECIFIED=false
VERBOSE_LEVEL_SPECIFIED=false
DEBUGS=false
RESET=false

declare -A DEBUG_COMMANDS=(
[PJSIP,on]="pjsip set logger on" [PJSIP,off]="pjsip set logger off"
[SIP,on]="sip set debug on" [SIP,off]="sip set debug off"
[IAX2,on]="iax2 set debug on" [IAX2,off]="iax2 set debug off"
[ARI,on]="ari set debug all on" [ARI,off]="ari set debug all off"
[AMI,on]="manager set debug on" [AMI,off]="manager set debug off"
[AGI,on]="agi set debug on" [AGI,off]="agi set debug off"
[CDR,on]="cdr set debug on" [CDR,off]="cdr set debug off"
[CHANNEL,on]="core set debug channel all" [CHANNEL,off]="core set debug channel all off"
[RTP,on]="rtp set debug on" [RTP,on]="rtp set debug off"
[RTCP,on]="rtcp set debug on" [RTCP,off]="rtcp set debug off"
)

VERBOSE_LEVELS="NOTICE,WARNING,ERROR,VERBOSE"
DEBUG_LEVELS="DEBUG"

# Read config files from least important to most important
[ -f /etc/asterisk/ast_debug_tools.conf ] && source /etc/asterisk/ast_debug_tools.conf
[ -f ~/ast_debug_tools.conf ] && source ~/ast_debug_tools.conf
[ -f ./ast_debug_tools.conf ] && source ./ast_debug_tools.conf

DATEFORMAT=${DATEFORMAT:-'date +%FT%H-%M-%S%z'}
UNIQUEID=$($DATEFORMAT)
UNIQUEID_SPECIFIED=false

for a in "$@" ; do
	case "$a" in
	--*-debug=*)
		subsystem=${a%-debug=*}
		subsystem=${subsystem#--}
		flag=${a#*=}
		if [[ ${flag,,} =~ ^y(es)?|on ]] ; then
			eval ${subsystem^^}_DEBUG=true
		else
			eval ${subsystem^^}_DEBUG=false
		fi
		eval ${subsystem^^}_DEBUG_SPECIFIED=true
		DEBUGS=true
		;;
	--pjsip-history=*)
		;&
	--sip-history=*)
		subsystem=${a%-history=*}
		subsystem=${subsystem#--}
		if [[ ${a#*=} =~ ^[Yy].* ]] ; then
			eval ${subsystem^^}_HISTORY=true
		else
			eval ${subsystem^^}_HISTORY=false
		fi
		eval ${subsystem^^}_HISTORY_SPECIFIED=true
		DEBUGS=true
		;;
	--verbose=*)
		VERBOSE_LEVEL=${a#*=}
		VERBOSE_LEVEL_SPECIFIED=true
		DEBUGS=true
		;;
	--debug=*)
		DEBUG_LEVEL=${a#*=}
		DEBUG_LEVEL_SPECIFIED=true
		DEBUGS=true
		;;
	--reset)
		RESET=true
		;;
	--uniqueid=*)
		UNIQUEID=${a#*=}
		UNIQUEID_SPECIFIED=true
		DEBUGS=true
		;;
	--help|*)
		print_help
		;;
	esac
done

if $DEBUGS && $RESET ; then
	echo "--reset must be specified by itself"
	print_help
fi

if ! $DEBUGS && ! $RESET ; then
	echo "No options specified."
	print_help
fi

ASTERISK_IS_RUNNING=false
CONFIG_DIR=/etc/asterisk
LOG_DIR=/var/log/asterisk

if [ "$(pidof asterisk)" != "" ] ; then
	CONFIG_DIR=`asterisk -rx "core show settings" | sed -n -r -e "s/^\s*Configuration\s+directory:\s+(.*)$/\1/gp"`
	LOG_DIR=`asterisk -rx "core show settings" | sed -n -r -e "s/^\s*Log\s+directory:\s+(.*)$/\1/gp"`
	ASTERISK_IS_RUNNING=true
fi
CLI_CONF="$CONFIG_DIR/cli.conf"

if [ ! -f "$CLI_CONF" ] ; then
	echo "The location of cli.conf could not be determined."
	exit 1
fi

if $RESET ; then
	if [ -f "$CLI_CONF.unescalated" ] ; then
		mv "$CLI_CONF.unescalated" "$CLI_CONF"
	fi
	if $ASTERISK_IS_RUNNING ; then
		(
		asterisk -rx "core set verbose 0"
		asterisk -rx "core set debug 0"
		asterisk -rx "pjsip set logger off"
		asterisk -rx "pjsip set history off"
		asterisk -rx "sip set debug off"
		asterisk -rx "sip set history off"
		asterisk -rx "iax2 set debug off"
		asterisk -rx "manager set debug off"
		asterisk -rx "ari set debug all off"
		asterisk -rx "agi set debug off"
		asterisk -rx "rtp set debug off"
		asterisk -rx "rtcp set debug off"
		asterisk -rx "cdr set debug off"
		asterisk -rx "core set debug channel all off"
		asterisk -rx "logger reload"
		)  >/dev/null 2>&1 || :
	fi
	exit 1
fi

if ! grep -q "; --START DEBUG_LOGGING-- ;" $CLI_CONF ; then
	VERBOSE_LOG="$LOG_DIR/message.${UNIQUEID}"
	DEBUG_LOG="$LOG_DIR/debug.${UNIQUEID}"
	PJSIP_HISTORY_LOG="$LOG_DIR/pjsip_history.${UNIQUEID}"
	SIP_HISTORY_LOG="$LOG_DIR/sip_history.${UNIQUEID}"
	DTMF_LOG="$LOG_DIR/dtmf.${UNIQUEID}"
	FAX_LOG="$LOG_DIR/fax.${UNIQUEID}"
	SECURITY_LOG="$LOG_DIR/security.${UNIQUEID}"

	cp "$CLI_CONF" "$CLI_CONF.unescalated"

	sed -i -r -e "s/\[startup_commands\]/[startup_commands_original](!)/g" "$CLI_CONF"

	cat >> "$CLI_CONF" <<-EOF
	; --START DEBUG_LOGGING-- ;

	[pjsip_debug](!)
	pjsip set logger on = yes

	[sip_debug](!)
	sip set debug on = yes

	[iax2_debug](!)
	iax2 set debug on = yes

	[ari_debug](!)
	ari set debug all on = yes

	[ami_debug](!)
	manager set debug on = yes

	[agi_debug](!)
	agi set debug on = yes

	[cdr_debug](!)
	cdr set debug on = yes

	[channel_debug](!)
	core set debug channel all = yes

	[rtp_debug](!)
	rtp set debug on = yes

	[rtcp_debug](!)
	rtcp set debug on = yes

	[dtmf_debug](!)
	logger add channel $DTMF_LOG DTMF = yes

	[fax_debug](!)
	logger add channel $FAX_LOG FAX = yes

	[security_debug](!)
	logger add channel $SECURITY_LOG SECURITY = yes

	[pjsip_history](!)
	logger add channel $PJSIP_HISTORY_LOG PJSIP_HISTORY = yes
	pjsip set history on = yes

	[sip_history](!)
	logger add channel $SIP_HISTORY_LOG SIP_HISTORY = yes
	sip set history on = yes

	[verbose_level](!)
	core set verbose 3 = yes

	[debug_level](!)
	core set debug 3 = yes

	[log_channels](!)
	logger add channel $VERBOSE_LOG NOTICE,WARNING,ERROR,VERBOSE = yes
	logger add channel $DEBUG_LOG DEBUG = yes

	[startup_commands](startup_commands_original,log_channels)

	; --END DEBUG_LOGGING-- ;
	EOF

else
	if $UNIQUEID_SPECIFIED ; then
		echo "Debug logging is already active.  Either rerun $prog without --uniqueid or with --reset to start over."
		exit 1
	fi

	VERBOSE_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/message\..+)\s+NOTICE.*@\1@p" "$CLI_CONF")
	DEBUG_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/debug\..+)\s+DEBUG.*@\1@p" "$CLI_CONF")
	PJSIP_HISTORY_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/pjsip_history\..+)\s+PJSIP.*@\1@p" "$CLI_CONF")
	SIP_HISTORY_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/sip_history\..+)\s+SIP.*@\1@p" "$CLI_CONF")
	DTMF_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/dtmf\..+)\s+DTMF.*@\1@p" "$CLI_CONF")
	FAX_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/fax\..+)\s+FAX.*@\1@p" "$CLI_CONF")
	SECURITY_LOG=$(sed -n -r -e "s@logger add channel ($LOG_DIR/security\..+)\s+SECURITY.*@\1@p" "$CLI_CONF")
fi

for x in PJSIP SIP ARI AMI AGI ARI IAX2 CDR RTP RTCP ; do
	if eval \$${x}_DEBUG_SPECIFIED ; then
		if eval \$${x}_DEBUG ; then
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "${DEBUG_COMMANDS[$x,on]}"
			fi
			egrep -q "^\[startup_commands\].*${x,,}_debug.*" "$CLI_CONF" ||
				sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_debug)/g" "$CLI_CONF"
		else
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "${DEBUG_COMMANDS[$x,off]}"
			fi
			sed -i -r -e "/\[startup_commands\].*${x,,}_debug.*/ s/,${x,,}_debug//g" "$CLI_CONF"
		fi
	fi
done

for x in DTMF FAX SECURITY ; do
	if eval \$${x}_DEBUG_SPECIFIED ; then
		if eval \$${x}_DEBUG ; then
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "$(eval "echo logger add channel \$${x}_LOG ${x}")" >/dev/null 2>&1
			fi
			egrep -q "^\[startup_commands\].*${x,,}_debug.*" "$CLI_CONF" ||
				sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_debug)/g" "$CLI_CONF"
		else
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "$(eval "echo logger remove channel \$${x}_LOG")"
			fi
			sed -i -r -e "/\[startup_commands\].*${x,,}_debug.*/ s/,${x,,}_debug//g" "$CLI_CONF"
		fi
	fi
done

for x in PJSIP SIP ; do
	if eval \$${x}_HISTORY_SPECIFIED ; then
		if eval \$${x}_HISTORY ; then
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "$(eval "echo logger add channel \$${x}_HISTORY_LOG ${x}_HISTORY")"
				asterisk -rx "${x,,} set history on"
			fi
			egrep -q "^\[startup_commands\].*${x,,}_history.*" "$CLI_CONF" ||
				sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_history)/g" "$CLI_CONF"
		else
			if $ASTERISK_IS_RUNNING ; then
				asterisk -rx "$(eval "echo logger remove channel \$${x}_HISTORY_LOG")"
				asterisk -rx "${x,,} set history off"
			fi
			sed -i -r -e "/\[startup_commands\].*${x,,}_history.*/ s/,${x,,}_history//g" "$CLI_CONF"
		fi
	fi
done

for x in VERBOSE DEBUG ; do
	if eval \$${x}_LEVEL_SPECIFIED ; then
		if $ASTERISK_IS_RUNNING ; then
			asterisk -rx "$(eval "echo logger add channel \$${x}_LOG \$${x}_LEVELS")"
			asterisk -rx "$(eval "echo core set ${x,,} \$${x}_LEVEL")"
		fi
		sed -i -r -e "$(eval "echo s/core set ${x,,} .*/core set ${x,,} \$${x}_LEVEL/g")" "$CLI_CONF"
		egrep -q "^\[startup_commands\].*${x,,}_level.*" "$CLI_CONF" ||
			sed -i -r -e "/\[startup_commands\]/ s/\((.*)\)/(\1,${x,,}_level)/g" "$CLI_CONF"
	fi
done